Changchun Institute of Optics, Fine Mechanics and Physics

Abstract Despite the various synthesis methods to obtain carbon dots (CDs), the bottom‐up methods are still the most widely administrated route to afford large‐scale and low‐cost synthesis. However, as CDs are developed with increasing reports involved in producing many CDs, the structure and property features have changed enormously compared with the first generation of CDs, raising classification concerns. To this end, a new classification of CDs, named carbonized polymer dots (CPDs), is summarized according to the analysis of structure and property features. Here, CPDs are revealed as an emerging class of CDs with distinctive polymer/carbon hybrid structures and properties. Furthermore, deep insights into the effects of synthesis on the structure/property features of CDs are provided. Herein, the synthesis methods of CDs are also summarized in detail, and the effects of synthesis conditions of the bottom‐up methods in terms of the structures and properties of CPDs are discussed and analyzed comprehensively. Insights into formation process and nucleation mechanism of CPDs are also offered. Finally, a perspective of the future development of CDs is proposed with critical insights into facilitating their potential in various application fields.

In the past few decades, there has been a wide research interest in titanium dioxide (TiO2) nanomaterials due to their applications in photocatalytic hydrogen generation and environmental pollution removal. Improving the optical absorption properties of TiO2 nanomaterials has been successfully demonstrated to enhance their photocatalytic activities, especially in the report of black TiO2 nanoparticles. The recent progress in the investigation of black TiO2 nanomaterials has been reviewed here, and special emphasis has been given on their fabrication methods along with their various chemical/physical properties and applications.

C-dots on hand: Luminescent carbon nanodots were synthesized and were shown to be biocompatible, have low toxicity, and distinctive photoluminescence properties. These C-dots are inexpensive to synthesize and could potentially be used for versatile applications, such as anticounterfeiting, information encryption, and information storage. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Multiple-color-emissive carbon dots (CDots) have potential applications in various fields such as bioimaging, light-emitting devices, and photocatalysis. The majority of the current CDots to date exhibit excitation-wavelength-dependent emissions with their maximum emission limited at the blue-light region. Here, a synthesis of multiple-color-emission CDots by controlled graphitization and surface function is reported. The CDots are synthesized through controlled thermal pyrolysis of citric acid and urea. By regulating the thermal-pyrolysis temperature and ratio of reactants, the maximum emission of the resulting CDots gradually shifts from blue to red light, covering the entire light spectrum. Specifically, the emission position of the CDots can be tuned from 430 to 630 nm through controlling the extent of graphitization and the amount of surface functional groups, COOH. The relative photoluminescence quantum yields of the CDots with blue, green, and red emission reach up to 52.6%, 35.1%, and 12.9%, respectively. Furthermore, it is demonstrated that the CDots can be uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for multiple-color- and white-light-emitting devices. This research opens a door for developing low-cost CDots as alternative phosphors for light-emitting devices.

A facile hydrothermal synthesis route to N and S, N co-doped graphene quantum dots (GQDs) was developed by using citric acid as the C source and urea or thiourea as N and S sources. Both N and S, N doped GQDs showed high quantum yield (78% and 71%), excitation independent under excitation of 340-400 nm and single exponential decay under UV excitation. A broad absorption band in the visible region appeared in S, N co-doped GQDs due to doping with sulfur, which alters the surface state of GQDs. However, S, N co-doped GQDs show different color emission under excitation of 420-520 nm due to their absorption in the visible region. The excellent photocatalytic performance of the S, N co-doped GQD/TiO2 composites was demonstrated by degradation of rhodamine B under visible light. The apparent rate of S, N:GQD/TiO2 is 3 and 10 times higher than that of N:GQD/TiO2 and P25 TiO2 under visible light irradiation, respectively.

Photoluminescent graphene quantum dots (GQDs) have received enormous attention because of their unique chemical, electronic and optical properties. Here a series of GQDs were synthesized under hydrothermal processes in order to investigate the formation process and optical properties of N-doped GQDs. Citric acid (CA) was used as a carbon precursor and self-assembled into sheet structure in a basic condition and formed N-free GQD graphite framework through intermolecular dehydrolysis reaction. N-doped GQDs were prepared using a series of N-containing bases such as urea. Detailed structural and property studies demonstrated the formation mechanism of N-doped GQDs for tunable optical emissions. Hydrothermal conditions promote formation of amide between -NH₂ and -COOH with the presence of amine in the reaction. The intramoleculur dehydrolysis between neighbour amide and COOH groups led to formation of pyrrolic N in the graphene framework. Further, the pyrrolic N transformed to graphite N under hydrothermal conditions. N-doping results in a great improvement of PL quantum yield (QY) of GQDs. By optimized reaction conditions, the highest PL QY (94%) of N-doped GQDs was obtained using CA as a carbon source and ethylene diamine as a N source. The obtained N-doped GQDs exhibit an excitation-independent blue emission with single exponential lifetime decay.

Cesium lead halide (CsPbX3) perovskite nanocrystals (NCs) have demonstrated extremely excellent optical properties and great application potentials in various optoelectronic devices. However, because of the anion exchange, it is difficult to achieve white-light and multicolor emission for practical applications. Herein, we present the successful doping of various lanthanide ions (Ce3+, Sm3+, Eu3+, Tb3+, Dy3+, Er3+, and Yb3+) into the lattices of CsPbCl3 perovskite NCs through a modified hot-injection method. For the lanthanide ions doped perovskite NCs, high photoluminescence quantum yield (QY) and stable and widely tunable multicolor emissions spanning from visible to near-infrared (NIR) regions are successfully obtained. This work indicates that the doped perovskite NCs will inherit most of the unique optical properties of lanthanide ions and deliver them to the perovskite NC host, thus endowing the family of perovskite materials with excellent optical, electric, or magnetic properties.

Benefitting from the continuous innovations in semiconductor materials and device fabricating techniques, ultraviolet (UV) photodetectors have been successfully used in advanced communications, flame detection, air purification, ozone sensing and leak detection, among others, in the past few decades. Nowadays, nanoscience, nanofabrication technologies and versatile materials have sparked a new vision of UV photodetectors, which move toward higher precision, lower energy consumption and greater miniaturization. This paper is thus mainly focused on the perspective of molding devices through exploring new materials and novel architectures inspired by state-of-the-art UV photodetectors, predicting the direction of next-generation photodetectors. It is expected that new concept UV photodetectors with smart, intelligent and multifunctional design will benefit daily life and the well-being of society in the near future.

Highly crystallized ZnO–Ga 2 O 3 core–shell heterostructure microwire is synthesized by a simple one‐step chemical vapor deposition method, and constructed into a self‐powered solar‐blind (200–280 nm) photodetector with a sharp cutoff wavelength at 266 nm. The device shows an ultrahigh responsivity (9.7 mA W −1 ) at 251 nm with a high UV/visible rejection ratio ( R 251 nm / R 400 nm ) of 6.9 × 10 2 under zero bias. The self‐powered device has a fast response speed with rise time shorter than 100 µs and decay time of 900 µs, respectively. The ultrahigh responsivity, high UV/visible rejection ratio, and fast response speed make it highly suitable in practical self‐powered solar‐blind detection. Additinoally, this microstructure heterojunction design method would provide a new approach to realize the high‐performance self‐powered photodetectors.

Carbon nanodots (C-dots) synthesized by electrochemical ablation and small molecule carbonization, as well as graphene quantum dots (GQDs) fabricated by solvothermally cutting graphene oxide, are three kinds of typical green fluorescence carbon nanomaterials. Insight into the photoluminescence origin in these fluorescent carbon nanomaterials is one of the important matters of current debates. Here, a common origin of green luminescence in these C-dots and GQDs is unraveled by ultrafast spectroscopy. According to the change of surface functional groups during surface chemical reduction experiments, which are also accompanied by obvious emission-type transform, these common green luminescence emission centers that emerge in these C-dots and GQDs synthesized by bottom-up and top-down methods are unambiguously assigned to special edge states consisting of several carbon atoms on the edge of carbon backbone and functional groups with C═O (carbonyl and carboxyl groups). Our findings further suggest that the competition among various emission centers (bright edge states) and traps dominates the optical properties of these fluorescent carbon nanomaterials.

Chromium(VI) [Cr(VI)] is considered as a severe environmental pollutant, due to its highly toxic and carcinogenic properties. Therefore, low cost, highly sensitive sensors for the determination of Cr(VI) are highly demanded. It is well-known that highly luminescent carbon dots (CDs) have been successfully applied as fluorescent nanosensors for pH, ions, and molecular substances. In the present work, we have demonstrated an on-off fluorescent CD probe for detecting Cr(VI) based on the inner filter effect (IFE) because the absorption bands of Cr(IV) fully covered the emission and excitation bands of CDs. This CD-based nanosensor provides obvious advantages of simplicity, convenience, rapid response, high selectivity, and sensitivity, which have potential application for the detection of Cr(VI) in the environmental industry. In addition, because Cr(VI) can be reduced to low valent chromium species easily by reductant, resulting in the elimination of the IFE and recovery of CD fluorescence, the CD-Cr(VI) mixture could behave as an off-on type fluorescent probe for reductant. We employed ascorbic acid (AA) as an example molecule to demonstrate this off-on type fluorescent probe.

A facile and general method has been developed to fabricate oxygen vacancies on perovskite SrTiO3 (STO) nanocrystals through a controllable solid-state reaction of NaBH4 and SrTiO3 nanocrystals. STO samples with tunable color, oxygen vacancy concentration on nanocrystal surface have been synthesized. TEM results reveal that these STO samples have a crystalline core/amorphous shell structure (SrTiO3@SrTiO3–x). XPS and EPR results disclose that the oxygen vacancy concentration increases with the increase of reaction time and temperature. The concentration of oxygen vacancies calculated from TGA data, could reach 5.07% (atom) in this study. UV–vis spectra and photocatalytic results indicate that oxygen vacancies on STO surface play an important role in influencing the light absorption and photocatalytic performance. However, an excess amount of oxygen vacancies leads to a decrease of photocatalytic performance. The optimal photocatalytic activity for H2 production under UV–vis irradiation is up to 2.2 mmol h–1 g–1, which is about 2.3 times than the original SrTiO3, corresponding to 3.28% (atom) of oxygen vacancy concentration.

Mimicking proton conduction mechanism of Nafion to construct novel proton-conducting materials with low cost and high proton conductivity is of wide interest. Herein, we have designed and synthesized a cationic covalent organic framework with high thermal and chemical stability by combining a cationic monomer, ethidium bromide (EB) (3,8-diamino-5-ethyl-6-phenylphenanthridinium bromide), with 1,3,5-triformylphloroglucinol (TFP) in Schiff base reactions. This is the first time that the stable cationic crystalline frameworks allowed for the fabrication of a series of charged COFs (EB-COF:X, X = F, Cl, Br, I) through ion exchange processes. Exchange of the extra framework ions can finely modulate the COFs' porosity and pore sizes at nanoscale. More importantly, by introducing PW12O40(3-) into this porous cationic framework, we can greatly enhance the proton conductivity of ionic COF-based material. To the best of our knowledge, EB-COF:PW12 shows the best proton conductivity at room temperature among ever reported porous organic materials.

A strategy of achieving efficient orange emissive carbon nanodots (CNDs) with large sized conjugated sp2-domain is achieved in a solvothermal synthetic route using dimethylformamide as solvent, which is the basis of orange bandgap emission; enhanced orange emission with photoluminescent quantum yield of 46% is realized through surface charges engineering by surface metal-cation-functionalization. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

All-inorganic perovskite nanocrystals (NCs) have emerged as a new generation of low-cost semiconducting luminescent system for optoelectronic applications. The room-temperature photoluminescence quantum yields (PLQYs) of these NCs in the green and red spectral range approach unity. However, their PLQYs in the violet are much lower, and an insightful understanding of such poor performance remains missing. We report a general strategy for the synthesis of all-inorganic violet-emitting perovskite NCs with near-unity PLQYs through engineering local order of the lattice by nickel ion doping. A broad range of experimental characterizations, including steady-state and time-resolved luminescence spectroscopy, X-ray absorption spectra, and magic angle spinning nuclear magnetic resonance spectra, reveal that the low PLQY in undoped NCs is associated with short-range disorder of the lattice induced by intrinsic defects such as halide vacancies and that Ni doping can substantially eliminate these defects and result in increased short-range order of the lattice. Density functional theory calculations reveal that Ni doping of perovskites causes an increase of defect formation energy and does not introduce deep trap states in the band gap, which is suggested to be the main reason for the improved local structural order and near-unity PLQY. Our ability to obtain violet-emitting perovskite NCs with near-perfect properties opens the door for a range of applications in violet-emitting perovskite-based devices such as light-emitting diodes, single-photon sources, lasers, and beyond.

AlGaN-based materials own direct transition energy bands and wide bandgap and thus can be used in high-efficiency ultraviolet (UV) emitters and detectors. Over the past two decades, AlGaN-based materials and devices experienced rapid development. Deep ultraviolet AlGaN-based light-emitting diodes (LEDs) with improved efficiency of 20.3% (at 275 nm) have been produced. An electron beam (EB)-pumped AlGaN-based UV light source at 238 nm, output power of 100 mW, and power conversion efficiency (PCE) of 40% has also been fabricated. UV stimulated emission from AlGaN multiple-quantum-wells laser diodes (LDs) using electrical pumping at room temperature has also been achieved at a wavelength of 336 nm. Compared with GaN-based blue and green LEDs and LDs, the efficiency of AlGaN-based UV LEDs and LDs is lower. Further optimization and improvements in both structure and fabrication are required to realize high-performance devices. In AlGaN-based UV photodetectors (PDs), gain as high as 104 orders of magnitude has been reported using the separated absorption and multiplication region avalanche photodiode structure but is still far from detecting the weak signal, and thus UV single-photon detectors with high detectivity is challenging. Recently, there has been extensive work in the nonlinear optical properties of AlGaN and AlGaN-based passive devices, such as waveguides and resonators. However, how to minimize the scattering and defect-related absorption needs to be further studied. In this review, first, approaches used to grow an AlGaN epilayer and p-type doping are introduced. Second, progress in AlGaN-based UV LEDs, EB-pumped light sources, LDs, PDs, passive devices, and the nonlinear optical properties are presented. Finally, an overview of potential future trends in AlGaN-based materials and UV devices is given.

A theranostic nanomedicine (CD-Oxa) is synthesized by means of the condensation reaction between the amino groups on the surface of fluorescent carbon dots (CDs) and the carboxyl group of the oxaliplatin derivative Oxa(IV)-COOH. CD-Oxa, which integrates the optical properties of CDs and the anticancer function of oxaliplatin, could be used for simultaneous drug delivery and fluorescent tracking. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

A new type of carbon dots (CD-Asp) with targeting function toward brain cancer glioma was synthesized via a straightforward pyrolysis route by using D-glucose and L-aspartic acid as starting materials. The as-prepared CD-Asp exhibits not only excellent biocompatibility and tunable full-color emission, but also significant capability of targeting C6 glioma cells without the aid of any extra targeting molecules. In vivo fluorescence images showed high-contrast biodistribution of CD-Asp 15 min after tail vein injection. A much stronger fluorescent signal was detected in the glioma site than that in normal brain, indicating their ability to freely penetrate the blood-brain barrier and precisely targeting glioma tissue. However, its counterparts, the CDs synthesized from D-glucose (CD-G), L-asparic acid (CD-A), or D-glucose and L-glutamic acid (CD-Glu) have no or low selectivity for glioma. Therefore, CD-Asp could act as a fluorescence imaging and targeting agent for noninvasive glioma diagnosis. This work highlights the potential application of CDs for constructing an intelligent nanomedicine with integration of diagnostic, targeting, and therapeutic functions.

CsPbX3 (X = Cl, Br, I) perovskite quantum dots (QDs) are potential emitting materials for illumination and display applications, but toxic Pb is not environment- and user-friendly. In this work, we demonstrate the partial replacement of Pb with Mn through phosphine-free hot-injection preparation of CsPbxMn1–xCl3 QDs in colloidal solution. The Mn substitution ratio is up to 46%, and the as-prepared QDs maintain the tetragonal crystalline structure of the CsPbCl3 host. Meaningfully, Mn substitution greatly enhances the photoluminescence quantum yields of CsPbCl3 from 5 to 54%. The enhanced emission is attributed to the energy transfer of photoinduced excitons from the CsPbCl3 host to the doped Mn, which facilitates exciton recombination via a radiative pathway. The intensity and position of this Mn-related emission are also tunable by altering the experimental parameters, such as reaction temperature and the Pb-to-Mn feed ratio. A light-emitting diode (LED) prototype is further fabricated by employing the as-prepared CsPbxMn1–xCl3 QDs as color conversion materials on a commercially available 365 nm GaN LED chip.

Carbon dots show potential in lighting and displays. However, only their fluorescence has been observed so far. Here we report the observation of phosphorescence from carbon dots in a polyvinyl alcohol matrix. The phosphorescence is attributed to C=O bonds on the surface of carbon dots and has a very long lifetime (~380 ms).