Climate Service Center

A new high-resolution regional climate change ensemble has been established for Europe within the World Climate Research Program Coordinated Regional Downscaling Experiment (EURO-CORDEX) initiative. The first set of simulations with a horizontal resolution of 12.5 km was completed for the new emission scenarios RCP4.5 and RCP8.5 with more simulations expected to follow. The aim of this paper is to present this data set to the different communities active in regional climate modelling, impact assessment and adaptation. The EURO-CORDEX ensemble results have been compared to the SRES A1B simulation results achieved within the ENSEMBLES project. The large-scale patterns of changes in mean temperature and precipitation are similar in all three scenarios, but they differ in regional details, which can partly be related to the higher resolution in EURO-CORDEX. The results strengthen those obtained in ENSEMBLES, but need further investigations. The analysis of impact indices shows that for RCP8.5, there is a substantially larger change projected for temperature-based indices than for RCP4.5. The difference is less pronounced for precipitation-based indices. Two effects of the increased resolution can be regarded as an added value of regional climate simulations. Regional climate model simulations provide higher daily precipitation intensities, which are completely missing in the global climate model simulations, and they provide a significantly different climate change of daily precipitation intensities resulting in a smoother shift from weak to moderate and high intensities.

Abstract. Damage assessments of natural hazards supply crucial information to decision support and policy development in the fields of natural hazard management and adaptation planning to climate change. Specifically, the estimation of economic flood damage is gaining greater importance as flood risk management is becoming the dominant approach of flood control policies throughout Europe. This paper reviews the state-of-the-art and identifies research directions of economic flood damage assessment. Despite the fact that considerable research effort has been spent and progress has been made on damage data collection, data analysis and model development in recent years, there still seems to be a mismatch between the relevance of damage assessments and the quality of the available models and datasets. Often, simple approaches are used, mainly due to limitations in available data and knowledge on damage mechanisms. The results of damage assessments depend on many assumptions, e.g. the selection of spatial and temporal boundaries, and there are many pitfalls in economic evaluation, e.g. the choice between replacement costs or depreciated values. Much larger efforts are required for empirical and synthetic data collection and for providing consistent, reliable data to scientists and practitioners. A major shortcoming of damage modelling is that model validation is scarcely performed. Uncertainty analyses and thorough scrutiny of model inputs and assumptions should be mandatory for each damage model development and application, respectively. In our view, flood risk assessments are often not well balanced. Much more attention is given to the hazard assessment part, whereas damage assessment is treated as some kind of appendix within the risk analysis. Advances in flood damage assessment could trigger subsequent methodological improvements in other natural hazard areas with comparable time-space properties.

Abstract. EURO-CORDEX is an international climate downscaling initiative that aims to provide high-resolution climate scenarios for Europe. Here an evaluation of the ERA-Interim-driven EURO-CORDEX regional climate model (RCM) ensemble is presented. The study documents the performance of the individual models in representing the basic spatiotemporal patterns of the European climate for the period 1989–2008. Model evaluation focuses on near-surface air temperature and precipitation, and uses the E-OBS data set as observational reference. The ensemble consists of 17 simulations carried out by seven different models at grid resolutions of 12 km (nine experiments) and 50 km (eight experiments). Several performance metrics computed from monthly and seasonal mean values are used to assess model performance over eight subdomains of the European continent. Results are compared to those for the ERA40-driven ENSEMBLES simulations. The analysis confirms the ability of RCMs to capture the basic features of the European climate, including its variability in space and time. But it also identifies nonnegligible deficiencies of the simulations for selected metrics, regions and seasons. Seasonally and regionally averaged temperature biases are mostly smaller than 1.5 °C, while precipitation biases are typically located in the ±40% range. Some bias characteristics, such as a predominant cold and wet bias in most seasons and over most parts of Europe and a warm and dry summer bias over southern and southeastern Europe reflect common model biases. For seasonal mean quantities averaged over large European subdomains, no clear benefit of an increased spatial resolution (12 vs. 50 km) can be identified. The bias ranges of the EURO-CORDEX ensemble mostly correspond to those of the ENSEMBLES simulations, but some improvements in model performance can be identified (e.g., a less pronounced southern European warm summer bias). The temperature bias spread across different configurations of one individual model can be of a similar magnitude as the spread across different models, demonstrating a strong influence of the specific choices in physical parameterizations and experimental setup on model performance. Based on a number of simply reproducible metrics, the present study quantifies the currently achievable accuracy of RCMs used for regional climate simulations over Europe and provides a quality standard for future model developments.

Increased concentrations of atmospheric greenhouse gases have led to a global mean surface temperature 1.0°C higher than during the pre-industrial period. We expand on the recent IPCC Special Report on global warming of 1.5°C and review the additional risks associated with higher levels of warming, each having major implications for multiple geographies, climates, and ecosystems. Limiting warming to 1.5°C rather than 2.0°C would be required to maintain substantial proportions of ecosystems and would have clear benefits for human health and economies. These conclusions are relevant for people everywhere, particularly in low- and middle-income countries, where the escalation of climate-related risks may prevent the achievement of the United Nations Sustainable Development Goals.

Safely achieving the goals of the Paris Climate Agreement requires a worldwide transformation to carbon-neutral societies within the next 30 y. Accelerated technological progress and policy implementations are required to deliver emissions reductions at rates sufficiently fast to avoid crossing dangerous tipping points in the Earth's climate system. Here, we discuss and evaluate the potential of social tipping interventions (STIs) that can activate contagious processes of rapidly spreading technologies, behaviors, social norms, and structural reorganization within their functional domains that we refer to as social tipping elements (STEs). STEs are subdomains of the planetary socioeconomic system where the required disruptive change may take place and lead to a sufficiently fast reduction in anthropogenic greenhouse gas emissions. The results are based on online expert elicitation, a subsequent expert workshop, and a literature review. The STIs that could trigger the tipping of STE subsystems include 1) removing fossil-fuel subsidies and incentivizing decentralized energy generation (STE1, energy production and storage systems), 2) building carbon-neutral cities (STE2, human settlements), 3) divesting from assets linked to fossil fuels (STE3, financial markets), 4) revealing the moral implications of fossil fuels (STE4, norms and value systems), 5) strengthening climate education and engagement (STE5, education system), and 6) disclosing information on greenhouse gas emissions (STE6, information feedbacks). Our research reveals important areas of focus for larger-scale empirical and modeling efforts to better understand the potentials of harnessing social tipping dynamics for climate change mitigation.

The heart of the scientific enterprise is a rational effort to understand the causes behind the phenomena we observe. In large-scale complex dynamical systems such as the Earth system, real experiments are rarely feasible. However, a rapidly increasing amount of observational and simulated data opens up the use of novel data-driven causal methods beyond the commonly adopted correlation techniques. Here, we give an overview of causal inference frameworks and identify promising generic application cases common in Earth system sciences and beyond. We discuss challenges and initiate the benchmark platform causeme.net to close the gap between method users and developers.

Abstract An ensemble of regional climate simulations is analyzed to evaluate the ability of 10 regional climate models (RCMs) and their ensemble average to simulate precipitation over Africa. All RCMs use a similar domain and spatial resolution of ~50 km and are driven by the ECMWF Interim Re-Analysis (ERA-Interim) (1989–2008). They constitute the first set of simulations in the Coordinated Regional Downscaling Experiment in Africa (CORDEX-Africa) project. Simulated precipitation is evaluated at a range of time scales, including seasonal means, and annual and diurnal cycles, against a number of detailed observational datasets. All RCMs simulate the seasonal mean and annual cycle quite accurately, although individual models can exhibit significant biases in some subregions and seasons. The multimodel average generally outperforms any individual simulation, showing biases of similar magnitude to differences across a number of observational datasets. Moreover, many of the RCMs significantly improve the precipitation climate compared to that from their boundary condition dataset, that is, ERA-Interim. A common problem in the majority of the RCMs is that precipitation is triggered too early during the diurnal cycle, although a small subset of models does have a reasonable representation of the phase of the diurnal cycle. The systematic bias in the diurnal cycle is not improved when the ensemble mean is considered. Based on this performance analysis, it is assessed that the present set of RCMs can be used to provide useful information on climate projections over Africa.

Abstract The European CORDEX (EURO-CORDEX) initiative is a large voluntary effort that seeks to advance regional climate and Earth system science in Europe. As part of the World Climate Research Programme (WCRP) - Coordinated Regional Downscaling Experiment (CORDEX), it shares the broader goals of providing a model evaluation and climate projection framework and improving communication with both the General Circulation Model (GCM) and climate data user communities. EURO-CORDEX oversees the design and coordination of ongoing ensembles of regional climate projections of unprecedented size and resolution (0.11° EUR-11 and 0.44° EUR-44 domains). Additionally, the inclusion of empirical-statistical downscaling allows investigation of much larger multi-model ensembles. These complementary approaches provide a foundation for scientific studies within the climate research community and others. The value of the EURO-CORDEX ensemble is shown via numerous peer-reviewed studies and its use in the development of climate services. Evaluations of the EUR-44 and EUR-11 ensembles also show the benefits of higher resolution. However, significant challenges remain. To further advance scientific understanding, two flagship pilot studies (FPS) were initiated. The first investigates local-regional phenomena at convection-permitting scales over central Europe and the Mediterranean in collaboration with the Med-CORDEX community. The second investigates the impacts of land cover changes on European climate across spatial and temporal scales. Over the coming years, the EURO-CORDEX community looks forward to closer collaboration with other communities, new advances, supporting international initiatives such as the IPCC reports, and continuing to provide the basis for research on regional climate impacts and adaptation in Europe.

Abstract. The COordinated Regional Downscaling EXperiment (CORDEX) is a diagnostic model intercomparison project (MIP) in CMIP6. CORDEX builds on a foundation of previous downscaling intercomparison projects to provide a common framework for downscaling activities around the world. The CORDEX Regional Challenges provide a focus for downscaling research and a basis for making use of CMIP6 global climate model (GCM) output to produce downscaled projected changes in regional climates and assess sources of uncertainties in the projections, all of which can potentially be distilled into climate change information for vulnerability, impacts and adaptation studies. CORDEX Flagship Pilot Studies advance regional downscaling by targeting one or more of the CORDEX Regional Challenges. A CORDEX-CORE framework is planned that will produce a baseline set of homogeneous high-resolution, downscaled projections for regions worldwide. In CMIP6, CORDEX coordinates with ScenarioMIP and is structured to allow cross comparisons with HighResMIP and interaction with the CMIP6 VIACS Advisory Board.

Abstract Two questions motivated this study: 1) Will meteorological droughts become more frequent and severe during the twenty-first century? 2) Given the projected global temperature rise, to what extent does the inclusion of temperature (in addition to precipitation) in drought indicators play a role in future meteorological droughts? To answer, we analyzed the changes in drought frequency, severity, and historically undocumented extreme droughts over 1981–2100, using the standardized precipitation index (SPI; including precipitation only) and standardized precipitation-evapotranspiration index (SPEI; indirectly including temperature), and under two representative concentration pathways (RCP4.5 and RCP8.5). As input data, we employed 103 high-resolution (0.44°) simulations from the Coordinated Regional Climate Downscaling Experiment (CORDEX), based on a combination of 16 global circulation models (GCMs) and 20 regional circulation models (RCMs). This is the first study on global drought projections including RCMs based on such a large ensemble of RCMs. Based on precipitation only, ~15% of the global land is likely to experience more frequent and severe droughts during 2071–2100 versus 1981–2010 for both scenarios. This increase is larger (~47% under RCP4.5, ~49% under RCP8.5) when precipitation and temperature are used. Both SPI and SPEI project more frequent and severe droughts, especially under RCP8.5, over southern South America, the Mediterranean region, southern Africa, southeastern China, Japan, and southern Australia. A decrease in drought is projected for high latitudes in Northern Hemisphere and Southeast Asia. If temperature is included, drought characteristics are projected to increase over North America, Amazonia, central Europe and Asia, the Horn of Africa, India, and central Australia; if only precipitation is considered, they are found to decrease over those areas.

A global warming of 2 C relative to pre-industrial climate has been considered as a threshold which society should endeavor to remain below, in order to limit the dangerous effects of anthropogenic climate change. The possible changes in regional climate under this target level of global warming have so far not been investigated in detail. Using an ensemble of 15 regional climate simulations downscaling six transient global climate simulations, we identify the respective time periods corresponding to 2 C global warming, describe the range of projected changes for the European climate for this level of global warming, and investigate the uncertainty across the multi-model ensemble. Robust changes in mean and extreme temperature, precipitation, winds and surface energy budgets are found based on the ensemble of simulations. The results indicate that most of Europe will experience higher warming than the global average. They also reveal strong distributional patterns across Europe, which will be important in subsequent impact assessments and adaptation responses in different countries and regions. For instance, a North-South (West-East) warming gradient is found for summer (winter) along with a general increase in heavy precipitation and summer extreme temperatures. Tying the ensemble analysis to time periods with a prescribed global temperature change rather than fixed time periods allows for the identification of more robust regional patterns of temperature changes due to removal of some of the uncertainty related to the global models' climate sensitivity.

Soil moisture observations are of broad scientific interest and practical value for a wide range of applications. The scientific community has made significant progress in estimating soil moisture from satellite-based Earth observation data, particularly in operationalizing coarse-resolution (25-50 km) soil moisture products. This review summarizes existing applications of satellite-derived soil moisture products and identifies gaps between the characteristics of currently available soil moisture products and the application requirements from various disciplines. We discuss the efforts devoted to the generation of high-resolution soil moisture products from satellite Synthetic Aperture Radar (SAR) data such as Sentinel-1 C-band backscatter observations and/or through downscaling of existing coarse-resolution microwave soil moisture products. Open issues and future opportunities of satellite-derived soil moisture are discussed, providing guidance for further development of operational soil moisture products and bridging the gap between the soil moisture user and supplier communities.

Abstract Here we present the first multi-model ensemble of regional climate simulations at kilometer-scale horizontal grid spacing over a decade long period. A total of 23 simulations run with a horizontal grid spacing of $$\sim $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mo>∼</mml:mo> </mml:math> 3 km, driven by ERA-Interim reanalysis, and performed by 22 European research groups are analysed. Six different regional climate models (RCMs) are represented in the ensemble. The simulations are compared against available high-resolution precipitation observations and coarse resolution ( $$\sim $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mo>∼</mml:mo> </mml:math> 12 km) RCMs with parameterized convection. The model simulations and observations are compared with respect to mean precipitation, precipitation intensity and frequency, and heavy precipitation on daily and hourly timescales in different seasons. The results show that kilometer-scale models produce a more realistic representation of precipitation than the coarse resolution RCMs. The most significant improvements are found for heavy precipitation and precipitation frequency on both daily and hourly time scales in the summer season. In general, kilometer-scale models tend to produce more intense precipitation and reduced wet-hour frequency compared to coarse resolution models. On average, the multi-model mean shows a reduction of bias from $$\sim \,$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mo>∼</mml:mo> <mml:mspace/> </mml:mrow> </mml:math> −40% at 12 km to $$\sim \,$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mo>∼</mml:mo> <mml:mspace/> </mml:mrow> </mml:math> −3% at 3 km for heavy hourly precipitation in summer. Furthermore, the uncertainty ranges i.e. the variability between the models for wet hour frequency is reduced by half with the use of kilometer-scale models. Although differences between the model simulations at the kilometer-scale and observations still exist, it is evident that these simulations are superior to the coarse-resolution RCM simulations in the representing precipitation in the present-day climate, and thus offer a promising way forward for investigations of climate and climate change at local to regional scales.

The transferability of the regional climate model REMO with a standard setup over different regions of the world has been evaluated. The study is based on the idea that the modeling parameters and parameterizations in a regional climate model should be robust to adequately simulate the major climatic characteristic of different regions around the globe. If a model is not able to do that, there might be a chance of an “overtuning” to the “home-region”, which means that the model physics are tuned in a way that it might cover some more fundamental errors, e.g., in the dynamics. All simulations carried out in this study contribute to the joint effort by the international regional downscaling community called COordinated Regional climate Downscaling EXperiment (CORDEX). REMO has been integrated over six CORDEX domains forced with the so-called perfect boundary conditions obtained from the global reanalysis dataset ERA-Interim for the period 1989 to 2008. These six domains include Africa, Europe, North America, South America, West Asia and the Mediterranean region. Each of the six simulations was conducted with the identical model setup which allows investigating the transferability of a single model to regions with substantially different climate characteristics. For the consistent evaluation over the different domains, a new evaluation framework is presented by combining the Köppen-Trewartha climate classification with temperature-precipitation relationship plots and a probability density function (PDF) skill score method. The evaluation of the spatial and temporal characteristics of simulated precipitation and temperature, in comparison to observational datasets, shows that REMO is able to simulate the mean annual climatic features over all the domains quite reasonably, but still some biases remain. The regions over the Amazon and near the coast of major upwelling regions have a significant warm bias. Wet and dry biases appear over the mountainous regions and East Africa, respectively. The temperature over South America and precipitation over the tundra and highland climate of West Asia are misrepresented. The probable causes leading to these biases are discussed and ideas for improvements are suggested. The annual cycle of precipitation and temperature of major catchments in each domain are also well represented by REMO. The model has performed well in simulating the inter- and intra-seasonal characteristics of different climate types in different regions. Moreover, the model has a high ability in representing the general characteristics of different climate types as measured by the probability density function (PDF) skill score method. Although REMO seems to perform best over its home domain in Europe (domain of development and testing), the model has simulated quite well the climate characteristics of other regions with the same set of parameterization options. Therefore, these results lead us to the conclusion that REMO is well suited for long-term climate change simulations to examine projected future changes in all these regions.

Abstract The use of regional climate model (RCM)‐based projections for providing regional climate information in a research and climate service contexts is currently expanding very fast. This has been possible thanks to a considerable effort in developing comprehensive ensembles of RCM projections, especially for Europe, in the EURO‐CORDEX community (Jacob et al., 2014, 2020). As of end of 2019, EURO‐CORDEX has developed a set of 55 historical and scenario projections (RCP8.5) using 8 driving global climate models (GCMs) and 11 RCMs. This article presents the ensemble including its design. We target the analysis to better characterize the quality of the RCMs by providing an evaluation of these RCM simulations over a number of classical climate variables and extreme and impact‐oriented indices for the period 1981–2010. For the main variables, the model simulations generally agree with observations and reanalyses. However, several systematic biases are found as well, with shared responsibilities among RCMs and GCMs: Simulations are overall too cold, too wet, and too windy compared to available observations or reanalyses. Some simulations show strong systematic biases on temperature, others on precipitation or dynamical variables, but none of the models/simulations can be defined as the best or the worst on all criteria. The article aims at supporting a proper use of these simulations within a climate services context.

Abstract This paper analyzes the ensemble of regional climate model (RCM) projections for Europe completed within the EURO‐CORDEX project. Projections are available for the two greenhouse gas concentration scenarios RCP2.6 (22 members) and RCP8.5 (55 members) at 0.11° resolution from 11 RCMs driven by eight global climate models (GCMs). The RCM ensemble results are compared with the driving CMIP5 global models but also with a subset of available last generation CMIP6 projections. Maximum warming is projected by all ensembles in Northern Europe in winter, along with a maximum precipitation increase there; in summer, maximum warming occurs in the Mediterranean and Southern European regions associated with a maximum precipitation decrease. The CMIP6 ensemble shows the largest signals, both for temperature and precipitation, along with the largest inter‐model spread. There is a high model consensus across the ensembles on an increase of extreme precipitation and drought frequency in the Mediterranean region. Extreme temperature indices show an increase of heat extremes and a decrease of cold extremes, with CMIP6 showing the highest values and EURO‐CORDEX the finest spatial details. This data set of unprecedented size and quality will provide the basis for impact assessment and climate service activities for the European region.

Abstract. The global chemistry-climate model CAM-Chem has been extended to incorporate an expanded bromine and iodine chemistry scheme that includes natural oceanic sources of very short-lived (VSL) halocarbons, gas-phase photochemistry and heterogeneous reactions on aerosols. Ocean emissions of five VSL bromocarbons (CHBr3, CH2Br2, CH2BrCl, CHBrCl2, CHBr2Cl) and three VSL iodocarbons (CH2ICl, CH2IBr, CH2I2) have been parameterised by a biogenic chlorophyll-a (chl-a) dependent source in the tropical oceans (20° N–20° S). Constant oceanic fluxes with 2.5 coast-to-ocean emission ratios are separately imposed on four different latitudinal bands in the extratropics (20°–50° and above 50° in both hemispheres). Top-down emission estimates of bromocarbons have been derived using available measurements in the troposphere and lower stratosphere, while iodocarbons have been constrained with observations in the marine boundary layer (MBL). Emissions of CH3I are based on a previous inventory and the longer lived CH3Br is set to a surface mixing ratio boundary condition. The global oceanic emissions estimated for the most abundant VSL bromocarbons – 533 Gg yr−1 for CHBr3 and 67.3 Gg yr−1 for CH2Br2 – are within the range of previous estimates. Overall the latitudinal and vertical distributions of modelled bromocarbons are in good agreement with observations. Nevertheless, we identify some issues such as the reduced number of aircraft observations to validate models in the Southern Hemisphere, the overestimation of CH2Br2 in the upper troposphere – lower stratosphere and the underestimation of CH3I in the same region. Despite the difficulties involved in the global modelling of the shortest lived iodocarbons (CH2ICl, CH2IBr, CH2I2), modelled results are in good agreement with published observations in the MBL. Finally, sensitivity simulations show that knowledge of the diurnal emission cycle for these species, in particular for CH2I2, is key to assess their global source strength.

The World Urban Database and Access Portal Tools (WUDAPT) project has grown out of the need for better information on the form and function of cities globally. Cities are described using Local Climate Zones (LCZ), which are associated with a range of key urban climate model parameters and thus can serve as inputs to high resolution urban climate models. We refer to this as level 0 data for each city. The LCZ level 0 product is produced using freely available Landsat imagery, crowdsourced training areas from the community, and the open source SAGA software. This paper outlines the protocol by which LCZ maps generated by different members of the community are produced and evaluated. In particular, the quality assessment comprises cross-validation, review, and cross-comparison with other data sets. To date, the results from the different quality assessments show that the LCZ maps are generally of moderate quality, i.e. 50–60% overall accuracy (OA), but this is much higher when considering all built-up classes together or using weights that take the morphological and climatic similarity of certain classes into account. The training data contributed by researchers from around the world also vary in quality and in the interpretation of the landscape, which affects the final quality of the LCZ maps. The acceptable level of quality needed will depend heavily on the application of the data. However, initial modelling studies that use the level 0 products as inputs showed improved performance in simulating the urban climate when replacing the default surface descriptions with the WUDAPT level 0 data. This is also promising for the application of level 0 data in regional and global climate and weather models and supports the assumption that the current level 0 products are already of sufficient quality for certain applications. Moreover, there are various ongoing developments to improve the methods used to produce LCZ maps and their accuracy.

Citizen-driven Renewable Energy (RE) projects of various kinds, known collectively as community energy (CE), have an important part to play in the worldwide transition to cleaner energy systems. On the basis of evidence from 8 European countries, we investigate CE, over approximately the last 50 years (c.1970-2018), through the lens of Social Innovation (SI). We carry out a detailed review of literature around the social dimension of renewable energy; we collect, describe and map CE initiatives from Belgium, France, Germany, Italy, Poland, Spain, Sweden and the UK; and we unpack the SI concept into 4 operational criteria which we suggest are essential to recognising SI in CE. These are: 1) Crises and opportunities; 2) the agency of civil society; 3) reconfiguration of social practices, institutions and networks; 4) new ways of working. We identify three main phases of SI in CE. The environmental movements of the 1960s and the “oil shocks” of the 1970s provided the catalyst for a series of innovative societal responses around energy and self-sufficiency. A second wave of SI relates to the mainstreaming of RE and associated government support mechanisms. In this phase, with some important exceptions, successful CE initiatives were mainly confined to those countries where they were already embedded as innovators in the previous phase. The third phase of CE innovation relates to the societal response to the Great Recession that began in 2007-8 and lasted most of the subsequent decade. CE initiatives formed around this time were also strongly focused around democratization of energy and citizen empowerment in the context of rising energy prices, a weak economy, and a production and supply system dominated by excessively powerful multinational energy firms. CE initiatives today are more diverse than at any time previously, and are likely to continue to act as incubators for pioneering initiatives addressing virtually all aspects of energy. However, large multinational energy firms remain the dominant vehicle for delivery of the energy transition, and the apparent excitement in European policy circles for “community energy” does not extend to democratization of energy or genuine empowerment of citizens.

Abstract. Because of the slow accumulation and long residence time of carbon in biomass and soils, the present state and future dynamics of temperate forests are influenced by management that took place centuries to millennia ago. Humans have exploited the forests of Europe for fuel, construction materials and fodder for the entire Holocene. In recent centuries, economic and demographic trends led to increases in both forest area and management intensity across much of Europe. In order to quantify the effects of these changes in forests and to provide a baseline for studies on future land-cover–climate interactions and biogeochemical cycling, we created a temporally and spatially resolved reconstruction of European forest management from 1600 to 2010. For the period 1600–1828, we took a supply–demand approach, in which supply was estimated on the basis of historical annual wood increment and land cover reconstructions. We made demand estimates by multiplying population with consumption factors for construction materials, household fuelwood, industrial food processing and brewing, metallurgy, and salt production. For the period 1829–2010, we used a supply-driven backcasting method based on national and regional statistics of forest age structure from the second half of the 20th century. Our reconstruction reproduces the most important changes in forest management between 1600 and 2010: (1) an increase of 593 000 km2 in conifers at the expense of deciduous forest (decreasing by 538 000 km2); (2) a 612 000 km2 decrease in unmanaged forest; (3) a 152 000 km2 decrease in coppice management; (4) a 818 000 km2 increase in high-stand management; and (5) the rise and fall of litter raking, which at its peak in 1853 resulted in the removal of 50 Tg dry litter per year.