Czech Academy of Sciences, Institute of Chemical Process Fundamentals

The science around the use of masks by the public to impede COVID-19 transmission is advancing rapidly. In this narrative review, we develop an analytical framework to examine mask usage, synthesizing the relevant literature to inform multiple areas: population impact, transmission characteristics, source control, wearer protection, sociological considerations, and implementation considerations. A primary route of transmission of COVID-19 is via respiratory particles, and it is known to be transmissible from presymptomatic, paucisymptomatic, and asymptomatic individuals. Reducing disease spread requires two things: limiting contacts of infected individuals via physical distancing and other measures and reducing the transmission probability per contact. The preponderance of evidence indicates that mask wearing reduces transmissibility per contact by reducing transmission of infected respiratory particles in both laboratory and clinical contexts. Public mask wearing is most effective at reducing spread of the virus when compliance is high. Given the current shortages of medical masks, we recommend the adoption of public cloth mask wearing, as an effective form of source control, in conjunction with existing hygiene, distancing, and contact tracing strategies. Because many respiratory particles become smaller due to evaporation, we recommend increasing focus on a previously overlooked aspect of mask usage: mask wearing by infectious people ("source control") with benefits at the population level, rather than only mask wearing by susceptible people, such as health care workers, with focus on individual outcomes. We recommend that public officials and governments strongly encourage the use of widespread face masks in public, including the use of appropriate regulation.

Nucleation is a fundamental step in atmospheric new-particle formation. However, laboratory experiments on nucleation have systematically failed to demonstrate sulfuric acid particle formation rates as high as those necessary to account for ambient atmospheric concentrations, and the role of sulfuric acid in atmospheric nucleation has remained a mystery. Here, we report measurements of new particles (with diameters of approximately 1.5 nanometers) observed immediately after their formation at atmospherically relevant sulfuric acid concentrations. Furthermore, we show that correlations between measured nucleation rates and sulfuric acid concentrations suggest that freshly formed particles contain one to two sulfuric acid molecules, a number consistent with assumptions that are based on atmospheric observations. Incorporation of these findings into global models should improve the understanding of the impact of secondary particle formation on climate.

Abstract This paper reports the application of the recently proposed formalism known as generalized population analysis (GPA) as a new means for the quantitative characterization of the aromaticity of various benzenoid rings in polycyclic aromatic hydrocarbons (PAHs). The quantity which we propose as a new measure of aromaticity is the so‐called six‐center bond index. The values of this index characterize the extent of delocalized cyclic bonding in individual benzenoid rings of PAHs and it is shown that the scale of the aromaticity represented by this index closely reflects the intuitive idea according to which the aromaticity of individual rings in PAHs can be gauged by the degree of similarity to benzene itself. In addition, the relation of the newly introduced index of aromaticity to other existing aromaticity measures is discussed. Consistent with the presumed orthogonality of classical and magnetic criteria of aromaticity, the classifications based on these two classes of aromaticity measures were found usually to be opposite. Copyright © 2005 John Wiley & Sons, Ltd.

Abstract. In this paper we describe and summarize the main achievements of the European Aerosol Cloud Climate and Air Quality Interactions project (EUCAARI). EUCAARI started on 1 January 2007 and ended on 31 December 2010 leaving a rich legacy including: (a) a comprehensive database with a year of observations of the physical, chemical and optical properties of aerosol particles over Europe, (b) comprehensive aerosol measurements in four developing countries, (c) a database of airborne measurements of aerosols and clouds over Europe during May 2008, (d) comprehensive modeling tools to study aerosol processes fron nano to global scale and their effects on climate and air quality. In addition a new Pan-European aerosol emissions inventory was developed and evaluated, a new cluster spectrometer was built and tested in the field and several new aerosol parameterizations and computations modules for chemical transport and global climate models were developed and evaluated. These achievements and related studies have substantially improved our understanding and reduced the uncertainties of aerosol radiative forcing and air quality-climate interactions. The EUCAARI results can be utilized in European and global environmental policy to assess the aerosol impacts and the corresponding abatement strategies.

All available numerical data on virial coefficients along with simulation results for the compressibility factors of hard body fluids and their mixtures have been compiled. Practically all relevant theories for these fluids (lattice theories, specific methods for discontinuous potentials, integral and integro-differential theories, expansion and resummation techniques, as well as perturbation and conformal theories) are reviewed and their results are compared with the data. The individual methods are critically assessed and their advantages and limits are discussed.

Abstract Closed formulae for both real and reciprocal space parts of cutoff errors in the Ewald summation method in cubic periodic boundary conditions are derived. Such estimates are useful in tuning parameters in molecular simulations. Errors in both the electrostatic energy and forces are considered. The estimates apply to a disordered configuration of point charges and, with some limitations, also to point-charge molecular models. The accuracy of our estimates is tested and confirmed using simulated configurations of two systems (molten salt and diethylether) under a variety of conditions.

Abstract. Two years of harmonized aerosol number size distribution data from 24 European field monitoring sites have been analysed. The results give a comprehensive overview of the European near surface aerosol particle number concentrations and number size distributions between 30 and 500 nm of dry particle diameter. Spatial and temporal distribution of aerosols in the particle sizes most important for climate applications are presented. We also analyse the annual, weekly and diurnal cycles of the aerosol number concentrations, provide log-normal fitting parameters for median number size distributions, and give guidance notes for data users. Emphasis is placed on the usability of results within the aerosol modelling community. We also show that the aerosol number concentrations of Aitken and accumulation mode particles (with 100 nm dry diameter as a cut-off between modes) are related, although there is significant variation in the ratios of the modal number concentrations. Different aerosol and station types are distinguished from this data and this methodology has potential for further categorization of stations aerosol number size distribution types. The European submicron aerosol was divided into characteristic types: Central European aerosol, characterized by single mode median size distributions, unimodal number concentration histograms and low variability in CCN-sized aerosol number concentrations; Nordic aerosol with low number concentrations, although showing pronounced seasonal variation of especially Aitken mode particles; Mountain sites (altitude over 1000 m a.s.l.) with a strong seasonal cycle in aerosol number concentrations, high variability, and very low median number concentrations. Southern and Western European regions had fewer stations, which decreases the regional coverage of these results. Aerosol number concentrations over the Britain and Ireland had very high variance and there are indications of mixed air masses from several source regions; the Mediterranean aerosol exhibit high seasonality, and a strong accumulation mode in the summer. The greatest concentrations were observed at the Ispra station in Northern Italy with high accumulation mode number concentrations in the winter. The aerosol number concentrations at the Arctic station Zeppelin in Ny-Å lesund in Svalbard have also a strong seasonal cycle, with greater concentrations of accumulation mode particles in winter, and dominating summer Aitken mode indicating more recently formed particles. Observed particles did not show any statistically significant regional work-week or weekday related variation in number concentrations studied. Analysis products are made for open-access to the research community, available in a freely accessible internet site. The results give to the modelling community a reliable, easy-to-use and freely available comparison dataset of aerosol size distributions.

The vapor-liquid equilibria of three recently proposed water models have been computed using Gibbs-Duhem simulations. These models are TIP4P/Ew, TIP4P/2005, and TIP4P/ice and can be considered as modified versions of the TIP4P model. By design TIP4P reproduces the vaporization enthalpy of water at room temperature, whereas TIP4P/Ew and TIP4P/2005 match the temperature of maximum density and TIP4P/ice the melting temperature of water. Recently, the melting point for each of these models has been computed, making it possible for the first time to compute the complete vapor-liquid equilibria curve from the triple point to the critical point. From the coexistence results at high temperature, it is possible to estimate the critical properties of these models. None of them is capable of reproducing accurately the critical pressure or the vapor pressures and densities. Additionally, in the cases of TIP4P and TIP4P/ice the critical temperatures are too low and too high, respectively, compared to the experimental value. However, models accounting for the density maximum of water, such as TIP4P/Ew and TIP4P/2005 provide a better estimate of the critical temperature. In particular, TIP4P/2005 provides a critical temperature just 7 K below the experimental result as well as an extraordinarily good description of the liquid densities from the triple point to the critical point. All TIP4P-like models present a ratio of the triple point temperature to the critical point temperature of about 0.39, compared with the experimental value of 0.42. As is the case for any effective potential neglecting many body forces, TIP4P/2005 fails in describing simultaneously the vapor and the liquid phases of water. However, it can be considered as one of the best effective potentials of water for describing condensed phases, both liquid and solid. In fact, it provides a completely coherent view of the phase diagram of water including fluid-solid, solid-solid, and vapor-liquid equilibria.

The science around the use of masks by the general public to impede COVID-19 transmission is advancing rapidly. Policymakers need guidance on how masks should be used by the general population to combat the COVID-19 pandemic. Here, we synthesize the relevant literature to inform multiple areas: 1) transmission characteristics of COVID-19, 2) filtering characteristics and efficacy of masks, 3) estimated population impacts of widespread community mask use, and 4) sociological considerations for policies concerning mask-wearing. A primary route of transmission of COVID-19 is likely via small respiratory droplets, and is known to be transmissible from presymptomatic and asymptomatic individuals. Reducing disease spread requires two things: first, limit contacts of infected individuals via physical distancing and contact tracing with appropriate quarantine, and second, reduce the transmission probability per contact by wearing masks in public, among other measures. The preponderance of evidence indicates that mask wearing reduces the transmissibility per contact by reducing transmission of infected droplets in both laboratory and clinical contexts. Public mask wearing is most effective at stopping spread of the virus when compliance is high. The decreased transmissibility could substantially reduce the death toll and economic impact while the cost of the intervention is low. Thus we recommend the adoption of public cloth mask wearing, as an effective form of source control, in conjunction with existing hygiene, distancing, and contact tracing strategies. We recommend that public officials and governments strongly encourage the use of widespread face masks in public, including the use of appropriate regulation.

First Page

Abstract Experimental measurements of the reaction of sulfur dioxide and oxygen with limestones have demonstrated substantial influence of the geologic origin of the stone, its porosity and particle size, gaseous concentration of sulfur dioxide, and temperature on the course of reaction and the conversion (that is, the degree of utilization of the limestone content of the particles as a sorbent for sulfur dioxide). A mathematical model including intraparticle transport and chemical reaction within the particles (grain theory) has been developed to simulate this sulfur dioxide sorption reaction.

Ionic liquid polymeric gel membranes containing from 20 wt % to 80 wt % of the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]) in poly(vinylidene fluoride-co-hexafluoropropylene) (p(VDF-HFP)) were prepared by solvent casting from a solution in acetone. The effect of the ionic liquid on the performance and properties of the membranes was discussed and compared with the neat polymer. In the presence of an excess of ionic liquid, p(VDF-HFP) membranes swell in a significant way, especially above 70 °C, becoming completely soluble above 90 °C. DSC analysis shows a gradual decrease of the melting point of the gel and a decrease in the overall melting enthalpy with increasing IL content, whereas the melting enthalpy normalized for the polymer fraction shows an initial drop and then a gradual increase. In the presence of the ionic liquid, the elastic modulus and break strength decrease dramatically, while the maximum deformation first increases due to higher flexibility of the plasticized polymer and then rapidly decreases above 40 wt % of IL as a consequence of the progressive decrease of the number of entanglements. X-ray studies demonstrate a reduction in the overall crystal content. The position of the strongest diffraction peak remains unaltered in all samples, suggesting that only the polymer chains crystallize and that no cocrystallization of ionic liquid and polymer takes place. Preliminary gas permeation measurements show a significant increase of the permeability in the presence of [EMIM][TFSI], especially for carbon dioxide. This suggests a potential application in gas separation membranes, for instance for natural gas treatment or for CO2 sequestration from flue gas.

levels. Europe has a well-established air quality research infrastructure from which yearlong datasets using 21 aerosol chemical speciation monitors (ACSMs) and 1 aerosol mass spectrometer (AMS) were gathered during 2013-2019. It includes 9 non-urban and 13 urban sites. This study developed a state-of-the-art source apportionment protocol to analyse long-term OA mass spectrum data by applying the most advanced source apportionment strategies (i.e., rolling PMF, ME-2, and bootstrap). This harmonised protocol was followed strictly for all 22 datasets, making the source apportionment results more comparable. In addition, it enables quantification of the most common OA components such as hydrocarbon-like OA (HOA), biomass burning OA (BBOA), cooking-like OA (COA), more oxidised-oxygenated OA (MO-OOA), and less oxidised-oxygenated OA (LO-OOA). Other components such as coal combustion OA (CCOA), solid fuel OA (SFOA: mainly mixture of coal and peat combustion), cigarette smoke OA (CSOA), sea salt (mostly inorganic but part of the OA mass spectrum), coffee OA, and ship industry OA could also be separated at a few specific sites. Oxygenated OA (OOA) components make up most of the submicron OA mass (average = 71.1%, range from 43.7 to 100%). Solid fuel combustion-related OA components (i.e., BBOA, CCOA, and SFOA) are still considerable with in total 16.0% yearly contribution to the OA, yet mainly during winter months (21.4%). Overall, this comprehensive protocol works effectively across all sites governed by different sources and generates robust and consistent source apportionment results. Our work presents a comprehensive overview of OA sources in Europe with a unique combination of high time resolution (30-240 min) and long-term data coverage (9-36 months), providing essential information to improve/validate air quality, health impact, and climate models.

A theoretical study of the statistical mechanical description of systems composed of non-spherical convex molecules is made. Thermodynamic functions of one-component and multicomponent systems of particles interacting via the pair potential of the Kihara core type are expressed by integrals over the minimum distance between two interacting convex bodies and three angles characterizing the convex body geometry. The approach is applied to the hard convex body system where the averaged contact correlation function is introduced. Exploiting ideas of the scaled particle theory the approximate expressions for the averaged correlation functions are given in terms of the geometric functionals of hard convex bodies.

This review summarizes principles and current stage of development of fiber-optic chemical sensors (FOCS) and biosensors (FOBS). Fiber optic sensor (FOS) systems use the ability of optical fibers (OF) to guide the light in the spectral range from ultraviolet (UV) (180 nm) up to middle infrared (IR) (10 μm) and modulation of guided light by the parameters of the surrounding environment of the OF core. The introduction of OF in the sensor systems has brought advantages such as measurement in flammable and explosive environments, immunity to electrical noises, miniaturization, geometrical flexibility, measurement of small sample volumes, remote sensing in inaccessible sites or harsh environments and multi-sensing. The review comprises briefly the theory of OF elaborated for sensors, techniques of fabrications and analytical results reached with fiber-optic chemical and biological sensors.

Abstract. Many of the next generation of global climate models will include aerosol schemes which explicitly simulate the microphysical processes that determine the particle size distribution. These models enable aerosol optical properties and cloud condensation nuclei (CCN) concentrations to be determined by fundamental aerosol processes, which should lead to a more physically based simulation of aerosol direct and indirect radiative forcings. This study examines the global variation in particle size distribution simulated by 12 global aerosol microphysics models to quantify model diversity and to identify any common biases against observations. Evaluation against size distribution measurements from a new European network of aerosol supersites shows that the mean model agrees quite well with the observations at many sites on the annual mean, but there are some seasonal biases common to many sites. In particular, at many of these European sites, the accumulation mode number concentration is biased low during winter and Aitken mode concentrations tend to be overestimated in winter and underestimated in summer. At high northern latitudes, the models strongly underpredict Aitken and accumulation particle concentrations compared to the measurements, consistent with previous studies that have highlighted the poor performance of global aerosol models in the Arctic. In the marine boundary layer, the models capture the observed meridional variation in the size distribution, which is dominated by the Aitken mode at high latitudes, with an increasing concentration of accumulation particles with decreasing latitude. Considering vertical profiles, the models reproduce the observed peak in total particle concentrations in the upper troposphere due to new particle formation, although modelled peak concentrations tend to be biased high over Europe. Overall, the multi-model-mean data set simulates the global variation of the particle size distribution with a good degree of skill, suggesting that most of the individual global aerosol microphysics models are performing well, although the large model diversity indicates that some models are in poor agreement with the observations. Further work is required to better constrain size-resolved primary and secondary particle number sources, and an improved understanding of nucleation and growth (e.g. the role of nitrate and secondary organics) will improve the fidelity of simulated particle size distributions.

Almost 500 municipal solid waste incineration plants in the EU, Norway and Switzerland generate about 17.6 Mt/a of incinerator bottom ash (IBA). IBA contains minerals and metals. Metals are mostly separated and sold to the scrap market and minerals are either disposed of in landfills or utilised in the construction sector. Since there is no uniform regulation for IBA utilisation at EU level, countries developed own rules with varying requirements for utilisation. As a result from a cooperation network between European experts an up-to-date overview of documents regulating IBA utilisation is presented. Furthermore, this work highlights the different requirements that have to be considered. Overall, 51 different parameters for the total content and 36 different parameters for the emission by leaching are defined. An analysis of the defined parameter reveals that leaching parameters are significantly more to be considered compared to total content parameters. In order to assess the leaching behaviour nine different leaching tests, including batch tests, up-flow percolation tests and one diffusion test (monolithic materials) are in place. A further discussion of leaching parameters showed that certain countries took over limit values initially defined for landfills for inert waste and adopted them for IBA utilisation. The overall utilisation rate of IBA in construction works is approximately 54 wt%. It is revealed that the rate of utilisation does not necessarily depend on how well regulated IBA utilisation is, but rather seems to be a result of political commitment for IBA recycling and economically interesting circumstances.

Due to increasing demands for microalgal biomass and products originating from microalgae, large-scale production systems are necessary. However, current microalgal production technologies are not cost-effective and are hindered by various bottlenecks, one of which is the harvesting of microalgal biomass. Cell separation is difficult because of the low sedimentation velocity of microalgae, their colloidal character with repelling negative surface charges, and low biomass concentrations in culture broths; therefore, large volumes need to be processed in order to concentrate the cells. Flocculation is considered to be one of the most suitable methods for harvesting microalgal biomass. This article provides an overview of flocculation methods suitable for microalgal harvesting, their mechanisms, advantages and drawbacks. Special attention is paid to the role of surface charge in the mechanism of flocculation. The novelty of the review lies in the interconnection between the context of technological applications and physico-chemical surface phenomena.

The primary liquid alcohols from ethanol to 1-hexanol were studied utilizing the configurational-bias Monte Carlo (MC) simulations of the modeled alcohols (transferable potential for phase equilibria-united atom model) and the small-angle X-ray scattering (SAXS) method. A novel approach for calculating the scattering intensities from the theoretically obtained MC data by utilizing the Debye equation and their further validation with experimental results was introduced. This procedure is important, since the common problem of how to initially separate the intra- and intermolecular contributions to the scattering when comparing the calculated and experimental data was successfully avoided. Nevertheless, the intra- and intermolecular contributions to the scattering were able to be investigated directly from the MC results. The most pretentious task of the procedure was the suppression of the MC box background scattering, which was solved by utilizing the averaging of the scattering intensities over the different box sizes. This method of the scattering intensity calculations enabled us to make a theoretical analog to the well-known small-angle neutron scattering contrast matching experiment that, in our case, nicely revealed the origin of the two alcohol scattering peaks in the SAXS regime of the scattering curves (0.3 A(-1) < q < 3 A(-1)). For the example of butanol, the outer alcohol scattering peaks at approximately 1.40 A(-1) were unambiguously ascribed to the correlations between the alcohol hydrocarbon tails described by the gCH(x)CH(x)(r) pair correlation function. Similarly, the inner alcohol scattering peaks that shift from approximately 0.8 to approximately 0.4 A(-1) with an increasing alkyl chain length of the alcohol molecule are mainly the consequence of the O-O correlations. These findings were tested on pentanol/water mixtures and further applied to the results of the structural investigations on the binary and ternary microemulsion systems of the nonionic surfactant Brij 35 (Tomsic, et al. J. Phys. Chem. B 2004, 108, 7021; Tomsic, et al. J. Colloid Interface Sci. 2006, 294, 194), which were in fact the actual motivation for this present study.

Municipal solid waste incineration (MSWI) is one of the leading technologies for municipal solid waste (MSW) treatment in Europe. Incineration bottom ash (IBA) is the main solid residue from MSWI, and its annual European production is about 20 million tons. The composition of IBA depends on the composition of the incinerated waste; therefore, it may contain significant amounts of ferrous and non-ferrous (NFe) metals as well as glass that can be recovered. Technologies for NFe metals recovery have emerged in IBA treatment since the 1990s and became common practice in many developed countries. Although the principles and used apparatus are nearly the same in all treatment trains, the differences in technological approaches to recovery of valuable components from IBA - with a special focus on NFe metals recovery - are summarized in this paper.