Czech Academy of Sciences, Institute of Plasma Physics

Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.

Plasma-liquid interactions represent a growing interdisciplinary area of research involving plasma science, fluid dynamics, heat and mass transfer, photolysis, multiphase chemistry and aerosol science. This review provides an assessment of the state-of-the-art of this multidisciplinary area and identifies the key research challenges. The developments in diagnostics, modeling and further extensions of cross section and reaction rate databases that are necessary to address these challenges are discussed. The review focusses on non-equilibrium plasmas.

The body of research on (III,Mn)V diluted magnetic semiconductors (DMSs) initiated during the 1990s has concentrated on three major fronts: (i) the microscopic origins and fundamental physics of the ferromagnetism that occurs in these systems, (ii) the materials science of growth and defects, and (iii) the development of spintronic devices with new functionalities. This article reviews the current status of the field, concentrating on the first two, more mature research directions. From the fundamental point of view, (Ga,Mn)As and several other (III,Mn)V DMSs are now regarded as textbook examples of a rare class of robust ferromagnets with dilute magnetic moments coupled by delocalized charge carriers. Both local moments and itinerant holes are provided by Mn, which makes the systems particularly favorable for realizing this unusual ordered state. Advances in growth and postgrowth-treatment techniques have played a central role in the field, often pushing the limits of dilute Mn-moment densities and the uniformity and purity of materials far beyond those allowed by equilibrium thermodynamics. In (III,Mn)V compounds, material quality and magnetic properties are intimately connected. This review focuses on the theoretical understanding of the origins of ferromagnetism and basic structural, magnetic, magnetotransport, and magneto-optical characteristics of simple (III,Mn)V epilayers, with the main emphasis on (Ga,Mn)As. Conclusions are arrived at based on an extensive literature covering results of complementary ab initio and effective Hamiltonian computational techniques, and on comparisons between theory and experiment. The applicability of ferromagnetic semiconductors in microelectronic technologies requires increasing Curie temperatures from the current record of $173\phantom{\rule{0.3em}{0ex}}\mathrm{K}$ in (Ga,Mn)As epilayers to above room temperature. The issue of whether or not this is a realistic expectation for (III,Mn)V DMSs is a central question in the field and motivates many of the analyses presented in this review.

The application of strong electric fields in water and organic liquids has been studied for several years, because of its importance in electrical transmission processes and its practical applications in biology, chemistry, and electrochemistry. More recently, liquid-phase electrical discharge reactors have been investigated, and are being developed, for many environmental applications, including drinking water and wastewater treatment, as well as, potentially, for environmentally benign chemical processes. This paper reviews the current status of research on the application of high-voltage electrical discharges for promoting chemical reactions in the aqueous phase, with particular emphasis on applications to water cleaning.

Formations of transient species and stable chemical products produced at the gas-liquid interface and directly in the liquid by gas discharge plasma in contact with water surface were measured in dependence on the gas atmosphere and solution pH controlled by buffers.The aqueous-phase chemistry and the chemical and biocidal effects of air discharge plasma in the liquid were evaluated using phenol as chemical probe and bacteria E. coli. The nitrated and nitrosylated products of phenol (4-nitrophenol,2-nitrophenol,4-nitrocatechol,4-nitrosophenol) in addition to the hydroxylated products (catechol, hydroquinone, 1,4-benzoquinone, hydroxy-1,4-benzoquinone) evidenced formation of NO2•, NO• and OH• radicals and NO+ ions directly by air plasma at the gas-liquid interface and through post-discharge processes in plasma-activated water (PAW) mediated by peroxynitrite.Kinetic study of post-discharge evolution of H2O2 and NO2- in PAW has demonstrated excellent fit with the pseudo-second-order

We predict that a lateral electrical current in antiferromagnets can induce nonequilibrium Néel-order fields, i.e., fields whose sign alternates between the spin sublattices, which can trigger ultrafast spin-axis reorientation. Based on microscopic transport theory calculations we identify staggered current-induced fields analogous to the intraband and to the intrinsic interband spin-orbit fields previously reported in ferromagnets with a broken inversion-symmetry crystal. To illustrate their rich physics and utility, we consider bulk Mn(2)Au with the two spin sublattices forming inversion partners, and a 2D square-lattice antiferromagnet with broken structural inversion symmetry modeled by a Rashba spin-orbit coupling. We propose an antiferromagnetic memory device with electrical writing and reading.

Abstract The 2022 Roadmap is the next update in the series of Plasma Roadmaps published by Journal of Physics D with the intent to identify important outstanding challenges in the field of low-temperature plasma (LTP) physics and technology. The format of the Roadmap is the same as the previous Roadmaps representing the visions of 41 leading experts representing 21 countries and five continents in the various sub-fields of LTP science and technology. In recognition of the evolution in the field, several new topics have been introduced or given more prominence. These new topics and emphasis highlight increased interests in plasma-enabled additive manufacturing, soft materials, electrification of chemical conversions, plasma propulsion, extreme plasma regimes, plasmas in hypersonics, data-driven plasma science and technology and the contribution of LTP to combat COVID-19. In the last few decades, LTP science and technology has made a tremendously positive impact on our society. It is our hope that this roadmap will help continue this excellent track record over the next 5–10 years.

Pulse positive streamer corona discharges in water solution with a different conductivity have been investigated in reactors with the needle-plate and coaxial electrode geometry. A special composite anode was used in the coaxial geometry. With such an anode hundreds of streamers were generated at each voltage pulse. Production of H, O and OH radicals by the discharge was proved by emission spectroscopy and formation of H2O2 and degradation of phenol was demonstrated by chemical methods. Assuming that the broadening of the line profile was caused by the dynamic Stark effect, plasma with an electron density over 1018 cm-3 was generated during the initial phase of voltage pulse in the both reactors in spite of the very different electrode geometry and wave-forms of voltage pulses. Production of OH radicals was most effective at solution conductivity below .

We report on a comprehensive combined experimental and theoretical study of Curie temperature trends in (Ga,Mn)As ferromagnetic semiconductors. Broad agreement between theoretical expectations and measured data allows us to conclude that ${T}_{c}$ in high-quality metallic samples increases linearly with the number of uncompensated local moments on ${\mathrm{Mn}}_{\mathrm{Ga}}$ acceptors, with no sign of saturation. Room temperature ferromagnetism is expected for a 10% concentration of these local moments. Our magnetotransport and magnetization data are consistent with the picture in which Mn impurities incorporated during growth at interstitial ${\mathrm{Mn}}_{\mathrm{I}}$ positions act as double-donors and compensate neighboring ${\mathrm{Mn}}_{\mathrm{Ga}}$ local moments because of strong near-neighbor ${\mathrm{Mn}}_{\mathrm{Ga}}{\mathrm{Mn}}_{\mathrm{I}}$ antiferromagnetic coupling. These defects can be efficiently removed by post-growth annealing. Our analysis suggests that there is no fundamental obstacle to substitutional ${\mathrm{Mn}}_{\mathrm{Ga}}$ doping in high-quality materials beyond our current maximum level of 6.8%, although this achievement will require further advances in growth condition control. Modest charge compensation does not limit the maximum Curie temperature possible in ferromagnetic semiconductors based on (Ga,Mn)As.

Graphene oxide nanosheets have attracted multidisciplinary attention due to their unique physicochemical properties. Herein, few-layered graphene oxide nanosheets were synthesized from graphite using a modified Hummers method and were characterized by TEM, AFM, Raman spectroscopy, XPS, FTIR spectroscopy, TG-DTA and acid-base titrations. The prepared few-layered graphene oxide nanosheets were used as adsorbents for the preconcentration of U(VI) ions from large volumes of aqueous solutions as a function of pH, ionic strength and temperature. The sorption of U(VI) ions on the graphene oxide nanosheets was strongly dependent on pH and independent of the ionic strength, indicating that the sorption was mainly dominated by inner-sphere surface complexation rather than by outer-sphere surface complexation or ion exchange. The abundant oxygen-containing functional groups on the surfaces of the graphene oxide nanosheets played an important role in U(VI) sorption. The sorption of U(VI) on graphene oxide nanosheets increased with an increase in temperature and the thermodynamic parameters calculated from the temperature-dependent sorption isotherms suggested that the sorption of U(vi) on graphene oxide nanosheets was an endothermic and spontaneous process. The maximum sorption capacities (Q(max)) of U(VI) at pH 5.0 ± 0.1 and T = 20 °C was 97.5 mg g(-1), which was much higher than any of the currently reported nanomaterials. The graphene oxide nanosheets may be suitable materials for the removal and preconcentration of U(VI) ions from large volumes of aqueous solutions, for example, U(VI) polluted wastewater, if they can be synthesized in a cost-effective manner on a large scale in the future.

Chemical and bactericidal effects induced by plasma in water upon electro-spraying through DC-driven positive transient spark discharge in air were investigated. Inactivation of E. coli was determined in dependence on pH (controlled by buffers) and correlated with chemical changes induced in water. Productions of hydrogen peroxide, nitrites, nitrates, peroxynitrites, and pH changes were determined, and the extent of oxidative stress induced in bacteria was evaluated. The degree of inactivation and oxidative damage of bacteria increased with the increasing acidity of the solution. Acidified nitrites interacting with hydrogen peroxide were determined as the most important bactericidal ROS/RNS agents in plasma-treated water. A possible role of peroxynitrites, ozone, and metal nanoparticles is discussed.

dataset

Partial electrical discharges in a water solution as a function of conductivity have been studied experimentally. Using needle-plate electrodes it has been demonstrated that the discharge evolves in two phases. During the first streamer-like phase, the discharge propagated with a velocity of 106 cm/s, while during the second arc-like phase the length of the discharge remained almost constant although the current still increased. Higher solution conductivity resulted in the generation of shorter channels, in larger discharge current, and in a higher plasma electron density. Degradation of phenol by the discharge has also been demonstrated. A special metallic electrode covered by a thin layer of porous ceramic has been developed and used for generation of a multichannel discharge. At comparable solution conductivity the ceramic-coated electrode produced plasma with very similar parameters as the needle-plate electrode configuration. Generation of strong focused shock waves by the multichannel discharge in a highly conductive solution has also been demonstrated.

Progress in the definition of the requirements for edge localized mode (ELM) control and the application of ELM control methods both for high fusion performance DT operation and non-active low-current operation in ITER is described. Evaluation of the power fluxes for low plasma current H-modes in ITER shows that uncontrolled ELMs will not lead to damage to the tungsten (W) divertor target, unlike for high-current H-modes in which divertor damage by uncontrolled ELMs is expected. Despite the lack of divertor damage at lower currents, ELM control is found to be required in ITER under these conditions to prevent an excessive contamination of the plasma by W, which could eventually lead to an increased disruptivity. Modelling with the non-linear MHD code JOREK of the physics processes determining the flow of energy from the confined plasma onto the plasma-facing components during ELMs at the ITER scale shows that the relative contribution of conductive and convective losses is intrinsically linked to the magnitude of the ELM energy loss. Modelling of the triggering of ELMs by pellet injection for DIII-D and ITER has identified the minimum pellet size required to trigger ELMs and, from this, the required fuel throughput for the application of this technique to ITER is evaluated and shown to be compatible with the installed fuelling and tritium re-processing capabilities in ITER. The evaluation of the capabilities of the ELM control coil system in ITER for ELM suppression is carried out (in the vacuum approximation) and found to have a factor of ∼2 margin in terms of coil current to achieve its design criterion, although such a margin could be substantially reduced when plasma shielding effects are taken into account. The consequences for the spatial distribution of the power fluxes at the divertor of ELM control by three-dimensional (3D) fields are evaluated and found to lead to substantial toroidal asymmetries in zones of the divertor target away from the separatrix. Therefore, specifications for the rotation of the 3D perturbation applied for ELM control in order to avoid excessive localized erosion of the ITER divertor target are derived. It is shown that a rotation frequency in excess of 1 Hz for the whole toroidally asymmetric divertor power flux pattern is required (corresponding to n Hz frequency in the variation of currents in the coils, where n is the toroidal symmetry of the perturbation applied) in order to avoid unacceptable thermal cycling of the divertor target for the highest power fluxes and worst toroidal power flux asymmetries expected. The possible use of the in-vessel vertical stability coils for ELM control as a back-up to the main ELM control systems in ITER is described and the feasibility of its application to control ELMs in low plasma current H-modes, foreseen for initial ITER operation, is evaluated and found to be viable for plasma currents up to 5–10 MA depending on modelling assumptions.

Significantly enhanced HER kinetics were achieved by controllably fabricating a stepped MoS₂surface structure which possesses more optimal free energy of H-adsorption.

We have used the Linac Coherent Light Source to generate solid-density aluminum plasmas at temperatures of up to 180 eV. By varying the photon energy of the x rays that both create and probe the plasma, and observing the K-α fluorescence, we can directly measure the position of the K edge of the highly charged ions within the system. The results are found to disagree with the predictions of the extensively used Stewart-Pyatt model, but are consistent with the earlier model of Ecker and Kröll, which predicts significantly greater depression of the ionization potential.

A new scheme of the inverse scattering method is proposed. As an illustration of novel feature of our scheme, the set of fundamental equations has been presented for a generalized nonlinear Schrödinger equation, of which nonlinear terms are composed of a usual cubic nonlinear term and a derivative cubic nonlinear term.

The application of gas discharge plasmas has assumed an important place in many manufacturing processes. Plasma methods contribute significantly to the economic prosperity of industrialized societies. However, plasma is mainly an enabling method and therefore its role remains often hidden. Hence the success of plasma technologies is described for different examples and commercial areas. From these examples and emerging applications, the potential of plasma technologies is discussed. Economic trends are anticipated together with research needs. The community of plasma scientists strongly believes that more exciting advances will continue to foster innovations and discoveries in the first decades of the 21st century, if research and education will be properly funded and sustained by public bodies and industrial investors.

Carbon-stabilized Fe/Fe₃C nanoparticles with excellent adsorption capacity for dyes were fabricated through a facile <italic>in situ</italic> synthetic strategy.

A novel MPL bifunctional material fabricated by an easy and green approach was applied for the simultaneous removal of potentially toxic metals and anionic dyes.