FORTH Institute of Electronic Structure and Laser

Arrays of gold split rings with a 50-nm minimum feature size and with an LC resonance at 200 THz frequency (1.5 microm wavelength) are fabricated. For normal-incidence conditions, they exhibit a pronounced fundamental magnetic mode, arising from a coupling via the electric component of the incident light. For oblique incidence, a coupling via the magnetic component is demonstrated as well. Moreover, we identify a novel higher-order magnetic resonance at around 370 THz (800 nm wavelength) that evolves out of the Mie resonance for oblique incidence. Comparison with theory delivers good agreement and also shows that the structures allow for a negative magnetic permeability.

We demonstrate theoretically that electromagnetically induced transparency can be achieved in metamaterials, in which electromagnetic radiation is interacting resonantly with mesoscopic oscillators rather than with atoms. We describe novel metamaterial designs that can support a full dark resonant state upon interaction with an electromagnetic beam and we present results of its frequency-dependent effective permeability and permittivity. These results, showing a transparency window with extremely low absorption and strong dispersion, are confirmed by accurate simulations of the electromagnetic field propagation in the metamaterial.

We investigate numerically the limits of the resonant magnetic response with a negative effective permeability mu(eff) for single-ring multicut split-ring resonator (SRR) designs up to optical frequencies. We find the breakdown of linear scaling due to the free electron kinetic energy for frequencies above approximately 100 THz. Above the linear scaling regime, the resonance frequency saturates, while the amplitude of the resonant permeability decreases, ultimately ceasing to reach negative value. The highest resonance frequency at which mu(eff) < 0 increases with the number of cuts in the SRR. A LC circuit model provides explanation of the numerical data.

The IR dynamics of effective holographic theories capturing the interplay between charge density and the leading relevant scalar operator at strong coupling are analyzed. Such theories are parameterized by two real exponents (γ, δ) that control the IR dynamics. By studying the thermodynamics, spectra and conductivities of several classes of charged dilatonic black hole solutions that include the charge density back reaction fully, the landscape of such theories in view of condensed matter applications is characterized. Several regions of the (γ, δ) plane can be excluded as the extremal solutions have unacceptable singularities. The classical solutions have generically zero entropy at zero temperature, except when γ = δ where the entropy at extremality is finite. The general scaling of DC resistivity with temperature at low temperature, and AC conductivity at low frequency and temperature across the whole (γ, δ) plane, is found. There is a codimension-one region where the DC resistivity is linear in the temperature. For massive carriers, it is shown that when the scalar operator is not the dilaton, the DC resistivity scales as the heat capacity (and entropy) for planar (3d) systems. Regions are identified where the theory at finite density is a Mott-like insulator at T = 0. We also find that at low enough temperatures the entropy due to the charge carriers is generically larger than at zero charge density.

We study both theoretically and experimentally the transmission properties of a lattice of split ring resonators (SRRs) for different electromagnetic (EM) field polarizations and propagation directions. We find unexpectedly that the incident electric field E couples to the magnetic resonance of the SRR when the EM waves propagate perpendicular to the SRR plane and the incident E is parallel to the gap-bearing sides of the SRR. This is manifested by a dip in the transmission spectrum. A simple analytic model is introduced to explain this interesting behavior.

Real-scale Semantic Web applications, such as Knowledge Portals and E-Marketplaces, require the management of large volumes of metadata, i.e., information describing the available Web content and services. Better knowledge about their meaning, usage, accessibility or quality will considerably facilitate an automated processing of Web resources. The Resource Description Framework (RDF) enables the creation and exchange of metadata as normal Web data. Although voluminous RDF descriptions are already appearing, sufficiently expressive declarative languages for querying both RDF descriptions and schemas are still missing. In this paper, we propose a new RDF query language called RQL. It is a typed functional language (a la OQL) and relies on a formal model for directed labeled graphs permitting the interpretation of superimposed resource descriptions by means of one or more RDF schemas. RQL adapts the functionality of semistructured/XML query languages to the peculiarities of RDF but, foremost, it enables to uniformly query both resource descriptions and schemas. We illustrate the RQL syntax, semantics and typing system by means of a set of example queries and report on the performance of our persistent RDF Store employed by the RQL interpreter.

The results of magnetoconductivity measurements in ${\mathrm{Ga}}_{\mathit{x}}$${\mathrm{In}}_{1\mathrm{\ensuremath{-}}\mathit{x}}$As quantum wells are presented. The observed magnetoconductivity appears due to the quantum interference, which lead to the weak localization effect. It is established that the details of the weak localization are controlled by the spin splitting of electron spectra. A theory is developed that takes into account both linear and cubic in electron wave-vector terms in spin splitting, which arise due to the lack of inversion center in the crystal, as well as the linear terms that appear when the well itself is asymmetric. It is established that, unlike spin-relaxation rate, contributions of different terms into magnetoconductivity are not additive. It is demonstrated that in the interval of electron densities under investigation [(0.98-1.85)\ifmmode\times\else\texttimes\fi{}${10}^{12}$ ${\mathrm{cm}}^{\mathrm{\ensuremath{-}}2}$ ] all three contributions are comparable and have to be taken into account to achieve a good agreement between the theory and experiment. The results obtained from comparison of the experiment and the theory have allowed us to determine what mechanisms dominate the spin-relaxation in quantum wells and to improve the accuracy of determination of spin-splitting parameters in ${\mathit{A}}_{3}$${\mathit{B}}_{5}$ crystals and two-dimensional structures. \textcopyright{} 1996 The American Physical Society.

The IR dynamics of effective holographic theories capturing the interplay between charge density and the leading relevant scalar operator at strong coupling are analyzed. Such theories are parameterized by two real exponents $(\gamma,\delta)$ that control the IR dynamics. By studying the thermodynamics, spectra and conductivities of several classes of charged dilatonic black hole solutions that include the charge density back reaction fully, the landscape of such theories in view of condensed matter applications is characterized. Several regions of the $(\gamma,\delta)$ plane can be excluded as the extremal solutions have unacceptable singularities. The classical solutions have generically zero entropy at zero temperature, except when $\gamma=\delta$ where the entropy at extremality is finite. The general scaling of DC resistivity with temperature at low temperature, and AC conductivity at low frequency and temperature across the whole $(\gamma,\delta)$ plane, is found. There is a codimension-one region where the DC resistivity is linear in the temperature. For massive carriers, it is shown that when the scalar operator is not the dilaton, the DC resistivity scales as the heat capacity (and entropy) for planar (3d) systems. Regions are identified where the theory at finite density is a Mott-like insulator at T=0. We also find that at low enough temperatures the entropy due to the charge carriers is generically larger than at zero charge density.

Abstract The rapid development of additive manufacturing has fueled a revolution in various research fields and industrial applications. Among the myriad of advanced 3D printing techniques, two‐photon polymerization lithography (TPL) uniquely offers a significant advantage in nanoscale print resolution, and has been widely employed in diverse fields, for example, life sciences, materials sciences, mechanics, and microfluidics. More recently, by virtue of the optical transparency of most of the resins used, TPL is finding new applications in optics and photonics, with nanometer to millimeter feature dimensions. It enables the minimization of optical elements and systems, and exploration of light‐matter interactions with new degrees of freedom, never possible before. To review the recent progress in the TPL related optical research, it starts with the fundamentals of TPL and material formulation, then discusses novel fabrication methods, and a wide range of optical applications. These applications notably include diffractive, topological, quantum, and color optics. With a panoramic view of the development, it is concluded with insights and perspectives of the future development of TPL and related potential optical applications.

We analyze the transmission and reflection data obtained through transfer matrix calculations on metamaterials of finite lengths, to determine their effective permittivity epsilon and permeability micro. Our study concerns metamaterial structures composed of periodic arrangements of wires, cut wires, split ring resonators (SRRs), closed SRRs, and both wires and SRRs. We find that the SRRs have a strong electric response, equivalent to that of cut wires, which dominates the behavior of left-handed materials (LHM). Analytical expressions for the effective parameters of the different structures are given, which can be used to explain the transmission characteristics of LHMs. Of particular relevance is the criterion introduced by our studies to identify if an experimental transmission peak is left or right handed.

We use dynamic light scattering and computer simulations to study equilibrium dynamics and dynamic heterogeneity in concentrated suspensions of colloidal hard spheres. Our study covers an unprecedented density range and spans seven decades in structural relaxation time, tau(alpha0, including equilibrium measurements above phi(c), the location of the glass transition deduced from fitting our data to mode-coupling theory. Instead of falling out of equilibrium, the system remains ergodic above phi(c) and enters a new dynamical regime where tau(alpha) increases with a functional form that was not anticipated by previous experiments, while the amplitude of dynamic heterogeneity grows slower than a power law with tau(alpha), as found in molecular glass formers close to the glass transition.

Several classical analogues of electromagnetically induced transparency in metamaterials have been demonstrated. A simple two-resonator model can describe their absorption spectrum qualitatively, but fails to provide information about the scattering properties--e.g., transmission and group delay. Here we develop an alternative model that rigorously includes the coupling of the radiative resonator to the external electromagnetic fields. This radiating two-oscillator model can describe both the absorption spectrum and the scattering parameters quantitatively. The model also predicts metamaterials with a narrow spectral feature in the absorption larger than the background absorption of the radiative element. This classical analogue of electromagnetically induced absorption is shown to occur when both the dissipative loss of the radiative resonator and the coupling strength are small. These predictions are subsequently demonstrated in experiments.

We review basic quantum electrodynamics and quantum optics aspects in microstructures that exhibit a gap in the spectrum of the electromagnetic radiation they support, known as photonic crystals. After a brief sketch of the properties of such materials we discuss the behaviour of few-level atoms or collections thereof with transition frequencies inside and in the vicinity of the gap. The discussion is cast in terms of a unified formalism which facilitates the comparison with standard cavity-atom physics.

Steady and oscillatory rheology was utilized to study the mechanical response of colloidal glasses and gels with particular emphasis in their yielding behaviour. We used a suspension of hard sphere colloidal particles with short-range depletion attractions induced by the addition of non-adsorbing linear polymer. While high volume fraction hard sphere glasses exhibit a single yield point due to cage breaking, attraction dominated glasses show a two-step yielding reflecting bond and cage breaking, respectively. Here we investigated the yielding behaviour of frustrated colloid–polymer systems with equal attraction strength and range, varying the particle volume fraction, φ, spanning the region from an attractive glass (φ = 0.6) to a low volume fraction (φ = 0.1) attractive gel. Yielding throughout this range, probed both by oscillatory and steady shear, is found to remain a two step process until very low φ's. The first yield strain related with in-cage or inter-cluster bond braking remains constant for φ > 0.3 while the second yield strain, attributed to braking of cages or clusters into smaller constituents, increases as volume fraction is decreased due to enhancement of structural inhomogeneities in the gel. Steady shear tests indicated distinct shear rate regimes: At steady state, low and intermediate shear rates create denser or smaller flowing clusters, whereas high rates may lead to complete break-up into independent particles. When the range of attraction was increased, both yield strains increased scaling with the range of attraction and accompanied structural changes. Finally, ageing leads to an overall strengthening of both the gel and the attractive glass accompanied by an enhancement of the second stress overshoot in steady shear, while the attractive glass also becomes more brittle.

We experimentally demonstrate, for the first time, an optically implemented blueshift tunable metamaterial in the terahertz (THz) regime. The design implies two potential resonance states, and the photoconductive semiconductor (silicon) settled in the critical region plays the role of intermediary for switching the resonator from mode 1 to mode 2. The observed tuning range of the fabricated device is as high as 26% (from 0.76 THz to 0.96 THz) through optical control to silicon. The realization of broadband blueshift tunable metamaterial offers opportunities for achieving switchable metamaterials with simultaneous redshift and blueshift tunability and cascade tunable devices. Our experimental approach is compatible with semiconductor technologies and can be used for other applications in the THz regime.

The generation of high harmonics created during the interaction of a 2.5 ps, 1053 nm laser pulse with a solid target has been recorded for intensities up to ${10}^{19}\mathrm{W}{\mathrm{cm}}^{\ensuremath{-}2}$. Harmonic orders up to the 68th at 15.5 nm in first order have been observed with indications up to the 75th at 14.0 nm in second-order diffraction. No differences in harmonic emission between $s$ and $p$ polarization of the laser beam were observed. The power of the 38th high harmonic at 27.7 nm is estimated to be 24 MW.

Origami is the art of folding two-dimensional (2D) materials, such as a flat sheet of paper, into complex and elaborate three-dimensional (3D) objects. This study reports origami-based metamaterials whose electromagnetic responses are dynamically controllable via switching the folding state of Miura-ori split-ring resonators. The deformation of the Miura-ori unit along the third dimension induces net electric and magnetic dipoles of split-ring resonators parallel or anti-parallel to each other, leading to the strong chiral responses. Circular dichroism as high as 0.6 is experimentally observed while the chirality switching is realized by controlling the deformation direction and kinematics. In addition, the relative density of the origami metamaterials can be dramatically reduced to only 2% of that of the unfolded structure. These results open a new avenue toward lightweight, reconfigurable, and deployable metadevices with simultaneously customized electromagnetic and mechanical properties.

Views Icon Views Article contents Figures & tables Video Audio Supplementary Data Peer Review Share Icon Share Twitter Facebook Reddit LinkedIn Tools Icon Tools Reprints and Permissions Cite Icon Cite Search Site Citation K. N. Pham, G. Petekidis, D. Vlassopoulos, S. U. Egelhaaf, W. C. K. Poon, P. N. Pusey; Yielding behavior of repulsion- and attraction-dominated colloidal glasses. Journal of Rheology 1 March 2008; 52 (2): 649–676. https://doi.org/10.1122/1.2838255 Download citation file: Ris (Zotero) Reference Manager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex toolbar search Search Dropdown Menu toolbar search search input Search input auto suggest filter your search All ContentThe Society of RheologyJournal of Rheology Search Advanced Search |Citation Search

The ability to predict, anticipate and reason about future outcomes is a key component of intelligent decision-making systems. In light of the success of deep learning in computer vision, deep-learning-based video prediction emerged as a promising research direction. Defined as a self-supervised learning task, video prediction represents a suitable framework for representation learning, as it demonstrated potential capabilities for extracting meaningful representations of the underlying patterns in natural videos. Motivated by the increasing interest in this task, we provide a review on the deep learning methods for prediction in video sequences. We first define the video prediction fundamentals, as well as mandatory background concepts and the most used datasets. Next, we carefully analyze existing video prediction models organized according to a proposed taxonomy, highlighting their contributions and their significance in the field. The summary of the datasets and methods is accompanied with experimental results that facilitate the assessment of the state of the art on a quantitative basis. The paper is summarized by drawing some general conclusions, identifying open research challenges and by pointing out future research directions.

We study the frequency dependence of the effective electromagnetic parameters of left-handed and related metamaterials of the split ring resonator and wire type. We show that the reduced translational symmetry (periodic structure) inherent to these metamaterials influences their effective electromagnetic response. To anticipate this periodicity, we formulate a periodic effective medium model which enables us to distinguish the resonant behavior of electromagnetic parameters from effects of the periodicity of the structure. We use this model for the analysis of numerical data for the transmission and reflection of periodic arrays of split ring resonators, thin metallic wires, cut wires, as well as the left-handed structures. The present method enables us to identify the origin of the previously observed resonance-antiresonance coupling as well as the occurrence of negative imaginary parts in the effective permittivities and permeabilities of those materials. Our analysis shows that the periodicity of the structure can be neglected only for the wavelength of the electromagnetic wave larger than 30 space periods of the investigated structure.