Inha University

The Internet of Things (IoT) makes smart objects the ultimate building blocks in the development of cyber-physical smart pervasive frameworks. The IoT has a variety of application domains, including health care. The IoT revolution is redesigning modern health care with promising technological, economic, and social prospects. This paper surveys advances in IoT-based health care technologies and reviews the state-of-the-art network architectures/platforms, applications, and industrial trends in IoT-based health care solutions. In addition, this paper analyzes distinct IoT security and privacy features, including security requirements, threat models, and attack taxonomies from the health care perspective. Further, this paper proposes an intelligent collaborative security model to minimize security risk; discusses how different innovations such as big data, ambient intelligence, and wearables can be leveraged in a health care context; addresses various IoT and eHealth policies and regulations across the world to determine how they can facilitate economies and societies in terms of sustainable development; and provides some avenues for future research on IoT-based health care based on a set of open issues and challenges.

Non-orthogonal multiple access (NOMA) is one of the promising radio access techniques for performance enhancement in next-generation cellular communications. Compared to orthogonal frequency division multiple access, which is a well-known high-capacity orthogonal multiple access technique, NOMA offers a set of desirable benefits, including greater spectrum efficiency. There are different types of NOMA techniques, including power-domain and code-domain. This paper primarily focuses on power-domain NOMA that utilizes superposition coding at the transmitter and successive interference cancellation at the receiver. Various researchers have demonstrated that NOMA can be used effectively to meet both network-level and user-experienced data rate requirements of fifth-generation (5G) technologies. From that perspective, this paper comprehensively surveys the recent progress of NOMA in 5G systems, reviewing the state-of-the-art capacity analysis, power allocation strategies, user fairness, and user-pairing schemes in NOMA. In addition, this paper discusses how NOMA performs when it is integrated with various proven wireless communications techniques, such as cooperative communications, multiple-input multiple-output, beamforming, space–time coding, and network coding among others. Furthermore, this paper discusses several important issues on NOMA implementation and provides some avenues for future research.

In seeking greater sustainability in water resources management, wastewater is now being considered more as a resource than as a waste-a resource for water, for plant nutrients, and for energy. Energy, the primary focus of this article, can be obtained from wastewater's organic as well as from its thermal content. Also, using wastewater's nitrogen and P nutrients for plant fertilization, rather than wasting them, helps offset the high energy cost of producing synthetic fertilizers. Microbial fuel cells offer potential for direct biological conversion of wastewater's organic materials into electricity, although significant improvements are needed for this process to be competitive with anaerobic biological conversion of wastewater organics into biogas, a renewable fuel used in electricity generation. Newer membrane processes coupled with complete anaerobic treatment of wastewater offer the potential for wastewater treatment to become a net generator of energy, rather than the large energy consumer that it is today.

Graphene is a distinct two-dimensional material that offers a wide range of opportunities for membrane applications because of ultimate thinness, flexibility, chemical stability, and mechanical strength. We demonstrate that few- and several-layered graphene and graphene oxide (GO) sheets can be engineered to exhibit the desired gas separation characteristics. Selective gas diffusion can be achieved by controlling gas flow channels and pores via different stacking methods. For layered (3- to 10-nanometer) GO membranes, tunable gas transport behavior was strongly dependent on the degree of interlocking within the GO stacking structure. High carbon dioxide/nitrogen selectivity was achieved by well-interlocked GO membranes in high relative humidity, which is most suitable for postcombustion carbon dioxide capture processes, including a humidified feed stream.

Ionic liquids (ILs) are normally defined as compounds completely composed of ions with melting point below 100 °C. The first IL (ethylammonium nitrate) was reported by Paul Walden in 1914, who at that time never realized that ILs would become a major scientific area after almost one century. Actually, ILs as innovative fluids have received wide attention only during the past two decades. The number of SCI papers published on ILs has exponentially increased from a few in 1996 to >5000 in 2016, exceeding the annual growth rates of other popular scientific areas. This indicates that more and more researchers are engaged in studying this exciting area, with the outcomes being plentiful. A multidisciplinary study on ILs is emerging, including chemistry, materials science, chemical engineering, and environmental science. More specifically, some important fundamental viewpoints are now different from the original concepts, as insights into the nature of ILs become deeper. For example, the physicochemical properties of ILs are now recognized as ranging broadly from the oft quoted “nonvolatile, non-flammable, and air and water stable” to those that are distinctly volatile, flammable, and unstable. This is attributed to numerous combinations of cations and anions that meet the definition of ILs, leading to a diverse suite of behaviors. Regardless, ILs remain more desirable than conventional volatile solvents and/or catalysts in many physical and chemical processes, often exhibiting “green” and “designer” properties to a useful degree.

capture as well as utilization were systematically discussed and compared. With our great effort, this review would be of significant importance for academic researchers for obtaining an overall understanding of the current developments and future trends of CCU. This work is bound to benefit researchers in fields relating to CCU and facilitate the progress of significant breakthroughs in both fundamental research and commercial applications to deliver perspective views for future scientific and industrial advances in CCU.

Deep-fat frying produces desirable or undesirable flavor compounds and changes the flavor stability and quality of the oil by hydrolysis, oxidation, and polymerization. Tocopherols, essential amino acids, and fatty acids in foods are degraded during deep-fat frying. The reactions in deep-fat frying depend on factors such as replenishment of fresh oil, frying conditions, original quality of frying oil, food materials, type of fryer, antioxidants, and oxygen concentration. High frying temperature, the number of fryings, the contents of free fatty acids, polyvalent metals, and unsaturated fatty acids of oil decrease the oxidative stability and flavor quality of oil. Antioxidant decreases the frying oil oxidation, but the effectiveness of antioxidant decreases with high frying temperature. Lignan compounds in sesame oil are effective antioxidants in deep-fat frying.

A coronavirus (HCoV-19) has caused the novel coronavirus disease (COVID-19) outbreak in Wuhan, China. Preventing and reversing the cytokine storm may be the key to save the patients with severe COVID-19 pneumonia. Mesenchymal stem cells (MSCs) have been shown to possess a comprehensive powerful immunomodulatory function. This study aims to investigate whether MSC transplantation improves the outcome of 7 enrolled patients with COVID-19 pneumonia in Beijing YouAn Hospital, China, from Jan 23, 2020 to Feb 16, 2020. The clinical outcomes, as well as changes of inflammatory and immune function levels and adverse effects of 7 enrolled patients were assessed for 14 days after MSC injection. MSCs could cure or significantly improve the functional outcomes of seven patients without observed adverse effects. The pulmonary function and symptoms of these seven patients were significantly improved in 2 days after MSC transplantation. Among them, two common and one severe patient were recovered and discharged in 10 days after treatment. After treatment, the peripheral lymphocytes were increased, the C-reactive protein decreased, and the overactivated cytokine-secreting immune cells CXCR3+CD4+ T cells, CXCR3+CD8+ T cells, and CXCR3+ NK cells disappeared in 3-6 days. In addition, a group of CD14+CD11c+CD11b^mid regulatory DC cell population dramatically increased. Meanwhile, the level of TNF-α was significantly decreased, while IL-10 increased in MSC treatment group compared to the placebo control group. Furthermore, the gene expression profile showed MSCs were ACE2^- and TMPRSS2^- which indicated MSCs are free from COVID-19 infection. Thus, the intravenous transplantation of MSCs was safe and effective for treatment in patients with COVID-19 pneumonia, especially for the patients in critically severe condition.

Abstract Dielectric capacitors, which store electrical energy in the form of an electrostatic field via dielectric polarization, are used in pulsed power electronics due to their high power density and ultrashort discharge time. In pursuit of developing high‐performance dielectric capacitors, special attention has been given to the improvement of their energy density and storage efficiency, which would make them useful for an even wider variety of applications. Among the different dielectric materials studied so far, including polymers, glasses, and both bulk and film‐based ceramics, dielectric ceramic films, which are of particular interest for miniature power electronics and mobile platforms, have demonstrated the greatest energy storage performances. In this regard, several interesting approaches involving physical, chemical, and microstructural modifications of the dielectric ceramic films are adopted. In addition to a brief discussion of the polymers, glasses, and ceramics used in dielectric capacitors and key parameters related to their energy storage performance, this review article presents a comprehensive overview of the numerous efforts made toward enhancing the energy storage properties of linear dielectric, paraelectric, ferroelectric, relaxor ferroelectric, and anti‐ferroelectric ceramic films for their applications in pulsed power capacitors.

This study examines the current state of artificial intelligence (AI)-based technology applications and their impact on the healthcare industry. In addition to a thorough review of the literature, this study analyzed several real-world examples of AI applications in healthcare. The results indicate that major hospitals are, at present, using AI-enabled systems to augment medical staff in patient diagnosis and treatment activities for a wide range of diseases. In addition, AI systems are making an impact on improving the efficiency of nursing and managerial activities of hospitals. While AI is being embraced positively by healthcare providers, its applications provide both the utopian perspective (new opportunities) and the dystopian view (challenges to overcome). We discuss the details of those opportunities and challenges to provide a balanced view of the value of AI applications in healthcare. It is clear that rapid advances of AI and related technologies will help care providers create new value for their patients and improve the efficiency of their operational processes. Nevertheless, effective applications of AI will require effective planning and strategies to transform the entire care service and operations to reap the benefits of what technologies offer.

Control of silk fibroin concentration in aqueous solutions via osmotic stress was studied to assess relationships to gel formation and structural, morphological, and functional (mechanical) changes associated with this process. Environmental factors potentially important in the in vivo processing of aqueous silk fibroin were also studied to determine their contributions to this process. Gelation of silk fibroin aqueous solutions was affected by temperature, Ca(2+), pH, and poly(ethylene oxide) (PEO). Gelation time decreased with increase in protein concentration, decrease in pH, increase in temperature, addition of Ca(2+), and addition of PEO. No change of gelation time was observed with the addition of K(+). Upon gelation, a random coil structure of the silk fibroin was transformed into a beta-sheet structure. Hydrogels with fibroin concentrations >4 wt % exhibited network and spongelike structures on the basis of scanning electron microscopy. Pore sizes of the freeze-dried hydrogels were smaller as the silk fibroin concentration or gelation temperature was increased. Freeze-dried hydrogels formed in the presence of Ca(2+) exhibited larger pores as the concentration of this ion was increased. Mechanical compressive strength and modulus of the hydrogels increased with increase in protein concentration and gelation temperature. The results of these studies provide insight into the sol-gel transitions that silk fibroin undergoes in glands during aqueous processing while also providing important insight in the in vitro processing of these proteins into useful new materials.

Abstract The antioxidant activities of 18 typical phenolic acids were investigated using 2, 2′-diphenyl-1-picrylhydrazyl (DPPH) and ferric ion reducing antioxidant power (FRAP) assays. Five thermodynamic parameters involving hydrogen atom transfer (HAT), single-electron transfer followed by proton transfer (SET-PT), and sequential proton-loss electron transfer (SPLET) mechanisms were calculated using density functional theory with the B3LYP/UB3LYP functional and 6–311++G (d, p) basis set and compared in the phenolic acids. Based on the same substituents on the benzene ring, -CH 2 COOH and -CH = CHCOOH can enhance the antioxidant activities of phenolic acids, compared with -COOH. Methoxyl (-OCH 3 ) and phenolic hydroxyl (-OH) groups can also promote the antioxidant activities of phenolic acids. These results relate to the O-H bond dissociation enthalpy of the phenolic hydroxyl group in phenolic acids and the values of proton affinity and electron transfer enthalpy (ETE) involved in the electron donation ability of functional groups. In addition, we speculated that HAT, SET-PT, and SPLET mechanisms may occur in the DPPH reaction system. Whereas SPLET was the main reaction mechanism in the FRAP system, because, except for 4-hydroxyphenyl acid, the ETE values of the phenolic acids in water were consistent with the experimental results.

Biomineralization is a naturally occurring process in living organisms. In this review, we discuss microbially induced calcium carbonate precipitation (MICP) in detail. In the MICP process, urease plays a major role in urea hydrolysis by a wide variety of microorganisms capable of producing high levels of urease. We also elaborate on the different polymorphs and the role of calcium in the formation of calcite crystal structures using various calcium sources. Additionally, the environmental factors affecting the production of urease and carbonate precipitation are discussed. This MICP is a promising, eco-friendly alternative approach to conventional and current remediation technologies to solve environmental problems in multidisciplinary fields. Multiple applications of MICP such as removal of heavy metals and radionuclides, improve the quality of construction materials and sequestration of atmospheric CO2 are discussed. In addition, we discuss other applications such as removal of calcium ions, PCBs and use of filler in rubber and plastics and fluorescent particles in stationary ink and stationary markers. MICP technology has become an efficient aspect of multidisciplinary fields. This report not only highlights the major strengths of MICP, but also discusses the limitations to application of this technology on a commercial scale.

Post-stroke dementia (PSD) or post-stroke cognitive impairment (PSCI) may affect up to one third of stroke survivors. Various definitions of PSCI and PSD have been described. We propose PSD as a label for any dementia following stroke in temporal relation. Various tools are available to screen and assess cognition, with few PSD-specific instruments. Choice will depend on purpose of assessment, with differing instruments needed for brief screening (e.g., Montreal Cognitive Assessment) or diagnostic formulation (e.g., NINDS VCI battery). A comprehensive evaluation should include assessment of pre-stroke cognition (e.g., using Informant Questionnaire for Cognitive Decline in the Elderly), mood (e.g., using Hospital Anxiety and Depression Scale), and functional consequences of cognitive impairments (e.g., using modified Rankin Scale). A large number of biomarkers for PSD, including indicators for genetic polymorphisms, biomarkers in the cerebrospinal fluid and in the serum, inflammatory mediators, and peripheral microRNA profiles have been proposed. Currently, no specific biomarkers have been proven to robustly discriminate vulnerable patients ('at risk brains') from those with better prognosis or to discriminate Alzheimer's disease dementia from PSD. Further, neuroimaging is an important diagnostic tool in PSD. The role of computerized tomography is limited to demonstrating type and location of the underlying primary lesion and indicating atrophy and severe white matter changes. Magnetic resonance imaging is the key neuroimaging modality and has high sensitivity and specificity for detecting pathological changes, including small vessel disease. Advanced multi-modal imaging includes diffusion tensor imaging for fiber tracking, by which changes in networks can be detected. Quantitative imaging of cerebral blood flow and metabolism by positron emission tomography can differentiate between vascular dementia and degenerative dementia and show the interaction between vascular and metabolic changes. Additionally, inflammatory changes after ischemia in the brain can be detected, which may play a role together with amyloid deposition in the development of PSD. Prevention of PSD can be achieved by prevention of stroke. As treatment strategies to inhibit the development and mitigate the course of PSD, lowering of blood pressure, statins, neuroprotective drugs, and anti-inflammatory agents have all been studied without convincing evidence of efficacy. Lifestyle interventions, physical activity, and cognitive training have been recently tested, but large controlled trials are still missing.

Fibroblast growth factors (FGFs) that signal through FGF receptors (FGFRs) regulate a broad spectrum of biological functions, including cellular proliferation, survival, migration, and differentiation. The FGF signal pathways are the RAS/MAP kinase pathway, PI3 kinase/AKT pathway, and PLCγ pathway, among which the RAS/MAP kinase pathway is known to be predominant. Several studies have recently implicated the in vitro biological functions of FGFs for tissue regeneration. However, to obtain optimal outcomes in vivo, it is important to enhance the half-life of FGFs and their biological stability. Future applications of FGFs are expected when the biological functions of FGFs are potentiated through the appropriate use of delivery systems and scaffolds. This review will introduce the biology and cellular functions of FGFs and deal with the biomaterials based delivery systems and their current applications for the regeneration of tissues, including skin, blood vessel, muscle, adipose, tendon/ligament, cartilage, bone, tooth, and nerve tissues.

The past 10 years has witnessed a renewed interest in cellulose research and application, sparked mostly by technological interests in renewable raw materials and more environmentally friendly and sustainable resources. In this paper, we further expand the current knowledge in cellulose applications and technologies by reporting our discovery of cellulose as a smart material that can be used for biomimetic sensor/actuator devices and micro-electromechanical systems. This smart cellulose is termed electroactive paper (EAPap). It can produce a large bending displacement with low actuation voltage and low power consumption. The actuation phenomenon and its characteristics are illustrated in this paper. Because cellulose EAPap is ultra-lightweight, inexpensive, and biodegradable, it is advantageous for many applications such as micro-insect robots, micro-flying objects, micro-electromechanical systems, biosensors, and flexible electrical displays.

Abstract At sufficiently high temperature and energy density, nuclear matter undergoes a transition to a phase in which quarks and gluons are not confined: the quark–gluon plasma (QGP) 1 . Such an exotic state of strongly interacting quantum chromodynamics matter is produced in the laboratory in heavy nuclei high-energy collisions, where an enhanced production of strange hadrons is observed 2,3,4,5,6 . Strangeness enhancement, originally proposed as a signature of QGP formation in nuclear collisions 7 , is more pronounced for multi-strange baryons. Several effects typical of heavy-ion phenomenology have been observed in high-multiplicity proton–proton (pp) collisions 8,9 , but the enhanced production of multi-strange particles has not been reported so far. Here we present the first observation of strangeness enhancement in high-multiplicity proton–proton collisions. We find that the integrated yields of strange and multi-strange particles, relative to pions, increases significantly with the event charged-particle multiplicity. The measurements are in remarkable agreement with the p–Pb collision results 10,11 , indicating that the phenomenon is related to the final system created in the collision. In high-multiplicity events strangeness production reaches values similar to those observed in Pb–Pb collisions, where a QGP is formed.

Efficient quasi-2D-structure perovskite light-emitting diodes (4.90 cd A−1) are demonstrated by mixing a 3D-structured perovskite material (methyl ammonium lead bromide) and a 2D-structured perovskite material (phenylethyl ammonium lead bromide), which can be ascribed to better film uniformity, enhanced exciton confinement, and reduced trap density. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

The use of wireless sensor networks (WSN) in healthcare applications is growing in a fast pace. Numerous applications such as heart rate monitor, blood pressure monitor and endoscopic capsule are already in use. To address the growing use of sensor technology in this area, a new field known as wireless body area networks (WBAN or simply BAN) has emerged. As most devices and their applications are wireless in nature, security and privacy concerns are among major areas of concern. Due to direct involvement of humans also increases the sensitivity. Whether the data gathered from patients or individuals are obtained with the consent of the person or without it due to the need by the system, misuse or privacy concerns may restrict people from taking advantage of the full benefits from the system. People may not see these devices safe for daily use. There may also possibility of serious social unrest due to the fear that such devices may be used for monitoring and tracking individuals by government agencies or other private organizations. In this paper we discuss these issues and analyze in detail the problems and their possible measures.

Abstract Silk fibers have outstanding mechanical properties. These fibers are insoluble in organic solvents and water, are biocompatible, and exhibit slow biodegradation in vitro and in vivo due to the hydrophobic nature of the protein and the presence of a high content of β‐sheet structure. Regenerated silk fibroin can be processed into a variety of materials normally stabilized by the induction of β‐sheet formation through the use of solvents or by physical stretching. To extend the biomaterial utility of silk proteins, options to form water‐stable silk‐based materials with reduced β‐sheet formation would be desirable. To address this need for more rapidly degradable silk biomaterials, we report the preparation of water‐stable films from regenerated silk fibroin solutions, with reduced β‐sheet content. The keys to this process are the preparation of concentrated (8 % by weight) aqueous solutions of fibroin and a subsequent water‐based annealing procedure. These new materials degrade more rapidly due to the reduced β‐sheet content, as determined in vitro via enzymatic hydrolysis, yet support human adult stem‐cell expansion in vitro in a similar or improved fashion to the crystallized proteins in film form. These new silk‐based materials extend the range of biomaterial properties that can be generated from this unique family of proteins.