Institut Català de Nanociència i Nanotecnologia

We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

The hybrid approach allows for a reinforcing combination of properties of dissimilar components in synergic combinations. From hybrid materials to hybrid devices the approach offers opportunities to tackle much needed improvements in the performance of energy storage devices. This paper reviews the different approaches and scales of hybrids, materials, electrodes and devices striving to advance along the diagonal of Ragone plots, providing enhanced energy and power densities by combining battery and supercapacitor materials and storage mechanisms. Furthermore, some theoretical aspects are considered regarding the possible hybrid combinations and tactics for the fabrication of optimized final devices. All of it aiming at enhancing the electrochemical performance of energy storage systems.

Monodisperse citrate-stabilized gold nanoparticles with a uniform quasi-spherical shape of up to ∼200 nm and a narrow size distribution were synthesized following a kinetically controlled seeded growth strategy via the reduction of HAuCl(4) by sodium citrate. The inhibition of any secondary nucleation during homogeneous growth was controlled by adjusting the reaction conditions: temperature, gold precursor to seed particle concentration, and pH. This method presents improved results regarding the traditional Frens method in several aspects: (i) it produces particles of higher monodispersity; (ii) it allows better control of the gold nanoparticle size and size distribution; and (iii) it leads to higher concentrations. Gold nanoparticles synthesized following this method can be further functionalized with a wide variety of molecules, hence this method appears to be a promising candidate for application in the fields of biomedicine, photonics, and electronics, among others.

Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field.

Abstract Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis.

Inorganic colloidal nanoparticles are very small, nanoscale objects with inorganic cores that are dispersed in a solvent. Depending on the material they consist of, nanoparticles can possess a number of different properties such as high electron density and strong optical absorption (e.g. metal particles, in particular Au), photoluminescence in the form of fluorescence (semiconductor quantum dots, e.g. CdSe or CdTe) or phosphorescence (doped oxide materials, e.g. Y(2)O(3)), or magnetic moment (e.g. iron oxide or cobalt nanoparticles). Prerequisite for every possible application is the proper surface functionalization of such nanoparticles, which determines their interaction with the environment. These interactions ultimately affect the colloidal stability of the particles, and may yield to a controlled assembly or to the delivery of nanoparticles to a target, e.g. by appropriate functional molecules on the particle surface. This work aims to review different strategies of surface modification and functionalization of inorganic colloidal nanoparticles with a special focus on the material systems gold and semiconductor nanoparticles, such as CdSe/ZnS. However, the discussed strategies are often of general nature and apply in the same way to nanoparticles of other materials.

ADVERTISEMENT RETURN TO ISSUEPREVReviewNEXTRecent Trends in Macro-, Micro-, and Nanomaterial-Based Tools and Strategies for Heavy-Metal DetectionGemma Aragay†‡, Josefina Pons‡, and Arben Merkoçi*†§View Author Information† Nanobioelectronics & Biosensors Group, Institut Català de Nanotecnologia (CIN2, ICN-CSIC), 08193, Bellaterra, Barcelona, Spain‡ Departament of Chemistry, Universitat Autònoma de Barcelona, 08193, Bellaterra, Barcelona, Spain§ ICREA, Barcelona, SpainFax: (+)34935868020. E-mail: [email protected]. Web site: http://nanocat.org/dataeng/recerca/biopriv/bio_home.php.Cite this: Chem. Rev. 2011, 111, 5, 3433–3458Publication Date (Web):March 11, 2011Publication History Received8 November 2010Published online11 March 2011Published inissue 11 May 2011https://pubs.acs.org/doi/10.1021/cr100383rhttps://doi.org/10.1021/cr100383rreview-articleACS PublicationsCopyright © 2011 American Chemical SocietyRequest reuse permissionsArticle Views22375Altmetric-Citations1177LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Fluorescence,Ions,Mercury,Metal nanoparticles,Metals Get e-Alerts

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic.

In this work, we explore the formation of the protein corona after exposure of metallic Au nanoparticles (NPs), with sizes ranging from 4 to 40 nm, to cell culture media containing 10% of fetal bovine serum. Under in vitro cell culture conditions, zeta potential measurements, UV−vis spectroscopy, dynamic light scattering and transmission electron microscope analysis were used to monitor the time evolution of the inorganic NP−protein corona formation and to characterize the stability of the NPs and their surface state at every stage of the experiment. As expected, the red-shift of the surface plasmon resonance peak, as well as the drop of surface charge and the increase of the hydrodynamic diameter indicated the conjugation of proteins to NPs. Remarkably, an evolution from a loosely attached toward an irreversible attached protein corona over time was observed. Mass spectrometry of the digested protein corona revealed albumin as the most abundant component which suggests an improved biocompatibility.

The literature on open-framework materials has shown numerous examples of porous solids with additional structural, chemical, or physical properties. These materials show promise for applications ranging from sensing, catalysis and separation to multifunctional materials. This critical review provides an up-to-date survey to this new generation of multifunctional open-framework solids. For this, a detailed revision of the different examples so far reported will be presented, classified into five different sections: magnetic, chiral, conducting, optical, and labile open-frameworks for sensing applications. (413 references.)

Flexoelectricity—the coupling between polarization and strain gradients—is a universal effect allowed by symmetry in all materials. Following its discovery several decades ago, studies of flexoelectricity in solids have been scarce due to the seemingly small magnitude of this effect in bulk samples. The development of nanoscale technologies, however, has renewed the interest in flexoelectricity, as the large strain gradients often present at the nanoscale can lead to strong flexoelectric effects. Here we review the fundamentals of the flexoelectric effect in solids, discuss its presence in many nanoscale systems, and look at potential applications of this electromechanical phenomenon. The review also emphasizes the many open questions and unresolved issues in this developing field.

The potential commercial applications for metal organic frameworks (MOFs) are tantalizing. To address the opportunity, many novel approaches for their synthesis have been developed recently. These strategies present a critical step towards harnessing the myriad of potential applications of MOFs by enabling larger scale production and hence real-world applications. This review provides an up-to-date survey ( references) of the most promising novel synthetic routes, i.e., electrochemical, microwave, mechanochemical, spray drying and flow chemistry synthesis. Additionally, the essential topic of downstream processes, especially for large scale synthesis, is critically reviewed. Lastly we present the current state of MOF commercialization with direct feedback from commercial players.

Disposable sensors are low-cost and easy-to-use sensing devices intended for short-term or rapid single-point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource-limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo- and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low-cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities.

Highly monodisperse sodium citrate-coated spherical silver nanoparticles (Ag NPs) with controlled sizes ranging from 10 to 200 nm have been synthesized by following a kinetically controlled seeded-growth approach via the reduction of silver nitrate by the combination of two chemical reducing agents: sodium citrate and tannic acid. The use of traces of tannic acid is fundamental in the synthesis of silver seeds, with an unprecedented (nanometric resolution) narrow size distribution that becomes even narrower, by size focusing, during the growth process. The homogeneous growth of Ag seeds is kinetically controlled by adjusting reaction parameters: concentrations of reducing agents, temperature, silver precursor to seed ratio, and pH. This method produces long-term stable aqueous colloidal dispersions of Ag NPs with narrow size distributions, relatively high concentrations (up to 6 × 1012 NPs/mL), and, more important, readily accessible surfaces. This was proved by studying the catalytic properties of as-synthesized Ag NPs using the reduction of Rhodamine B (RhB) by sodium borohydride as a model reaction system. As a result, we show the ability of citrate-stabilized Ag NPs to act as very efficient catalysts for the degradation of RhB while the coating with a polyvinylpyrrolidone (PVP) layer dramatically decreased the reaction rate.

Recent developments in and around the SIESTA method of first-principles simulation of condensed matter are described and reviewed, with emphasis on (i) the applicability of the method for large and varied systems, (ii) efficient basis sets for the standards of accuracy of density-functional methods, (iii) new implementations, and (iv) extensions beyond ground-state calculations.

The adhesion of some marine organisms to almost any kind of surface in wet conditions has aroused increasing interest in recent decades. Numerous fundamental studies have been performed to understand the scientific basis of this behaviour, with catechols having been found to play a key role. Several novel bio-inspired adhesives and coatings with value-added performances have been developed by taking advantage of the knowledge gained from these studies. To date there has been no detailed overview focusing exclusively on the complex mode of action of these materials. The aim of this Review is to present recent investigations that elucidate the origin of the strong and versatile adsorption capacities of the catechol moiety and the effects of extrinsic factors that play important roles in the overall adhesion process, such as pH value, solvent, and the presence of metal ions. The aim is to detail the chemistry behind the astonishing properties of natural and synthetic catechol-based adhesive materials.

Ferroelectric materials are characterized by a permanent electric dipole that can be reversed through the application of an external voltage, but a strong intrinsic coupling between polarization and deformation also causes all ferroelectrics to be piezoelectric, leading to applications in sensors and high-displacement actuators. A less explored property is flexoelectricity, the coupling between polarization and a strain gradient. We demonstrate that the stress gradient generated by the tip of an atomic force microscope can mechanically switch the polarization in the nanoscale volume of a ferroelectric film. Pure mechanical force can therefore be used as a dynamic tool for polarization control and may enable applications in which memory bits are written mechanically and read electrically.

Catechols are found in nature taking part in a remarkably broad scope of biochemical processes and functions. Though not exclusively, such versatility may be traced back to several properties uniquely found together in the o-dihydroxyaryl chemical function; namely, its ability to establish reversible equilibria at moderate redox potentials and pHs and to irreversibly cross-link through complex oxidation mechanisms; its excellent chelating properties, greatly exemplified by, but by no means exclusive, to the binding of Fe(3+); and the diverse modes of interaction of the vicinal hydroxyl groups with all kinds of surfaces of remarkably different chemical and physical nature. Thanks to this diversity, catechols can be found either as simple molecular systems, forming part of supramolacular structures, coordinated to different metal ions or as macromolecules mostly arising from polymerization mechanisms through covalent bonds. Such versatility has allowed catechols to participate in several natural processes and functions that range from the adhesive properties of marine organisms to the storage of some transition metal ions. As a result of such an astonishing range of functionalities, catechol-based systems have in recent years been subject to intense research, aimed at mimicking these natural systems in order to develop new functional materials and coatings. A comprehensive review of these studies is discussed in this paper.

The development of high-temperature PEM fuel cells (working at 150-200 degrees C) is pursued worldwide in order to solve some of the problems of current cells based on Nafion (CO tolerance, improved kinetics, water management, etc.). Polybenzimidazole membranes nanoimpregnated with phosphoric acid have been studied as electrolytes in PEMFCs for more than a decade. Commercially available polybenzimidazole (PBI) has been the most extensively studied and used for this application in membranes doped with all sorts of strong inorganic acids. In addition to this well-known polymer we also review here studies on ABPBI and other polybenzimidazole type membranes. More recently, several copolymers and related derivatives have attracted many researchers' attention, adding variety to the field. Furthermore, besides phosphoric acid, many other strong inorganic acids, as well as alkaline electrolytes have been used to impregnate benzimidazole membranes and are analyzed here. Finally, we also review different hybrid materials based on polybenzimidazoles and several inorganic proton conductors such as heteropoly acids, as well as sulfonated derivatives of the polymers, all of which contribute to a quickly-developing field with many blooming results and useful potential which are the subject of this critical review (317 references).

This work is a brief account of the most recent developments observed in the application of ZnO nanostructured materials in excitonic solar cells (organic, hybrid and dye sensitized solar cells). Special emphasis is made to one-dimensional (1D), vertically-aligned nanostructures (nanowires NW, nanorods NR) of ZnO semiconductor oxide and the extensive research work invested in recent years for its application as an electron acceptor material in solar cells. Our aim is to give the reader a broad overview of this semiconductor oxide and to understand the causes, advantages and disadvantages, for its application in a well-aligned nanostructure form. We briefly describe the most applied methodologies for its synthesis as well as the effect on surface area, electron transport and charge recombination when it is applied as an electron transport material in excitonic solar cells (XSCs). The importance of low-cost and easy-scalable synthesis techniques, as well as stability issues on these solar cells are discussed. Finally, we include a brief analysis of the possible future trends for the application of this interesting semiconductor oxide in XSCs.