Institut de Mécanique et d'Ingénierie de Bordeaux

Long QT syndrome (LQTS) is a heterogeneous inherited disorder causing syncope and sudden death from ventricular arrhythmias. A first locus for this disorder was mapped to chromosome 11p15.5. However, locus heterogeneity has been demonstrated in several families, and two other loci have recently been located on chromosomes 7q35-36 and 3p21-24. We used linkage analysis to map the locus in a 65-member family in which LQTS was associated with more marked sinus bradycardia than usual, leading to sinus node dysfunction. Linkage to chromosome 11p15.5, 7q35-36, or 3p21-24 was excluded. Positive linkage was obtained for markers located on chromosome 4q25-27. A maximal LOD score of 7.05 was found for marker D4S402. The identification of a fourth locus for LQTS confirms its genetic heterogeneity. Locus 4q25-27 is associated with a peculiar phenotype within the LQTS entity.

The authors examined associations between exposure to aluminum or silica from drinking water and risk of cognitive decline, dementia, and Alzheimer's disease among elderly subjects followed for 15 years (1988-2003). They actively searched for incident cases of dementia among persons aged 65 years or over living in 91 civil drinking-water areas in southern France. Two measures of exposure to aluminum were assessed: geographic exposure and individual exposure, taking into account daily consumption of tap water and bottled water. A total of 1,925 subjects who were free of dementia at baseline and had reliable water assessment data were analyzed. Using random-effects models, the authors found that cognitive decline with time was greater in subjects with a higher daily intake of aluminum from drinking water (>or=0.1 mg/day, P=0.005) or higher geographic exposure to aluminum. Using a Cox model, a high daily intake of aluminum was significantly associated with increased risk of dementia. Conversely, an increase of 10 mg/day in silica intake was associated with a reduced risk of dementia (adjusted relative risk =0.89, P=0.036). However, geographic exposure to aluminum or silica from tap water was not associated with dementia. High consumption of aluminum from drinking water may be a risk factor for Alzheimer's disease.

The dynamics of the three-phase contact line for water and ethanol is experimentally investigated using substrates of various hydrophobicities. Different evolutions of the droplet profile (contact line, R, and contact angle, θ) are found to be dependent on the hydrophobicity of the substrate. A simple theoretical approach based on the unbalanced Young force is used to explain the depinning of the contact line on hydrophilic surfaces or the monotonic slip on hydrophobic substrates. The second part of the article involves the addition of different quantities of titanium oxide nanoparticles to water, and a comparison of the evaporative behavior of these novel fluids with the base liquid (water) on substrates varying in hydrophobicity (i.e., silicon, Cytop, and PTFE) is presented. The observed stick-slip behavior is found to be dependent on the nanoparticle concentration. The evaporation rate is closely related to the dynamics of the contact line. These findings may have an important impact when considering the evaporation of droplets on different substrates and/or those containing nanoparticles.

Core Ideas OZCAR is a network of sites studying the critical zone. OZCAR covers various disciplines. OZCAR will help disciplines to work together for a better representation and modeling of the critical zone. The French critical zone initiative, called OZCAR (Observatoires de la Zone Critique–Application et Recherche or Critical Zone Observatories–Application and Research) is a National Research Infrastructure (RI). OZCAR‐RI is a network of instrumented sites, bringing together 21 pre‐existing research observatories monitoring different compartments of the zone situated between “the rock and the sky,” the Earth's skin or critical zone (CZ), over the long term. These observatories are regionally based and have specific initial scientific questions, monitoring strategies, databases, and modeling activities. The diversity of OZCAR‐RI observatories and sites is well representative of the heterogeneity of the CZ and of the scientific communities studying it. Despite this diversity, all OZCAR‐RI sites share a main overarching mandate, which is to monitor, understand, and predict (“earthcast”) the fluxes of water and matter of the Earth's near surface and how they will change in response to the “new climatic regime.” The vision for OZCAR strategic development aims at designing an open infrastructure, building a national CZ community able to share a systemic representation of the CZ, and educating a new generation of scientists more apt to tackle the wicked problem of the Anthropocene. OZCAR articulates around: (i) a set of common scientific questions and cross‐cutting scientific activities using the wealth of OZCAR‐RI observatories, (ii) an ambitious instrumental development program, and (iii) a better interaction between data and models to integrate the different time and spatial scales. Internationally, OZCAR‐RI aims at strengthening the CZ community by providing a model of organization for pre‐existing observatories and by offering CZ instrumented sites. OZCAR is one of two French mirrors of the European Strategy Forum on Research Infrastructure (eLTER‐ESFRI) project.

Observations over the 20th century evidence no long-term warming in the subpolar North Atlantic (SPG). This region even experienced a rapid cooling around 1970, raising a debate over its potential reoccurrence. Here we assess the risk of future abrupt SPG cooling in 40 climate models from the fifth Coupled Model Intercomparison Project (CMIP5). Contrary to the long-term SPG warming trend evidenced by most of the models, 17.5% of the models (7/40) project a rapid SPG cooling, consistent with a collapse of the local deep-ocean convection. Uncertainty in projections is associated with the models' varying capability in simulating the present-day SPG stratification, whose realistic reproduction appears a necessary condition for the onset of a convection collapse. This event occurs in 45.5% of the 11 models best able to simulate the observed SPG stratification. Thus, due to systematic model biases, the CMIP5 ensemble as a whole underestimates the chance of future abrupt SPG cooling, entailing crucial implications for observation and adaptation policy.

Selective Laser Melting (SLM) and Electron Beam Melting (EBM) are powder bed fusion processing which allows to build-up parts by successive addition of layers using 3D-CAD models. Among the advantages, are the high degree of freedom for part design and the small loss of material, which explain the increase of Ti-6Al-4V parts obtained by these processes. However, Ti-6Al-4V parts produced by SLM and EBM contain defects (surface roughness, porosity, tensile residual stresses) which decrease significantly the High Cycle Fatigue (HCF) life. In order to minimize the porosity and tensile residual stresses, post-processing treatments like Hot Isostatic Pressing (HIP) and Stress Relieving are often conducted. But the modification of the surface roughness by machining is very costly and not always possible, especially for parts with complex design. The aim of this work is to evaluate the effect of the surface roughness and microstructure of Ti-6Al-4V parts produced by SLM and EBM on the HCF life. Five sets of specimens were tested in tension-compression (R=-1; f=120Hz): Hot-Rolled (reference); SLM HIP machined; SLM HIP As-Built; EBM HIP machined; EBM HIP As-Built. For each condition, microstructure characterization, observation of the fracture surface of broken specimens and surface analysis were carried out respectively by Optical Microscope (OM), Scanning Electron Microscope (SEM) and 3D optical profilometer. Results of fatigue testing show a significant decrease of the HCF life mainly due to the surface roughness. Along with experimental testing, numerical simulations using FEM were conducted using the surface scans obtained by profilometry. Based on extreme values statistics of the crossland equivalent stress averaged on a critical distance, a methodology is proposed to take into account the effect of the surface roughness on the HCF life.

We study oil-in-water emulsions stabilised by pH-sensitive colloidal silica or latex particles. Depending on the composition of the continuous phase, the same type of particles and the same emulsification process lead to emulsions characterised either by large drops densely covered by the particles, or to small droplets which are weakly covered. The two kinetically stable states can be tuned reversibly by using pH or salinity as compositional stimuli. We examine the emulsions' behaviour in these two limiting cases and we discuss the possible mechanisms allowing stabilisation, especially in the case of low surface coverage.

An in-situ monitoring method was used to observe the initiation sites and the processes of pitting corrosion in aluminum alloy 2024-T3 (UNS A92024) in real time. These observations complemented more detailed information about composition and distribution of constituent particles, pre-and post-corrosion surface morphology, and the internal morphology of corrosion pits. In-situ observations provided a comprehensive view of the development of localized corrosion in real time. Results confirmed the importance of intermetallic constituent particles in promoting initiation and growth of pits in aluminum alloys. Heterogeneous distribution of these particles served to define the location and extent (or severity) of pitting. A conceptual model was proposed as a framework for continued research. The formation of occluded cells under corrosion product domes over severe pits was observed. This formation will be incorporated into an overall reconsideration and modeling of the processes of pitting corrosion of aluminum alloys.

This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain.

Acoustic metamaterial science is an emerging field at the frontier of modern acoustics. It provides a prominent platform for acoustic wave control in subwavelength-sized metadevices or metasystems. However, most of the metamaterials can only work in a narrow frequency band once fabricated, which limits the practical application of acoustic metamaterials. This paper highlights some recent progress in tunable acoustic metamaterials based on various modulation techniques. Acoustic metamaterials have been designed to control the attenuation of acoustic waves, invisibility cloaking, and acoustic wavefront engineering, such as focusing via manipulating the acoustic impedance of metamaterials. The reviewed techniques are promising in extending the novel acoustics response into wider frequency bands, in that tunable acoustic metamaterials may be exploited for unusual applications compared to conventional acoustic devices.

Microbialites are widespread in modern and fossil hypersaline environments, where they provide a unique sedimentary archive. Authigenic mineral precipitation in modern microbialites results from a complex interplay between microbial metabolisms, organic matrices and environmental parameters. Here, we combined mineralogical and microscopic analyses with measurements of metabolic activity in order to characterise the mineralisation of microbial mats forming microbialites in the Great Salt Lake (Utah, USA). Our results show that the mineralisation process takes place in three steps progressing along geochemical gradients produced through microbial activity. First, a poorly crystallized Mg-Si phase precipitates on alveolar extracellular organic matrix due to a rise of the pH in the zone of active oxygenic photosynthesis. Second, aragonite patches nucleate in close proximity to sulfate reduction hotspots, as a result of the degradation of cyanobacteria and extracellular organic matrix mediated by, among others, sulfate reducing bacteria. A final step consists of partial replacement of aragonite by dolomite, possibly in neutral to slightly acidic porewater. This might occur due to dissolution-precipitation reactions when the most recalcitrant part of the organic matrix is degraded. The mineralisation pathways proposed here provide pivotal insight for the interpretation of microbial processes in past hypersaline environments.

Soft materials that embed small resonators in a host material can dampen or focus sound.

The thermal properties of a material with a spatiotemporal modulation, in the form of a traveling wave, in both the thermal conductivity and the specific heat capacity are studied. It is found that these materials behave as materials with an internal convectionlike term that provides them with nonreciprocal properties, in the sense that the heat flux has different properties when it propagates in the same direction or in the opposite one to the modulation of the parameters. An effective medium description is presented which accurately describes the modulated material, and numerical simulations support this description and verify the nonreciprocal properties of the material. It is found that these materials are promising candidates for the design of thermal diodes and other advanced devices for the control of the heat flow at all scales.

Solar thermal energy storage is used in many applications, from building to concentrating solar power plants and industry. The temperature levels encountered range from ambient temperature to more than 1000 °C, and operating times range from a few hours to several months. This paper reviews different types of solar thermal energy storage (sensible heat, latent heat, and thermochemical storage) for low- (40–120 °C) and medium-to-high-temperature (120–1000 °C) applications.

Recently, metasurfaces have been proven to be effective and compact devices for the design of arbitrary wavefronts. Metasurfaces are planar metamaterials with a subwavelength thickness that allows wavefront shaping by introducing in-plane variations, namely, gradients, in the spatial wave response of these flat structures. Here we report a new class of acoustic gradient-index (GRIN) metasurfaces engineered from soft graded-porous silicone rubber with a high acoustic index for broadband ultrasonic three-dimensional wavefront shaping in water. The functionalities of these soft flat lenses are illustrated through various experiments, which demonstrate beam steering and beam focusing, as well as vortex beam generation in free space. These new GRIN metasurfaces may have important applications in various domains using designed ultrasonic fields (biomedical imaging, industrial non-destructive testing, contactless particle manipulation), since their fabrication is very straightforward with common polymer science engineering.

Abstract Good constraints on hydrogeological properties are an important first step in any quantitative model of groundwater flow. Field estimation of permeability is difficult as it varies over orders of magnitude in natural systems and is scale‐dependent. Here we directly compare permeabilities inferred from tidal responses with conventional large‐scale, long‐term pumping tests at the same site. Tidally induced water pressure changes recorded in wells are used to infer permeability at ten locations in a densely fractured sandstone unit. Each location is either an open‐hole well or a port in a multilevel monitoring well. Tidal response is compared at each location to the results of two conventional, long‐term and large scale pumping tests performed at the same site. We obtained consistent values between the methods for a range of site‐specific permeabilities varying from ∼10 −15 m 2 to 10 −13 m 2 for both open wells with large open intervals and multilevel monitoring well. We conclude that the tidal analysis is able to capture passive and accurate estimates of permeability.

Contactless manipulation of microparticles using acoustic waves holds promise for applications ranging from cell sorting to three-dimensional (3D) printing and tissue engineering. However, the unique potential of acoustic trapping to be applied in biomedical settings remains largely untapped. In particular, the main advantage of acoustic trapping over optical trapping, namely the ability of sound to propagate through thick and opaque media, has not yet been exploited in full. Here we demonstrate experimentally the use of the recently developed technique of single-beam acoustical tweezers to trap microbubbles, an important class of biomedically relevant microparticles. We show that the region of vanishing pressure of a propagating vortex beam can confine a microbubble by forcing low-amplitude, nonspherical, shape oscillations, enabling its full 3D positioning. Our interpretation is validated by the absolute calibration of the acoustic trapping force and the direct spatial mapping of isolated bubble echos, for which both find excellent agreement with our theoretical model. Furthermore, we prove the stability of the trap through centimeter-thick layers of bio-mimicking, elastic materials. Finally, we demonstrate the simultaneous trapping of nanoparticle-loaded microbubbles and activation with an independent acoustic field to trigger the release of the nanoparticles. Overall, using exclusively acoustic powering to position and actuate microbubbles paves the way toward controlled delivery of drug payloads in confined, hard-to-reach locations, with potential in vivo applications.

Abstract The scope of this work is to present and discuss the results obtained from simulating three-dimensional plunging breaking waves by solving the Navier–Stokes equations, in air and water. Recent progress in computational capabilities has allowed us to run fine three-dimensional simulations, giving us the opportunity to study for the first time fine vortex filaments generated during the early stage of the wave breaking phenomenon. To date, no experimental observations have been made in laboratories, and these structures have only been visualised in rare documentary footage (e.g. BBC 2009 South Pacific. Available on YouTube, 7BOhDaJH0m4 ). These fine coherent structures are three-dimensional streamwise vortical tubes, like vortex filaments, connecting the splash-up and the main tube of air, elongated in the main flow direction. The first part of the paper is devoted to the presentation of the model and numerical methods. The air entrainment occurring when waves break is then carefully described. Thanks to the high resolution of the grid, these fine elongated structures are simulated and explained.

Discontinuous carbon fibre tows were recovered after solvolysis of an aeronautic type composite made with RTM6 epoxy resin. A Sohxlet extraction method was used to quantify the organic residue on the fibre tows and showed that less than 3 wt% was remaining on the surface. The recovered tows were therefore reused directly to manufacture a plate with randomly distributed carbon fibres and then three plates with realigned carbon fibres. The latter were then characterised and tested and the results obtained were compared to the material manufactured using the same type of virgin fibres by the same method. The materials made from recycled carbon fibres showed very good properties in comparison to the virgin fibre material, despite the presence of flaws such as quality of the fibre surface after solvolysis, alignment and voids). This is the first time in the open literature that carbon fibres recovered from solvolysis were reused in this way together with characterisation of the resulting materials.

A tailored metamaterial---which promises material properties beyond what nature can give us---exhibits a long-sought connection between some elastic-wave parameters, providing a new path to controlling wave propagation in artificial structures.