Institut de Sciences des Matériaux de Mulhouse

Hard carbons are considered among the most promising anode materials for Na‐ion batteries. Understanding their structure is of great importance for optimizing their Na storage capabilities and therefore achieving high performance. Herein, carbon nanofibers (CNFs) are prepared by electrospinning and their microstructure, texture, and surface functionality are tailored through carbonization at various temperatures ranging from 650 to 2800 °C. Stepwise carbonization gradually removes the heteroatoms and increases the graphitization degree, enabling us to monitor the corresponding electrochemical performance for establishing a correlation between the CNFs characteristics and Na storage behavior. Outstandingly, it is found that for CNFs carbonized at above 2000 °C, a single voltage Na uptake plateau at ≈0.1 V with a capacity of ≈200 mAh g ‐1 . This specific performance may be nested in the higher degree of graphitization, lower active surface area, and different porous texture of the CNFs at such temperatures. It is demonstrated via the assembly of a CNF/Na 2 Fe 2 (SO 4 ) 3 cell the benefit of such CNFs electrode for enhancing the energy density of full Na‐ion cells. This finding sheds new insights in the quest for high performance carbon based anode materials.

Thermal properties of ternary carbides with composition ${\text{Ti}}_{3}{\text{SiC}}_{2}$, ${\text{Ti}}_{3}{\text{AlC}}_{2}$, and ${\text{Ti}}_{3}{\text{GeC}}_{2}$ were studied using the first-principles phonon calculations. The thermal expansions, the heat capacities at constant pressure, and the isothermal bulk moduli at finite temperatures were obtained under the quasiharmonic approximation. Comparisons were made with the available experimental data and excellent agreements were obtained. Phonon band structures and partial density of states were investigated. These compounds present unusual localized phonon states at low frequencies, which are due to atomiclike vibrations parallel to the basal plane of the Si, Al, or Ge elements.

Active camouflage is widely recognized as a soft-tissue feature, and yet the ability to integrate adaptive coloration and tissuelike mechanical properties into synthetic materials remains elusive. We provide a solution to this problem by uniting these functions in moldable elastomers through the self-assembly of linear-bottlebrush-linear triblock copolymers. Microphase separation of the architecturally distinct blocks results in physically cross-linked networks that display vibrant color, extreme softness, and intense strain stiffening on par with that of skin tissue. Each of these functional properties is regulated by the structure of one macromolecule, without the need for chemical cross-linking or additives. These materials remain stable under conditions characteristic of internal bodily environments and under ambient conditions, neither swelling in bodily fluids nor drying when exposed to air.

The reactivity of the zinc(+2) salt allows tuning of the size and catalytic activity of ZIF-8 crystals.

The use of LEDs as novel and efficient light sources for the photopolymerization of various monomers (acylate, epoxy), interpenetrating polymer networks and thiols–ene, leads to the development of novel photoinitiating systems adapted for the LED emission.

Experimental measurements and molecular simulations were conducted for two zeolitic imidazolate frameworks, ZIF-8 and ZIF-76. The transferability of the force field was tested by comparing molecular simulation results of gas adsorption with experimental data available in the literature for other ZIF materials (ZIF-69). Owing to the good agreement observed between simulation and experimental data, the simulation results can be used to identify preferential adsorption sites, which are located close to the organic linkers. Topological mapping of the potential-energy surfaces makes it possible to relate the preferential adsorption sites, Henry constant, and isosteric heats of adsorption at zero coverage to the nature of the host-guest interactions and the chemical nature of the organic linker. The role played by the topology of the solid and the organic linkers, instead of the metal sites, upon gas adsorption on zeolite-like metal-organic frameworks is discussed.

Abstract The germline mutation rate determines the pace of genome evolution and is an evolving parameter itself 1 . However, little is known about what determines its evolution, as most studies of mutation rates have focused on single species with different methodologies 2 . Here we quantify germline mutation rates across vertebrates by sequencing and comparing the high-coverage genomes of 151 parent–offspring trios from 68 species of mammals, fishes, birds and reptiles. We show that the per-generation mutation rate varies among species by a factor of 40, with mutation rates being higher for males than for females in mammals and birds, but not in reptiles and fishes. The generation time, age at maturity and species-level fecundity are the key life-history traits affecting this variation among species. Furthermore, species with higher long-term effective population sizes tend to have lower mutation rates per generation, providing support for the drift barrier hypothesis 3 . The exceptionally high yearly mutation rates of domesticated animals, which have been continually selected on fecundity traits including shorter generation times, further support the importance of generation time in the evolution of mutation rates. Overall, our comparative analysis of pedigree-based mutation rates provides ecological insights on the mutation rate evolution in vertebrates.

The metal-organic framework MIL-100(Al) has been used as a host to synthesize Pd nanoparticles (around 2.0 nm) embedded within the pores of the MIL, showing one of the highest metal contents (10 wt %) without degradation of the porous host. Textural properties of MIL-100(Al) are strongly modified by Pd insertion, leading to significant changes in gas sorption properties. The loss of excess hydrogen storage at low temperature can be correlated with the decrease of the specific surface area and pore volume after Pd impregnation. At room temperature, the hydrogen uptake in the composite MIL-100(Al)/Pd is almost twice that of the pristine material. This can be only partially accounted by Pd hydride formation, and a "spillover" mechanism is expected to take place promoting the dissociation of molecular hydrogen at the surface of the metal nanoparticles and the diffusion of monatomic hydrogen into the porosity of the host metal-organic framework.

Highly functionalized benzo[b]phosphole oxides were synthesized from reactions of arylphosphine oxides with alkynes under photocatalytic conditions by using eosin Y as the catalyst and N-ethoxy-2-methylpyridinium tetrafluoroborate as the oxidant. The reaction works under mild conditions and has a broad substrate scope. Mechanistic investigations have been undertaken and revealed the formation of a ground state electron donor-acceptor complex (EDA) between eosin (the photocatalyst) and the pyridinium salt (the oxidation agent). This complex, which has been fully characterized both in the solid state and in solution, turned out to exhibit a dual role, i.e., the oxidation of the photocatalyst and the formation of the initiating radicals, which undergoes an intramolecular reaction avoiding the classical diffusion between the two reactants. The involvement of ethoxy and phosphinoyl radicals in the photoreaction has unequivocally been evidenced by EPR spectroscopy.

Cells have evolved multiple mechanisms to apprehend and adapt finely to their environment. Here we report a new cellular ability, which we term "curvotaxis" that enables the cells to respond to cell-scale curvature variations, a ubiquitous trait of cellular biotopes. We develop ultra-smooth sinusoidal surfaces presenting modulations of curvature in all directions, and monitor cell behavior on these topographic landscapes. We show that adherent cells avoid convex regions during their migration and position themselves in concave valleys. Live imaging combined with functional analysis shows that curvotaxis relies on a dynamic interplay between the nucleus and the cytoskeleton-the nucleus acting as a mechanical sensor that leads the migrating cell toward concave curvatures. Further analyses show that substratum curvature affects focal adhesions organization and dynamics, nuclear shape, and gene expression. Altogether, this work identifies curvotaxis as a new cellular guiding mechanism and promotes cell-scale curvature as an essential physical cue.

The objective of this work was to study the adsorption and separation of the most important families of hydrocarbon compounds on metal-organic frameworks (MOFs), in comparison with zeolites. For this purpose, we have selected four probe molecules, each of them representing one of these families, i.e., o- and p-xylene as aromatics, 1-octene as an alkene, and n-octane as an alkane. The separation of these four molecules was studied by binary breakthrough experiments. To represent the large diversity of MOF structures, the experiments were carried out with (i) two MOFs with coordinatively unsaturated metal sites (CUS), i.e., Cu-btc (HKUST-1) and CPO-27-Ni, (ii) a MOF with an anionic framework and extraframework cations, i.e. RHO-ZMOF, and (iii) two rather apolar zeolitic imidazolate framework (ZIF) materials with different pore sizes, i.e. ZIF-8 and ZIF-76. Zeolite NaY and zeolite β were used as polar and apolar reference adsorbents, respectively. The results can be briefly summarized as follows: ZIFs (not carrying any polar functional groups) behave like apolar adsorbents and exhibit very interesting and unexpected molecular sieving properties. CUS-MOFs behave like polar adsorbents but show the specificity of preferring alkenes over aromatics. This feature is rationalized thanks to DFT+D calculations. MOFs with extraframework cations behave like polar (cationic) zeolites.

The need to control the adhesion of cells to material surfaces plays an important role in determining the design of biomaterial substrates for biotechnology and tissue-engineering applications. As a the first step in a cascade of cellular events, adhesion affects many aspects of cell function, including spreading, migration, proliferation and differentiation. After a short description of cell adhesion and essential molecules involved in, the present knowledge on the influence of surface topography on cell behavior will be described by considering not only the amplitude of the surface topography but also its organization at all scales (micro- and nano-scale). The biological mechanisms underlying the cell response to topography will be evoked. Secondly, the influence of surface chemistry as well as surface energy on cell adhesion will be described. Thirdly, as the cells never interact with a bare material but with materials on which the proteins from biological fluids have adsorbed, some studies on the role of proteins in cell adhesion will be used to illustrate this point. Finally, the influence of substrate mechanics on cell differentiation will be described.

Condensations and cycloadditions can be catalyzed by newly synthesized Cu-doped zeolitic imidazolate frameworks (ZIFs). The catalysts were well characterized and reusable.

Otherwise sluggish or completely ineffective radical reductions of alkyl and aryl halides by N-heterocyclic carbene boranes (NHC-boranes) are catalyzed by thiols. Reductions and reductive cyclizations with readily available 1,3-dimethylimidazol-2-ylidene borane and a water-soluble triazole relative are catalyzed by thiophenol and tert-dodecanethiol [C(9)H(19)C(CH(3))(2)SH]. Rate constants for reaction of the phenylthiyl (PhS•) radical with two NHC-boranes have been measured to be ~10(8) M(-1) s(-1) by laser flash photolysis experiments. An analysis of the available evidence suggests the operation of polarity reversal catalysis.

The interest in organic-inorganic hybrids as materials for optics and photonics started more than 25 years ago and since then has known a continuous and strong growth. The high versatility of sol-gel processing offers a wide range of possibilities to design tailor-made materials in terms of structure, texture, functionality, properties and shape modelling. From the first hybrid material with optical functional properties that has been obtained by incorporation of an organic dye in a silica matrix, the research in the field has quickly evolved towards more sophisticated systems, such as multifunctional and/or multicomponent materials, nanoscale and self-assembled hybrids and devices for integrated optics. In the present critical review, we have focused our attention on three main research areas: passive and active optical hybrid sol-gel materials, and integrated optics. This is far from exhaustive but enough to give an overview of the huge potential of these materials in photonics and optics (254 references).

A current medical challenge is the replacement of tissue which can be thought of in terms of bone tissue engineering approaches. The key problem in bone tissue engineering lies in associating bone stem cells with material supports or scaffolds that can be implanted in a patient. Beside bone tissue engineering approaches, these types of materials are used daily in orthopaedics and dental practice as permanent or transitory implants such as ceramic bone filling materials or metallic prostheses. Consequently, it is essential to better understand how bone cells interact with materials. For several years, the current authors and others have developed in vitro studies in order to elucidate the mechanisms underlying the response of human bone cells to implant surfaces. This paper reviews the current state of knowledge and proposes future directions for research in this domain.

This study investigates the adhesion, cytoskeletal changes, and resorptive activity of disaggregated rat osteoclasts cultured on polished slices of three biomaterials: crystalline synthetic hydroxyapatite (HA), carbonated hydroxyapatite (C-HA), and natural calcium carbonate (C). The surface chemistry of each substrate was defined by X-ray diffraction and IR spectroscopy, surface wettability by the dispersive, and the polar components of the surface energies. Osteoclast adhesion was modulated by the polar component of the surface energy: fewer (p < 0.01) osteoclasts adhered to C-HA (97 +/- 20/slice, surface energy 9 +/- 5 mJ/m2) than to HA (234 +/- 16/slice, surface energy 44 +/- 2 mJ/m2) or to C (268 +/- 37/slice, surface energy 58 +/- 0.5 mJ/m2). Actin rings, which are the cytoskeletal structure essential for resorption, developed on all three materials. The area of the actin ring, which is resorbed by local acidification, and the osteoclast area, which reflects osteoclast spreading, were both greater in osteoclasts cultured on HA and C-HA than in those cultured on C. C was resorbed, but HA and C-HA were not. Thus, the surface energy plays an essential role in osteoclast adhesion, whereas osteoclast spreading may depend on the surface chemistry, especially on protein adsorption and/or on newly formed apatite layers. Resorption may be limited to the solubility of the biomaterial.

The present paper reviews some aspects concerned with the development of green technologies in the photopolymerization area: use of visible light sources (Xe and Hg-Xe lamps, diode lasers), soft irradiation conditions (household lamps: halogen lamp, fluorescence bulbs, LED bulbs), sunlight exposure, development of very efficient photoinitiating systems and use of renewable monomers. The drawbacks/breakthroughs encountered when going on the way of a greener approach are discussed. Examples of recent achievements are presented.

Photopolymerization under near-infrared (NIR) light is challenging due to the low energy of the absorbed photon but, if successful, presents significant advantages. For example, this lower energy wavelength is safer than UV light that is currently the standard photocuring light source. Also, NIR allows for a deeper light penetration within the material and therefore resulting in a more complete curing of thicker materials containing fillers for access to composites. In this study, we report the use of three-component systems for the NIR photopolymerization of methacrylates: (1) a dye used as a photosensitizer in the NIR range, (2) an iodonium salt as a photoinitiator for the free radical polymerization of the (meth)acrylates, and (3) a phosphine to prevent polymerization inhibition due to the oxygen and to regenerate the dye upon irradiation. Several NIR-absorbing dyes such as a cyanine borate and a silicon–phthalocyanine are presented and studied. Systems using borate dyes resulted in methacrylate monomer conversion over 80% in air. We report three types of irradiation system: low-power LED at 660 and 780 nm as well as a higher power laser diode at 785 nm. The excellent performance reported in this work is due to the crucial role of the added phosphine.

Solid char is a product of biomass pyrolysis. It contains a high proportion of carbon, and lower contents of H, O and minerals. This char can have different valorization pathways such as combustion for heat and power, gasification for Syngas production, activation for adsorption applications, or use as a soil amendment. The optimal recovery pathway of the char depends highly on its physical and chemical characteristics. In this study, different chars were prepared from beech wood particles under various pyrolysis operating conditions in an entrained flow reactor (500–1400 °C). Their structural, morphological, surface chemistry properties, as well as their chemical compositions, were determined using different analytical techniques, including elementary analysis, Scanning Electronic Microscopy (SEM) coupled with an energy dispersive X-ray spectrometer (EDX), Fourier Transform Infra-Red spectroscopy (FTIR), and Raman Spectroscopy. The biomass char reactivity was evaluated in air using thermogravimetric analysis (TGA). The yield, chemical composition, surface chemistry, structure, morphology and reactivity of the chars were highly affected by the pyrolysis temperature. In addition, some of these properties related to the char structure and chemical composition were found to be correlated to the char reactivity.