Institut Rayonnement-Matière de Saclay

Quantum EXPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the-art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudopotential and projector-augmented-wave approaches. Quantum EXPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement their ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software.

Using atomic resolved scanning tunneling microscopy, we present here the experimental evidence of a silicene sheet (graphenelike structure) epitaxially grown on a close-packed silver surface [Ag(111)]. This has been achieved via direct condensation of a silicon atomic flux onto the single-crystal substrate in ultrahigh vacuum conditions. A highly ordered silicon structure, arranged within a honeycomb lattice, is synthesized and present two silicon sublattices occupying positions at different heights (0.02 nm) indicating possible sp2-sp3 hybridizations.

This article reports or, the international Nanofluid Property Benchmark Exercise, or INPBE. in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or "nanofluids", was measured by over 30 organizations worldwide, using, a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band (+/- 10% or less) about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio. as expected from classical theory. There are (small) systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however. such differences tend to disappear when the data are normalized to the Measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. [J. Appl. Phys. 81, 6692 (1997)], was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.

Scanning tunneling microscopy (STM) and ab initio calculations based on density functional theory (DFT) were used to study the self-aligned silicon nanoribbons on Ag(110) with honeycomb, graphene-like structure. The silicon honeycombs structure on top of the silver substrate is clearly observed by STM, while the DFT calculations confirm that the Si atoms adopt spontaneously this new silicon structure.

Fuel cell reactions invariably involve an oxygen reduction reaction (ORR) at the cathode, which is one of the main rate-decreasing steps on platinum (Pt)-catalysts in the water formation reaction and energy conversion efficiency in polymer electrolyte membrane fuel cells (PEMFCs). The Pt scarcity and cost have led to the development of alternative catalyst materials for fuel cell applications. This paper reviews ORR catalysts with regard to their classification, mechanism, activity and performances. From conventional Pt-based catalysts to non-noble metal or bio-inspired catalysts, we show how significant progresses were made in ORR catalysis.

A blooming tree illustrates how CO2 can be recycled to a variety of chemicals based on a strategy discussed by T. Cantat and co-workers in their Communication on page 187 ff. The approach relies on the simultaneous use of a functionalizing reagent and a reductant that can be independently adjusted to access a variety of molecules from CO2. The direct conversion of CO2, amines, and silanes to formamides is reported.

The radiolysis of water due to ionizing radiation results in the production of electrons, H· atoms, ·OH radicals, H3O+ ions and molecules (dihydrogen H2 and hydrogen peroxide H2O2). A brief history of the development of the understanding of water radiolysis is presented, with a focus on the H2 production. This H2 production is strongly modified at oxide surfaces. Different parameters accounting for this behavior are presented.

We report on the electronic properties of straight, 1.6 nm wide, silicene nanoribbons on Ag(110), arranged in a one-dimensional grating with a pitch of 2 nm, whose high-resolution scanning tunneling microscopy images reveal a honeycomb geometry. Angle-resolved photoemission shows quantum confined electronic states of one-dimensional character. The silicon band dispersion along the direction of the nanoribbons suggests a behavior analogous to the Dirac cones of graphene on different substrates.

Bismuth ferrite, BiFeO3, is the only known room-temperature magnetic ferroelectric material. We demonstrate here, using neutron scattering measurements in high quality single crystals, that the antiferromagnetic and ferroelectric order parameters are intimately coupled. Initially in a single ferroelectric state, our crystals have a canted antiferromagnetic structure describing a unique cycloid. Under electrical poling, polarization reorientation induces a spin flop. We argue here that the coupling between the two orders may be stronger in the bulk than in thin films where the cycloid is absent.

Carbon‐oxide and carbon‐sulfide nanocomposites have attracted tremendous interest as the anode materials for Li and Na ion batteries. Such composites are fascinating as they often show synergistic effect compared to their singular components. Carbon nanomaterials are often used as the matrix due to their high conductivity, tensile strength, and chemical stability under the battery condition. Metal oxides and sulfides are often used as active material fillers because of their large capacity. Numerous works have shown that by taking one step further into fabricating nanocomposites with rational structure design, much better performance can be achieved. The present review aims to present and discuss the development of carbon‐based nanocomposite anodes in both Li ion batteries and Na ion batteries. The authors introduce the individual components in the composites, i.e., carbon matrices (e.g., carbon nanotube, graphene) and metal oxides/sulfides; followed by evaluating how advanced nanostructures benefit from the synergistic effect when put together. Particular attention is placed on strategies employed in fabricating such composites, with examples such as yolk–shell structure, layered‐by‐layered structure, and composite comprising one or more carbon matrices. Lastly, the authors conclude by highlighting challenges that still persist and their perspective on how to further develop the technologies.

Since carbon nanotubes (CNTs) display unique structures and remarkable physical properties, a variety of applications have emerged in both materials and life sciences. In terms of applications, the functionalisation of nanotubes is extremely important, as it increases their solubility and processability, and combines the unique properties of single-walled carbon nanotubes (SWCNTs) with those of other classes of materials. A number of methods have been developed, which can be divided into two major approaches: (1) non-covalent supramolecular modifications, and (2) covalent functionalisation. In this tutorial review, we survey the covalent modification of SWCNTs with organic moieties, and illustrate the major analytical techniques routinely used to characterise the functionalised materials.

Lateral thinking: A diagonal approach to CO2 recycling has been explored for the formation of both functionalized and energetic chemicals featuring a reduced carbon center. The strategy relies on the tandem use of a functionalization reagent and a reductant that can be independently modified to access a wide spectrum of chemicals from CO2. It is exemplified with an organocatalytic process to convert CO2 into formamides (see picture). Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Ecotoxicological effects of nanoparticles (NP) are still poorly documented while their commercialization for industrial and household applications increases. The aim of this study was to evaluate the influence of physicochemical characteristics on metal oxide NP and carbon nanotubes toxicological effects toward bacteria. Two strains of bacteria, Cupriavidus metallidurans CH34 and Escherichia coli MG1655 were exposed to TiO(2) or Al(2)O(3) NP or to multiwalled-carbon nanotubes (MWCNT). Particular attention was paid on optimizing NP dispersion to obtain nonagglomerated suspensions. Our results show that NP toxicity depends on their chemical composition, size, surface charge, and shape but not on their crystalline phase. MWCNT toxicity does not depend on their purity. Toxicity also depends on the bacterial strain: E. coli MG1655 is sensitive to NP, whereas C. metallidurans CH34 is not. Interestingly, NP are accumulated in both bacterial strains, and association between NP and bacteria is necessary for bacterial death to occur. NP may then represent a danger for the environment, causing the disappearance of some sensitive bacterial strains such as E. coli MG1655, but also being mobilized by nonsensitive strains such as C. metallidurans CH34 and transported through the whole ecosystem.

The Geant4-DNA project proposes to develop an open-source simulation software based and fully included in the general-purpose Geant4 Monte-Carlo simulation toolkit. The main objective of this software is to simulate biological damages induced by ionizing radiations at the cellular and sub-cellular scale. This project was originally initiated by the European Space Agency for the prediction of the deleterious effects of radiations that may affect astronauts during future long duration space exploration missions. In this paper, the Geant4-DNA collaboration presents an overview of the whole on-going project, including its most recent developments that are available in the Geant4 toolkit since December 2009 (release 9.3), as well as an illustration example simulating the direct irradiation of a biological chromatin fiber. Expected extensions involving several research domains, such as particle physics, chemistry and cellular and molecular biology, within a fully interdisciplinary activity of the Geant4 collaboration are also discussed.

PURPOSE: The GEANT4 general-purpose Monte Carlo simulation toolkit is able to simulate physical interaction processes of electrons, hydrogen and helium atoms with charge states (H0, H+) and (He0, He+, He2+), respectively, in liquid water, the main component of biological systems, down to the electron volt regime and the submicrometer scale, providing GEANT4 users with the so-called "GEANT4-DNA" physics models suitable for microdosimetry simulation applications. The corresponding software has been recently re-engineered in order to provide GEANT4 users with a coherent and unique approach to the simulation of electromagnetic interactions within the GEANT4 toolkit framework (since GEANT4 version 9.3 beta). This work presents a quantitative comparison of these physics models with a collection of experimental data in water collected from the literature. METHODS: An evaluation of the closeness between the total and differential cross section models available in the GEANT4 toolkit for microdosimetry and experimental reference data is performed using a dedicated statistical toolkit that includes the Kolmogorov-Smirnov statistical test. The authors used experimental data acquired in water vapor as direct measurements in the liquid phase are not yet available in the literature. Comparisons with several recommendations are also presented. RESULTS: The authors have assessed the compatibility of experimental data with GEANT4 microdosimetry models by means of quantitative methods. The results show that microdosimetric measurements in liquid water are necessary to assess quantitatively the validity of the software implementation for the liquid water phase. Nevertheless, a comparison with existing experimental data in water vapor provides a qualitative appreciation of the plausibility of the simulation models. The existing reference data themselves should undergo a critical interpretation and selection, as some of the series exhibit significant deviations from each other. CONCLUSIONS: The GEANT4-DNA physics models available in the GEANT4 toolkit have been compared in this article to available experimental data in the water vapor phase as well as to several published recommendations on the mass stopping power. These models represent a first step in the extension of the GEANT4 Monte Carlo toolkit to the simulation of biological effects of ionizing radiation.

We report the experimental realization of a hybrid quantum circuit combining a superconducting qubit and an ensemble of electronic spins. The qubit, of the transmon type, is coherently coupled to the spin ensemble consisting of nitrogen-vacancy centers in a diamond crystal via a frequency-tunable superconducting resonator acting as a quantum bus. Using this circuit, we prepare a superposition of the qubit states that we store into collective excitations of the spin ensemble and retrieve back into the qubit later on. These results constitute a proof of concept of spin-ensemble based quantum memory for superconducting qubits.

Unprecedented transformations have been developed over the last years to convert amines to formamides, formamidines and methylamines, in the presence of CO₂ as a reagent. These emerging technologies are reviewed in this perspective and the opportunities and challenges facing the practical use of CO₂ in the production of nitrogen molecules are discussed.

A highly active organocatalytic system based on N-heterocyclic carbenes has been designed for the formylation of N-H bonds in a large variety of nitrogen molecules and heterocycles, using two chemical wastes: CO(2) and polymethylhydrosiloxane (PMHS).

A novel catalytic reaction has been designed to utilize, for the first time, CO2 as a C1 feedstock in the synthesis of N-methylamines. Simple zinc catalysts, based on commercially available zinc salts and ligands, prove highly efficient in promoting both a 6 electron reduction of carbon dioxide and the formation of a C–N bond, using hydrosilanes and amines.

Since the papyri, cellulose has played a significant role in human culture, especially as paper. Nowadays, this ancient product has found new scientific applications in the expanding sector of paper-based technology. Among paper-based devices, paper-based biosensors raise a special interest. The high selectivity of biomolecules for target analytes makes these sensors efficient. Moreover, simple paper-based detection devices do not require hardware or specific technical skill. They are inexpensive, rapid, user-friendly and therefore highly promising for providing resource-limited settings with point-of-care diagnostics. The immobilization of biomolecules onto cellulose is a key step in the development of these sensing devices. Following an overview of cellulose structural features and physicochemical properties, this article reviews current techniques for the immobilization of biomolecules on paper membranes. These procedures are categorized into physical, biological and chemical approaches. There is no universal method for biomolecule immobilization. Thus, for a given paper-based biochip, each strategy can be considered.