ISIS Neutron and Muon Source

The structure of 1 : 2 choline chloride : urea (reline) deep eutectic solvent has been determined, showing extensive hydrogen bonding between all species.

Sodium filling inside hard carbon pores demonstrates increasingly metallic character with increasing pore size.

The low-and high-temperature structures of La2CoMnO6 and La2NiMnO6 have been refined using powder neutron diffraction. At low temperatures the materials adopt a charge-ordered monoclinic structure which transforms to a rhombohedral structure at elevated temperature without loss of charge ordering. This charge ordering scheme allows us for the first time to rationalize the relationships between the physical and structural properties of these materials.

Perovskite solar cells containing a mixture of A-site cations show increased activation energies for iodide diffusion.

) in reline, a feature herein discussed for the first time. In reline, urea molecules form a wide range of hydrogen bonds, from soft contacts to stronger associations, the latter being responsible for the deviation from ideality. The chloride's interactions with choline are largely conserved at the hydroxyl end while becoming weaker at the cationic headgroup. The interplay of soft and strong interactions confers flexibility to the newly formed hydrogen-bond network and allows the ensemble to remain liquid at room temperature.

Using neutron reflectivity, self-stratification in a model P3HT/PCBM blend is observed. The as-spun and solvent-annealed films show a depletion of PCBM near the top surface and enrichment of PCBM at the substrate (see figure). Depletion of PCBM at the cathode interface in a photovoltaic device could act as a barrier to efficient electron extraction. On thermal annealing, the PCBM depleted region is eliminated; an effect that partially explains the improvement of P3HT/PCBM devices on thermal annealing.

Resonant acoustic mixing (RAM) is a new technology designed for intensive mixing of powders that offers the capability to process powders with minimal damage to particles. This feature is particularly important for mixing impact-sensitive materials such as explosives and propellants. While the RAM technique has been extensively employed for the mixing of powders and viscous polymers, comparatively little is known about its use for mechanosynthesis. We present here the first in situ study of RAM-induced co-crystallisation monitored using synchrotron X-ray powder diffraction. The phase profile of the reaction between nicotinamide and carbamazepine in the presence of a small amount of water was monitored at two different relative accelerations of the mixer. In marked contrast to ball-milling techniques, the lack of milling bodies in the RAM experiment does not hinder co-crystallisation of the two starting materials, which occurred readily and was independent of the frequency of oscillation. The reaction could be optimised by enhancing the number of reactive contacts through mixing and comminution. These observations provide new insight into the role of various experimental parameters in conventional mechanochemistry using liquid-assisted grinding techniques.

Quantum-sized metallic clusters protected by biological ligands represent a new class of luminescent materials; yet the understanding of structural information and photoluminescence origin of these ultrasmall clusters remains a challenge. Herein we systematically study the surface ligand dynamics and ligand-metal core interactions of peptide-protected gold nanoclusters (AuNCs) with combined experimental characterizations and theoretical molecular simulations. We show that the peptide sequence plays an important role in determining the surface peptide structuring, interfacial water dynamics and ligand-Au core interaction, which can be tailored by controlling peptide acetylation, constituent amino acid electron donating/withdrawing capacity, aromaticity/hydrophobicity and by adjusting environmental pH. Specifically, emission enhancement is achieved through increasing the electron density of surface ligands in proximity to the Au core, discouraging photoinduced quenching, and by reducing the amount of surface-bound water molecules. These findings provide key design principles for understanding the surface dynamics of peptide-protected nanoparticles and maximizing the photoluminescence of metallic clusters through the exploitation of biologically relevant ligand properties.

). Quasi-elastic neutron scattering (QENS) suggests that the proton dynamics of MFM-512 are mediated by "free diffusion inside a sphere" confirming that incorporation of free carboxylic acid groups within the pores of MOFs is an efficient albeit synthetically challenging strategy to improve proton conductivity.

Manganese oxides, notably γ-MnO₂ and modified derivatives, have played a major role in electrochemical energy storage for well over a century.

The impact sensitivity of energetic materials is successfully predicted using an <italic>ab initio</italic> model based on the concepts of phonon up-pumping.

The synthesis of pure, cubic-phase Al-doped lithium stuffed garnets by fast microwave-assisted methods has been realised and the use of muon spectroscopy to probe and understand in greater detail the Li⁺ diffusion properties demonstrated.

A new fabrication method <italic>via</italic> sequentially depositing donor and acceptor layers can push the power conversion efficiency of organic solar cells based on non-fullerene acceptors to over 10%.

Distorted octahedral complexes of Sn(<sc>iv</sc>) with thio- and seleno-ether ligands have been used as single source precursors in low pressure CVD experiments under various conditions to deposit tin mono and dichalcogenide thin films.

The highest-resolution neutron scattering yet reported is used to examine disorder, and the order–disorder transition temperature is found to depend on elemental composition.

The effect of water on the physicochemical properties of deep eutectic solvents (DES) is a trending research topic. In this work, inelastic neutron scattering (INS) spectroscopy, was used to probe intermolecular interactions in the water-deep eutectic solvent mixtures for the cases of choline chloride (the hydrogen bond acceptor) and three different hydrogen bond donors, with different degrees of acidity: urea, glycerol and lactic acid. It was found that quenching samples in liquid nitrogen is a procedure that may retain the liquid phase morphology of DES at the low temperatures required by INS spectroscopy. The three studied systems share the preference of water molecules to bind to chloride anion, as predicted by numerous molecular dynamics simulations. Despite this similarity, the three systems present several distinct INS features upon water addition that are related to their unique properties and structure at the molecular level. In the choline chloride:urea system, water molecules promote a strengthening of hydrogen bonds with the NH and OH donors, while for the choline chloride:lactic acid system INS probed the existence of solvated DES clusters instead of specifically interfering water molecules. This study takes advantage from the unique capabilities of INS and paves the way for future studies in these systems.

Impedance spectroscopy shows the bromide concentration required to supress the low frequency response from mobile ions.

Control of the interfacial structures of ionic liquids (ILs) at charged interfaces is important to many of their applications, including in energy storage solutions, sensors and advanced lubrication technologies utilising electric fields. In the case of the latter, there is an increasing demand for the study of non-halogenated ILs, as many fluorinated anions have been found to produce corrosive and toxic halides under tribological conditions. Here, the interfacial structuring of a series of four imidazolium ILs ([CnC1Im]) of varying alkyl chain lengths (n = 5, 6, 7, 10), with a non-halogenated borate-based anion ([BOB]), have been studied at charged interfaces using sum frequency generation (SFG) spectroscopy and neutron reflectivity (NR). For all alkyl chain lengths, the SFG spectra show that the cation imidazolium ring responds to the surface charge by modifying its orientation with respect to the surface normal. In addition, the combination of SFG spectra with electrochemical NR measurements reveals that the longest alkyl chain length (n = 10) forms a bilayer structure at all charged interfaces, independent of the ring orientation. These results demonstrate the tunability of IL interfacial layers through the use of surface charge, as well as effect of the cation alkyl chain length, and provide valuable insight into the charge compensation mechanisms of ILs.

The development of lipid nanoparticle (LNP) based therapeutics for delivery of RNA has triggered the advance of new strategies for formulation, such as high throughput microfluidics for precise mixing of components into well-defined particles. In this study, we have characterised the structure of LNPs throughout the formulation process using in situ small angle x-ray scattering in the microfluidic chip, then by sampling in the subsequent dialysis process. The final formulation was investigated with small angle x-ray (SAXS) and neutron (SANS) scattering, dynamic light scattering (DLS) and cryo-TEM. The effect on structure was investigated for LNPs with a benchmark lipid composition and containing different cargos: calf thymus DNA (DNA) and two model mRNAs, polyadenylic acid (polyA) and polyuridylic acid (polyU). The LNP structure evolved during mixing in the microfluidic channel, however was only fully developed during the dialysis. The colloidal stability of the final formulation was affected by the type of incorporated nucleic acids (NAs) and decreased with the degree of base-pairing, as polyU induced extensive particle aggregation. The main NA LNP peak in the SAXS data for the final formulation were similar, with the repeat distance increasing from polyU<polyA<DNA, following the expected extent of base-pairing.

Lithium diffusion investigation of nanostructured olivine LiFePO₄ for the first time using muon spectroscopy (μSR).