KIST Europe

Disposable sensors are low-cost and easy-to-use sensing devices intended for short-term or rapid single-point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource-limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo- and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low-cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities.

ADVERTISEMENT RETURN TO ISSUEPREVReviewNEXTLatest Developments in Micro Total Analysis SystemsArun Arora†, Giuseppina Simone†, Georgette B. Salieb-Beugelaar†∥, Jung Tae Kim†, and Andreas Manz*†‡§View Author Information KIST Europe, Korea Institute of Science and Technology, Campus E71, 66123 Saarbrücken, Germany, FRIAS, Freiburg Institute for Advanced Studies, Albert-Ludwigs-Universität Freiburg, Albertstrasse 19, 79104 Freiburg, Germany, IMTEK, Institute for Microsystem Technology, University of Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg, Germany, and MESA+ Institute for Nanotechnology/Lab-on-a-Chip Group, Twente University, Building Carré, 7500 AE, Enschede, The Netherlands* To whom correspondence should be addressed. E-mail: [email protected]†KIST Europe, Korea Institute of Science and Technology.‡Albert-Ludwigs-Universität Freiburg.§University of Freiburg.∥Twente University.Cite this: Anal. Chem. 2010, 82, 12, 4830–4847Publication Date (Web):May 12, 2010Publication History Published online12 May 2010Published inissue 15 June 2010https://pubs.acs.org/doi/10.1021/ac100969khttps://doi.org/10.1021/ac100969kreview-articleACS PublicationsCopyright © 2010 American Chemical SocietyRequest reuse permissionsArticle Views10352Altmetric-Citations386LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Biotechnology,Fluid dynamics,Liquids,Microfluidic devices,Nanoparticles Get e-Alerts

The presence of emerging contaminants in the environment, such as pharmaceuticals, is a growing global concern. The excessive use of medication globally, together with the recalcitrance of pharmaceuticals in traditional wastewater treatment systems, has caused these compounds to present a severe environmental problem. In recent years, the increase in their availability, access and use of drugs has caused concentrations in water bodies to rise substantially. Considered as emerging contaminants, pharmaceuticals represent a challenge in the field of environmental remediation; therefore, alternative add-on systems for traditional wastewater treatment plants are continuously being developed to mitigate their impact and reduce their effects on the environment and human health. In this review, we describe the current status and impact of pharmaceutical compounds as emerging contaminants, focusing on their presence in water bodies, and analyzing the development of bioremediation systems, especially mycoremediation, for the removal of these pharmaceutical compounds with a special focus on fungal technologies.

The invention of the polymerase chain reaction (PCR) has caused a revolution in molecular biology, giving access to a method of amplifying deoxyribonucleic acid (DNA) molecules across several orders of magnitude. Since the first application of PCR in a microfluidic device was developed in 1998, an increasing number of researchers have continued the development of microfluidic PCR systems. In this review, we introduce recent developments in microfluidic-based space and time domain devices as well as discuss various designs integrated with multiple functions for sample preparation and detection. The development of isothermal nucleic acid amplification and digital PCR microfluidic devices within the last five years is also highlighted. Furthermore, we introduce various commercial microfluidic PCR devices.

Tin oxide (SnO2) nanowires of different diameters can be conveniently grown by combining the chemical influence of a single-molecular precursor [Sn(OtBu)4] with vapor–liquid–solid growth. Upon illumination with UV light at a wavelength of 370 nm, the nanowires exhibit interesting photoconductance, which can be modulated by tuning the wire diameter, as demonstrated for samples possessing radial dimensions in the range 50–1000 nm (see image).

Phaseguide technology gives complete control over filling and emptying of any type of microfluidic structures, independent of the chamber and channel geometry. The technique is based on a step-wise advancement of the liquid-air interface using the meniscus pinning effect. In this paper, the main effects and parameters underlying the phaseguiding principle are discussed and a demonstration is given of its potential for dead angle filling, spatially controlled phaseguide overflow and sequential phaseguide overflow, all accumulating in a passive valving approach. Phaseguides represent a new direction in microfluidic design thinking that will prove a leap forward towards more simple, flexible and reliable microfluidic systems.

The utilization of intermittent renewable energy sources needs low-cost, reliable energy storage systems in the future. Among various electrochemical energy storage systems, redox flow batteries (RFBs) are promising with merits of independent energy storage and power generation capability, localization flexibility, high efficiency, low scaling-up cost, and excellent long charge/discharge cycle life. RFBs typically use metal ions as reacting species. The most exploited types are all-vanadium RFBs (VRFBs). Here, we discuss the core components for the VRFBs, including the development and application of different types of membranes, electrode materials, and stack system. In addition, we introduce the recent progress in the discovery of novel electrolytes, such as redox-active organic compounds, polymers, and organic/inorganic suspensions. Versatile structures, tunable properties, and abundant resources of organic-based electrolytes make them suitable for cost-effective stationary applications. With the active species in solid form, suspension electrolytes are expected to provide enhanced volumetric energy densities.

ADVERTISEMENT RETURN TO ISSUEPREVReviewNEXTLatest Developments in Microfluidic Cell Biology and Analysis SystemsGeorgette B. Salieb-Beugelaar†‡, Giuseppina Simone†, Arun Arora†, Anja Philippi†, and Andreas Manz*†§∥View Author Information KIST Europe, Korea Institute of Science and Technology, Campus E71, 66123 Saarbrücken, Germany, MESA+ Institute for Nanotechnology/BIOS/Lab-on-a-Chip Group, Twente University, Building Carré, 7500 AE, Enschede, The Netherlands, FRIAS, Freiburg Institute for Advanced Studies, Albert-Ludwig-Universität Freiburg, Albertstrasse 19, 79104 Freiburg, Germany, and IMTEK, Institute for Microsystem Technology, University of Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg, Germany* To whom correspondence should be addressed. E-mail: [email protected]†KIST Europe, Korea Institute of Science and Technology.‡Twente University.§FRIAS Freiburg.∥IMTEK Freiburg.Cite this: Anal. Chem. 2010, 82, 12, 4848–4864Publication Date (Web):May 12, 2010Publication History Published online12 May 2010Published inissue 15 June 2010https://pubs.acs.org/doi/10.1021/ac1009707https://doi.org/10.1021/ac1009707review-articleACS PublicationsCopyright © 2010 American Chemical SocietyRequest reuse permissionsArticle Views7531Altmetric-Citations185LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Anatomy,Biotechnology,Cells,Electrochemical cells,Fluid dynamics Get e-Alerts

Cardiovascular disease is the main contributor to morbidity and mortality worldwide. Based on its unique chemical features, the xanthophyll carotenoid astaxanthin is being proposed as a suitable preventive and therapeutic agent in cardiovascular disease. This review focuses on recent advances in astaxanthin research relevant to cardiovascular health and disease, i.e. its direct antioxidant, indirect antioxidant, anti-inflammatory, anti-hypertensive, anti-diabetic, renoprotective, lipid-lowering and anti-atherosclerotic activities in vitro and in vivo. Disparities in the biological activities and health benefits of astaxanthin observed in vitro (strong evidence), in animals (moderate evidence), and in humans (weak evidence) and the variety of astaxanthin sources hamper efforts to establish areas of astaxanthin application in human health care. A list of knowledge gaps and experimental pitfalls is proposed to overcome some of the short-comings in astaxanthin research.

In this work, a propulsion system similar in motion to a sperm-cell is investigated. This system consists of a structure resembling a sperm-cell with a magnetic head and a flexible tail of 42 μm and 280 μm in length, respectively. The thickness, length, and width of this structure are 5.2 μm, 322 μm, and 42 μm, respectively. The magnetic head includes a 200 nm-thick cobalt-nickel layer. The cobalt-nickel layer provides a dipole moment and allows the flexible structure to align along oscillating weak (less than 5 mT) magnetic field lines, and hence generates a propulsion thrust force that overcomes the drag force. The frequency response of this system shows that the propulsion mechanism allows for swimming at an average speed of 158 ± 32 μm/s at alternating weak magnetic field of 45 Hz. In addition, we experimentally demonstrate controlled steering of the flexible structure towards reference positions.

Biodegradable metallic materials represent a potential step-change technology that may revolutionize the treatment of broken bones. Implants made with biodegradable metals are significantly stronger than their polymer counterparts and fully biodegradable in vivo, removing the need for secondary surgery or long-term complications. Here, it is shown how clinically approved Mg alloy promotes improved bone repair using an integrated state of the art fetal mouse metatarsal assay coupled with in vivo preclinical studies, second harmonic generation, secretome array analysis, perfusion bioreactor, and high-resolution 3D confocal imaging of vasculature within skeletal tissue, to reveal a vascular-mediated pro-osteogenic mechanism controlling enhanced tissue regeneration. The optimized mechanical properties and corrosion rate of the Mg alloy lead to a controlled release of metallic Mg, Ca, and Zn ions at a rate that facilitates both angiogenesis and coupled osteogenesis for better bone healing, without causing adverse effects at the implantation site. The findings from this study support ongoing development and refinement of biodegradable metal systems to act as crucial portal technologies with significant potential to improve many clinical applications.

As data visibility in factories has increased with the deployment of sensors, data-driven maintenance has become popular in industries. Machine learning has been a promising tool for fault detection, but the problem is that the amount of fault data is much less than that of normal data which causes a data imbalance. In this study, we designed a deep neural network for fault detection and diagnosis, and compared the oversampling by a generative adversarial network to standard oversampling techniques. Simulation results indicate that oversampling by the generative adversarial network performs well under the given condition and the deep neural network designed is capable of classifying the faults of an induction motor with high accuracy.

Presently, 2 to 4 days elapse between sampling at infection suspicion and result of microbial diagnostics. This delay for the identification of pathogens causes quite often a late and/or inappropriate initiation of therapy for patients suffering from infections. Bad outcome and high hospitalization costs are the consequences of these currently existing limited pathogen identification possibilities. For this reason, we aimed to apply the innovative method multi-capillary column-ion mobility spectrometry (MCC-IMS) for a fast identification of human pathogenic bacteria by determination of their characteristic volatile metabolomes. We determined volatile organic compound (VOC) patterns in headspace of 15 human pathogenic bacteria, which were grown for 24 h on Columbia blood agar plates. Besides MCC-IMS determination, we also used thermal desorption-gas chromatography-mass spectrometry measurements to confirm and evaluate obtained MCC-IMS data and if possible to assign volatile compounds to unknown MCC-IMS signals. Up to 21 specific signals have been determined by MCC-IMS for Proteus mirabilis possessing the most VOCs of all investigated strains. Of particular importance is the result that all investigated strains showed different VOC patterns by MCC-IMS using positive and negative ion mode for every single strain. Thus, the discrimination of investigated bacteria is possible by detection of their volatile organic compounds in the chosen experimental setup with the fast and cost-effective method MCC-IMS. In a hospital routine, this method could enable the identification of pathogens already after 24 h with the consequence that a specific therapy could be initiated significantly earlier.

With the increase in environmental monitoring and assessing, we are gaining insight into the extent of microplastic pollution in our environment. The threat posed by microplastics to biota could come, e.g., from leached substances. As some plastic materials have been decaying in nature for extended periods already, the toxic effects of leaching compounds need to be investigated. It is furthermore essential to understand the adverse effects of new plastic and how these effects differ from the effects elicited by old plastic material. Therefore, in the present study, the effects of exposure to leachates from new and artificial aged polycarbonate as well as new and aged polycarbonate granules on various germination parameters of Lepidium sativum were studied. Germination, root, and shoot length, as well as the calculated germination rate index as a measure for germination speed, was negatively influenced in substrate-free and substrate containing exposures. From an ecological and agricultural point of view, this implies possible yield losses with less germinating seeds, slower plant germination speed, and smaller seedlings in general.

While silica nanoparticles have enabled numerous industrial and medical applications, their toxicological safety requires further evaluation. Macrophages are the major cell population responsible for nanoparticle clearance in vivo. The prevailing macrophage phenotype largely depends on the local immune status of the host. Whereas M1-polarized macrophages are considered as pro-inflammatory macrophages involved in host defense, M2 macrophages exhibit anti-inflammatory and wound-healing properties, but also promote tumor growth. We employed different models of M1 and M2 polarization: granulocyte-macrophage colony-stimulating factor/lipopolysaccharide (LPS)/interferon (IFN)-γ was used to generate primary human M1 cells and macrophage colony-stimulating factor (M-CSF)/interleukin (IL)-10 to differentiate M2 monocyte-derived macrophages (MDM). PMA-differentiated THP-1 cells were polarized towards an M1 type by LPS/IFN-γ and towards M2 by IL-10. Uptake of fluorescent silica nanoparticles (Ø26 and 41 nm) and microparticles (Ø1.75 μm) was quantified. At the concentration used (50 μg/ml), silica nanoparticles did not influence cell viability as assessed by MTT assay. Nanoparticle uptake was enhanced in M2-polarized primary human MDM compared with M1 cells, as shown by flow cytometric and microscopic approaches. In contrast, the uptake of microparticles did not differ between M1 and M2 phenotypes. M2 polarization was also associated with increased nanoparticle uptake in the macrophage-like THP-1 cell line. In accordance, in vivo polarized M2-like primary human tumor-associated macrophages obtained from lung tumors took up more nanoparticles than M1-like alveolar macrophages isolated from the surrounding lung tissue. In summary, our data indicate that the M2 polarization of macrophages promotes nanoparticle internalization. Therefore, the phenotypical differences between macrophage subsets should be taken into consideration in future investigations on nanosafety, but might also open up therapeutic perspectives allowing to specifically target M2 polarized macrophages.

Here we report one of the smallest real-time polymerase chain reaction (PCR) systems to date with an approximate size of 100 mm × 60 mm × 33 mm. The system is an autonomous unit requiring an external 12 V power supply. Four simultaneous reactions are performed in the form of virtual reaction chambers (VRCs) where a ≈200 nL sample is covered with mineral oil and placed on a glass cover slip. Fast, 40 cycle amplification of an amplicon from the H7N9 gene was used to demonstrate the PCR performance. The standard curve slope was -3.02 ± 0.16 cycles at threshold per decade (mean ± standard deviation) corresponding to an amplification efficiency of 0.91 ± 0.05 per cycle (mean ± standard deviation). The PCR device was capable of detecting a single deoxyribonucleic acid (DNA) copy. These results further suggest that our handheld PCR device may have broad, technologically-relevant applications extending to rapid detection of infectious diseases in small clinics.

Microcystins (MCs) are the most commonly studied cyanotoxins. While these past studies have mainly focused on the toxicity of MCs, the evolutionary history of life has shown that toxicity can be considered as an assigned role to MCs. Nowadays, there is a growing interest in understanding the importance of cyanotoxins in any of the physiological processes or beyond at the ecological level. This review evaluates variously proposed intracellular and extracellular functions of MCs and how they benefit the producing cyanobacterium. However, the strain-specific and divergent laboratory and field results obtained to date have made it difficult to generalize.

In the last few years, several studies have investigated microplastics (MPs) in marine ecosystems, but data monitoring and assessing the occurrence in freshwater environments are still scarce. The present study aims to investigate the occurrence, distribution, and chemical composition of MP pollution in Vesijärvi lake and Pikku Vesijärvi pond close to the city of Lahti (Finland) in winter. Sediment, snow, and ice core samples were collected near the shore of these two aquatic systems. MPs were analysed and identified by a non-destructive method using Fourier transform infrared spectroscopy (FTIR) 2D imaging. The mean concentrations of MPs detected in sediment, snow, and ice samples were 395.5 ± 90.7 MPs/kg, 117.1 ± 18.4 MPs/L, and 7.8 ± 1.2 MPs/L, respectively. FTIR results showed the predominant abundance of microplastics, such as polyamides (up to 53.3%), polyethylene and polypropylene (up to 17.1%), and natural fragments such as cellulose (up to 45.8%) and wool (up 18.8%) in the same size range. The potential release of MPs arising from stormwaters and sport and recreational activities was evidenced.

Plastic waste is recognised as hazardous, with the risk increasing as the polymers break down in nature to secondary microplastics or even nanoplastics. The number of studies reporting on the prevalence of microplastic in every perceivable niche and bioavailable to biota is dramatically increasing. Knowledge of the ecotoxicology of microplastic is advancing as well; however, information regarding plants, specifically aquatic macrophytes, is still lacking. The present study aimed to gain more information on the ecotoxicological effects of six different polymer types as 4 mm microplastic on the morphology (germination and growth) and the physiology (catalase and glutathione S-transferase activity) of the rooted aquatic macrophyte, Nelumbo nucifera. The role of sediment was also considered by conducting all exposure both in a sediment-containing and sediment-free exposure system. Polyvinyl chloride and polyurethane exposures caused the highest inhibition of germination and growth compared to the control. However, the presence of sediment significantly decreased the adverse effects. Catalase activity was increased with exposure to polyvinyl chloride, polyurethane, and polystyrene, both in the presence and absence of sediment but more so in the sediment-free system. Glutathione S-transferase activity was significantly increased with exposure to polypropylene, polyvinyl chloride, and polyethylene terephthalate in the sediment-free system and exposure to polyethylene terephthalate and polyurethane in the absence of sediment. There was no clear correlation between the morphological and physiological effects observed. Further studies are required to understand the underlying toxicity mechanism of microplastics.

Plastic has been an environmental pollutant far longer than claimed by the first reports surfacing in 1979, meaning some plastic materials have been decaying in nature for decades. Nevertheless, the threat posed to biota is not fully understood, especially from aged microplastic. The question considered in this study was whether the adverse effects of new plastic differ from those of old plastic material. Therefore, the morphological and physiological effects on Lepidium sativum with exposure to both new and aged polycarbonate were considered against a known stressor leaching from polycarbonate with time, bisphenol-A. Exposure to new and short-term aged polycarbonate (up to 80 days) elicited the most severe effects such as germination inhibition, reduced seedling growth, decreased chlorophyll concentrations, and increased catalase activity. These adverse effects in L. sativum associated with polycarbonate exposure were reduced as a function of the ageing time applied to the polycarbonate. The chemical substances that lend new polycarbonate material its toxicity were likely leached with time during the ageing process. Based on the results obtained, temperature and humidity based artificial ageing significantly reduced the phytotoxicity of the microplastic particles.