Kunming University of Science and Technology

autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.

Wireless power transfer (WPT) using magnetic resonance is the technology which could set human free from the annoying wires. In fact, the WPT adopts the same basic theory which has already been developed for at least 30 years with the term inductive power transfer. WPT technology is developing rapidly in recent years. At kilowatts power level, the transfer distance increases from several millimeters to several hundred millimeters with a grid to load efficiency above 90%. The advances make the WPT very attractive to the electric vehicle (EV) charging applications in both stationary and dynamic charging scenarios. This paper reviewed the technologies in the WPT area applicable to EV wireless charging. By introducing WPT in EVs, the obstacles of charging time, range, and cost can be easily mitigated. Battery technology is no longer relevant in the mass market penetration of EVs. It is hoped that researchers could be encouraged by the state-of-the-art achievements, and push forward the further development of WPT as well as the expansion of EV.

BACKGROUND: , the period of mass migration for the annual Spring Festival. To contain its spread, China adopted unprecedented nationwide interventions on January 23 2020. These policies included large-scale quarantine, strict controls on travel and extensive monitoring of suspected cases. However, it is unknown whether these policies have had an impact on the epidemic. We sought to show how these control measures impacted the containment of the epidemic. METHODS: We integrated population migration data before and after January 23 and most updated COVID-19 epidemiological data into the Susceptible-Exposed-Infectious-Removed (SEIR) model to derive the epidemic curve. We also used an artificial intelligence (AI) approach, trained on the 2003 SARS data, to predict the epidemic. RESULTS: We found that the epidemic of China should peak by late February, showing gradual decline by end of April. A five-day delay in implementation would have increased epidemic size in mainland China three-fold. Lifting the Hubei quarantine would lead to a second epidemic peak in Hubei province in mid-March and extend the epidemic to late April, a result corroborated by the machine learning prediction. CONCLUSIONS: Our dynamic SEIR model was effective in predicting the COVID-19 epidemic peaks and sizes. The implementation of control measures on January 23 2020 was indispensable in reducing the eventual COVID-19 epidemic size.

capture as well as utilization were systematically discussed and compared. With our great effort, this review would be of significant importance for academic researchers for obtaining an overall understanding of the current developments and future trends of CCU. This work is bound to benefit researchers in fields relating to CCU and facilitate the progress of significant breakthroughs in both fundamental research and commercial applications to deliver perspective views for future scientific and industrial advances in CCU.

CRISPR/Cas9 is a versatile genome-editing technology that is widely used for studying the functionality of genetic elements, creating genetically modified organisms as well as preclinical research of genetic disorders. However, the high frequency of off-target activity (≥50%)-RGEN (RNA-guided endonuclease)-induced mutations at sites other than the intended on-target site-is one major concern, especially for therapeutic and clinical applications. Here, we review the basic mechanisms underlying off-target cutting in the CRISPR/Cas9 system, methods for detecting off-target mutations, and strategies for minimizing off-target cleavage. The improvement off-target specificity in the CRISPR/Cas9 system will provide solid genotype-phenotype correlations, and thus enable faithful interpretation of genome-editing data, which will certainly facilitate the basic and clinical application of this technology.

This paper proposes a double-sided LCC compensation network and its tuning method for wireless power transfer (WPT). With the proposed topology and its tuning method, the resonant frequency is irrelevant with the coupling coefficient between the two coils and is also independent of the load condition, which means that the system can work at a constant switching frequency. Analysis in frequency domain is given to show the characteristics of the proposed method. We also propose a method to tune the network to realize zero voltage switching (ZVS) for the Primary-side switches. Simulation and experimental results verified analysis and validity of the proposed compensation network and the tuning method. A wireless charging system with output power of up to 7.7 kW for electric vehicles was built, and 96% efficiency from dc power source to battery load is achieved.

Abstract The COVID-19 pandemic is impacting human activities, and in turn energy use and carbon dioxide (CO 2 ) emissions. Here we present daily estimates of country-level CO 2 emissions for different sectors based on near-real-time activity data. The key result is an abrupt 8.8% decrease in global CO 2 emissions (−1551 Mt CO 2 ) in the first half of 2020 compared to the same period in 2019. The magnitude of this decrease is larger than during previous economic downturns or World War II. The timing of emissions decreases corresponds to lockdown measures in each country. By July 1st, the pandemic’s effects on global emissions diminished as lockdown restrictions relaxed and some economic activities restarted, especially in China and several European countries, but substantial differences persist between countries, with continuing emission declines in the U.S. where coronavirus cases are still increasing substantially.

International audience

Ray Ming, Robert Paull, Qingyi Yu and colleagues report the genome sequences of two cultivated pineapple varieties and one wild pineapple relative. Their analysis supports the use of the pineapple as a reference genome for monocot comparative genomics and provides insight into the evolution of crassulacean acid metabolism photosynthesis. Pineapple (Ananas comosus (L.) Merr.) is the most economically valuable crop possessing crassulacean acid metabolism (CAM), a photosynthetic carbon assimilation pathway with high water-use efficiency, and the second most important tropical fruit. We sequenced the genomes of pineapple varieties F153 and MD2 and a wild pineapple relative, Ananas bracteatus accession CB5. The pineapple genome has one fewer ancient whole-genome duplication event than sequenced grass genomes and a conserved karyotype with seven chromosomes from before the ρ duplication event. The pineapple lineage has transitioned from C3 photosynthesis to CAM, with CAM-related genes exhibiting a diel expression pattern in photosynthetic tissues. CAM pathway genes were enriched with cis-regulatory elements associated with the regulation of circadian clock genes, providing the first cis-regulatory link between CAM and circadian clock regulation. Pineapple CAM photosynthesis evolved by the reconfiguration of pathways in C3 plants, through the regulatory neofunctionalization of preexisting genes and not through the acquisition of neofunctionalized genes via whole-genome or tandem gene duplication.

In this study, yolk–shell Ni@SnO2 composites with a designable interspace were successfully prepared by the simple acid etching hydrothermal method. The Ni@void@SnO2 composites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results indicate that interspaces exist between the Ni cores and SnO2 shells. Moreover, the void can be adjusted by controlling the hydrothermal reaction time. The unique yolk–shell Ni@void@SnO2 composites show outstanding electromagnetic wave absorption properties. A minimum reflection loss (RLmin) of −50.2 dB was obtained at 17.4 GHz with absorber thickness of 1.5 mm. In addition, considering the absorber thickness, minimal reflection loss, and effective bandwidth, a novel method to judge the effective microwave absorption properties is proposed. On the basis of this method, the best microwave absorption properties were obtained with a 1.7 mm thick absorber layer (RLmin= −29.7 dB, bandwidth of 4.8 GHz). The outstanding electromagnetic wave absorption properties stem from the unique yolk–shell structure. These yolk–shell structures can tune the dielectric properties of the Ni@air@SnO2 composite to achieve good impedance matching. Moreover, the designable interspace can induce interfacial polarization, multiple reflections, and microwave plasma.

Abstract Land surface temperature (LST) is a crucial parameter that reflects land–atmosphere interaction and has thus attracted wide interest from geoscientists. Owing to the rapid development of Earth observation technologies, remotely sensed LST is playing an increasingly essential role in various fields. This review aims to summarize the progress in LST estimation algorithms and accelerate its further applications. Thus, we briefly review the most‐used thermal infrared (TIR) LST estimation algorithms. More importantly, this review provides a comprehensive collection of the widely used TIR‐based LST products and offers important insights into the uncertainties in these products with respect to different land cover conditions via a systematic intercomparison analysis of several representative products. In addition to the discussion on product accuracy, we address problems related to the spatial discontinuity, spatiotemporal incomparability, and short time span of current LST products by introducing the most effective methods. With the aim of overcoming these challenges in available LST products, much progress has been made in developing spatiotemporal seamless LST data, which significantly promotes the successful applications of these products in the field of surface evapotranspiration and soil moisture estimation, agriculture drought monitoring, thermal environment monitoring, thermal anomaly monitoring, and climate change. Overall, this review encompasses the most recent advances in TIR‐based LST and the state‐of‐the‐art of applications of LST products at various spatial and temporal scales, identifies critical further research needs and directions to advance and optimize retrieval methods, and promotes the application of LST to improve the understanding of surface thermal dynamics and exchanges.

Antibiotic resistance (ABR) is a growing public health concern worldwide, and it is now regarded as a critical One Health issue. One Health's interconnected domains contribute to the emergence, evolution, and spread of antibiotic-resistant microorganisms on a local and global scale, which is a significant risk factor for global health. The persistence and spread of resistant microbial species, and the association of determinants at the human-animal-environment interface can alter microbial genomes, resulting in resistant superbugs in various niches. ABR is motivated by a well-established link between three domains: human, animal, and environmental health. As a result, addressing ABR through the One Health approach makes sense. Several countries have implemented national action plans based on the One Health approach to combat antibiotic-resistant microbes, following the Tripartite's Commitment Food and Agriculture Organization (FAO)-World Organization for Animal Health (OIE)-World Health Organization (WHO) guidelines. The ABR has been identified as a global health concern, and efforts are being made to mitigate this global health threat. To summarize, global interdisciplinary and unified approaches based on One Health principles are required to limit the ABR dissemination cycle, raise awareness and education about antibiotic use, and promote policy, advocacy, and antimicrobial stewardship.

Abstract Cancer-associated fibroblasts (CAFs) are the predominant components of the tumor microenvironment (TME) and influence cancer hallmarks, but without systematic investigation on their ubiquitous characteristics across different cancer types. Here, we perform pan-cancer analysis on 226 samples across 10 solid cancer types to profile the TME at single-cell resolution, illustrating the commonalities/plasticity of heterogenous CAFs. Activation trajectory of the major CAF types is divided into three states, exhibiting distinct interactions with other cell components, and relating to prognosis of immunotherapy. Moreover, minor CAF components represent the alternative origin from other TME components (e.g., endothelia and macrophages). Particularly, the ubiquitous presentation of endothelial-to-mesenchymal transition CAF, which may interact with proximal SPP 1 + tumor-associated macrophages, is implicated in endothelial-to-mesenchymal transition and survival stratifications. Our study comprehensively profiles the shared characteristics and dynamics of CAFs, and highlight their heterogeneity and plasticity across different cancer types. Browser of integrated pan-cancer single-cell information is available at https://gist-fgl.github.io/sc-caf-atlas/ .

Abstract The synergistic interaction among different components in complex catalysts is one of the crucial factors in determining catalytic performance. Here we report the interactions among the three components in controlling the catalytic performance of Cu–ZnO–ZrO 2 (CZZ) catalyst for CO 2 hydrogenation to methanol. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the activity test pressure (3 MPa) reveal that the CO 2 hydrogenation to methanol on the CZZ catalysts follows the formate pathway. Density functional theory (DFT) calculations agree with the in situ DRIFTS measurements, showing that the ZnO–ZrO 2 interfaces are the active sites for CO 2 adsorption and conversion, while the presence of metallic Cu is also necessary to facilitate H 2 dissociation and to provide hydrogen resource. The combined experiment and DFT results reveal that tuning the interaction between ZnO and ZrO 2 can be considered as another important factor for designing high performance catalysts for methanol generation from CO 2 .

Severe plastic deformation (SPD) is effective in producing bulk ultrafine-grained and nanostructured materials with large densities of lattice defects. This field, also known as NanoSPD, experienced a significant progress within the past two decades. Beside classic SPD methods such as high-pressure torsion, equal-channel angular pressing, accumulative roll-bonding, twist extrusion, and multi-directional forging, various continuous techniques were introduced to produce upscaled samples. Moreover, numerous alloys, glasses, semiconductors, ceramics, polymers, and their composites were processed. The SPD methods were used to synthesize new materials or to stabilize metastable phases with advanced mechanical and functional properties. High strength combined with high ductility, low/room-temperature superplasticity, creep resistance, hydrogen storage, photocatalytic hydrogen production, photocatalytic CO2 conversion, superconductivity, thermoelectric performance, radiation resistance, corrosion resistance, and biocompatibility are some highlighted properties of SPD-processed materials. This article reviews recent advances in the NanoSPD field and provides a brief history regarding its progress from the ancient times to modernity. Abbreviations: ARB: Accumulative Roll-Bonding; BCC: Body-Centered Cubic; DAC: Diamond Anvil Cell; EBSD: Electron Backscatter Diffraction; ECAP: Equal-Channel Angular Pressing (Extrusion); FCC: Face-Centered Cubic; FEM: Finite Element Method; FSP: Friction Stir Processing; HCP: Hexagonal Close-Packed; HPT: High-Pressure Torsion; HPTT: High-Pressure Tube Twisting; MDF: Multi-Directional (-Axial) Forging; NanoSPD: Nanomaterials by Severe Plastic Deformation; SDAC: Shear (Rotational) Diamond Anvil Cell; SEM: Scanning Electron Microscopy; SMAT: Surface Mechanical Attrition Treatment; SPD: Severe Plastic Deformation; TE: Twist Extrusion; TEM: Transmission Electron Microscopy; UFG: Ultrafine Grained. © 2022 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.

The original Hilbert's 16th problem can be split into four parts consisting of Problems A–D. In this paper, the progress of study on Hilbert's 16th problem is presented, and the relationship between Hilbert's 16th problem and bifurcations of planar vector fields is discussed. The material is presented in eight sections. Section 1: Introduction: what is Hilbert's 16th problem? Section 2: The first part of Hilbert's 16th problem. Section 3: The second part of Hilbert's 16th problem: introduction. Section 4: Focal values, saddle values and finite cyclicity in a fine focus, closed orbit and homoclinic loop. Section 5: Finiteness problem. Section 6: The weakened Hilbert's 16th problem. Section 7: Global and local bifurcations of Z q –equivariant vector fields. Section 8: The rate of growth of Hilbert number H(n) with n.

Facilitated by redox catalysts capable of catalytic reactions and reactive separation, chemical looping offers exciting opportunities for intensified chemical production.

Antimicrobial peptides (AMPs) are regarded as a new generation of antibiotics. Besides antimicrobial activity, AMPs also have antibiofilm, immune-regulatory, and other activities. Exploring the mechanism of action of AMPs may help in the modification and development of AMPs. Many studies were conducted on the mechanism of AMPs. The present review mainly summarizes the research status on the antimicrobial, anti-inflammatory, and antibiofilm properties of AMPs. This study not only describes the mechanism of cell wall action and membrane-targeting action but also includes the transmembrane mechanism of intracellular action and intracellular action targets. It also discusses the dual mechanism of action reported by a large number of investigations. Antibiofilm and anti-inflammatory mechanisms were described based on the formation of biofilms and inflammation. This study aims to provide a comprehensive review of the multiple activities and coordination of AMPs in vivo, and to fully understand AMPs to realize their therapeutic prospect.

This is a continuity of a series of taxonomic papers where materials are examined, described and novel combinations are proposed where necessary to improve our traditional species concepts and provide updates on their classification. In addition to extensive morphological descriptions and appropriate asexual and sexual connections, DNA sequence data are also analysed from concatenated datasets (rDNA, TEF-α, RBP2 and β-Tubulin) to infer phylogenetic relationships and substantiate systematic position of taxa within appropriate ranks. Wherever new species or combinations are being proposed, we apply an integrative approach (morphological and molecular data as well as ecological features wherever applicable). Notes on 125 fungal taxa are compiled in this paper, including eight new genera, 101 new species, two new combinations, one neotype, four reference specimens, new host or distribution records for eight species and one alternative morphs. The new genera introduced in this paper are Alloarthopyrenia, Arundellina, Camarosporioides, Neomassaria, Neomassarina, Neotruncatella, Paracapsulospora and Pseudophaeosphaeria. The new species are Alfaria spartii, Alloarthopyrenia italica, Anthostomella ravenna, An. thailandica, Arthrinium paraphaeospermum, Arundellina typhae, Aspergillus koreanus, Asterina cynometrae, Bertiella ellipsoidea, Blastophorum aquaticum, Cainia globosa, Camarosporioides phragmitis, Ceramothyrium menglunense, Chaetosphaeronema achilleae, Chlamydotubeufia helicospora, Ciliochorella phanericola, Clavulinopsis aurantiaca, Colletotrichum insertae, Comoclathris italica, Coronophora myricoides, Cortinarius fulvescentoideus, Co. nymphatus, Co. pseudobulliardioides, Co. tenuifulvescens, Cunninghamella gigacellularis, Cyathus pyristriatus, Cytospora cotini, Dematiopleospora alliariae, De. cirsii, Diaporthe aseana, Di. garethjonesii, Distoseptispora multiseptata, Dis. tectonae, Dis. tectonigena, Dothiora buxi, Emericellopsis persica, Gloniopsis calami, Helicoma guttulatum, Helvella floriforma, H. oblongispora, Hermatomyces subiculosa, Juncaceicola italica, Lactarius dirkii, Lentithecium unicellulare, Le. voraginesporum, Leptosphaeria cirsii, Leptosphaeria irregularis, Leptospora galii, Le. thailandica, Lindgomyces pseudomadisonensis, Lophiotrema bambusae, Lo. fallopiae, Meliola citri-maximae, Minimelanolocus submersus, Montagnula cirsii, Mortierella fluviae, Muriphaeosphaeria ambrosiae, Neodidymelliopsis ranunculi, Neomassaria fabacearum, Neomassarina thailandica, Neomicrosphaeropsis cytisi, Neo. cytisinus, Neo. minima, Neopestalotiopsis cocoës, Neopestalotiopsis musae, Neoroussoella lenispora, Neotorula submersa, Neotruncatella endophytica, Nodulosphaeria italica, Occultibambusa aquatica, Oc. chiangraiensis, Ophiocordyceps hemisphaerica, Op. lacrimoidis, Paracapsulospora metroxyli, Pestalotiopsis sequoiae, Peziza fruticosa, Pleurotrema thailandica, Poaceicola arundinis, Polyporus mangshanensis, Pseudocoleophoma typhicola, Pseudodictyosporium thailandica, Pseudophaeosphaeria rubi, Purpureocillium sodanum, Ramariopsis atlantica, Rhodocybe griseoaurantia, Rh. indica, Rh. luteobrunnea, Russula indoalba, Ru. pseudoamoenicolor, Sporidesmium aquaticivaginatum, Sp. olivaceoconidium, Sp. pyriformatum, Stagonospora forlicesenensis, Stagonosporopsis centaureae, Terriera thailandica, Tremateia arundicola, Tr. guiyangensis, Trichomerium bambusae, Tubeufia hyalospora, Tu. roseohelicospora and Wojnowicia italica. New combinations are given for Hermatomyces mirum and Pallidocercospora thailandica. A neotype is proposed for Cortinarius fulvescens. Reference specimens are given for Aquaphila albicans, Leptospora rubella, Platychora ulmi and Meliola pseudosasae, while new host or distribution records are provided for Diaporthe eres, Di. siamensis, Di. foeniculina, Dothiorella iranica, Do. sarmentorum, Do. vidmadera, Helvella tinta and Vaginatispora fuckelii, with full taxonomic details. An asexual state is also reported for the first time in Neoacanthostigma septoconstrictum. This paper contributes to a more comprehensive update and improved identification of many ascomycetes and basiodiomycetes.

This paper proposes an adaptive control for a class of nonlinear mechanisms with guaranteed transient and steady-state performance. A performance function characterizing the convergence rate, maximum overshoot, and steady-state error is used for the output error transformation, such that stabilizing the transformed system is sufficient to achieve the tracking control of the original system with a priori prescribed performance. A continuously differentiable friction model is adopted to account for the friction nonlinearities, for which primary model parameters are online updated. A novel high-order neural network with only a scalar weight is developed to approximate unknown nonlinearities and to dramatically diminish the computational costs. Comparative experiments on a turntable servo system are included to verify the reliability and effectiveness.