National Environmental Engineering Research Institute

India faces major environmental challenges associated with waste generation and inadequate waste collection, transport, treatment and disposal. Current systems in India cannot cope with the volumes of waste generated by an increasing urban population, and this impacts on the environment and public health. The challenges and barriers are significant, but so are the opportunities. This paper reports on an international seminar on 'Sustainable solid waste management for cities: opportunities in South Asian Association for Regional Cooperation (SAARC) countries' organized by the Council of Scientific and Industrial Research-National Environmental Engineering Research Institute and the Royal Society. A priority is to move from reliance on waste dumps that offer no environmental protection, to waste management systems that retain useful resources within the economy. Waste segregation at source and use of specialized waste processing facilities to separate recyclable materials has a key role. Disposal of residual waste after extraction of material resources needs engineered landfill sites and/or investment in waste-to-energy facilities. The potential for energy generation from landfill via methane extraction or thermal treatment is a major opportunity, but a key barrier is the shortage of qualified engineers and environmental professionals with the experience to deliver improved waste management systems in India.

Dyes have a long history and constitute an important component in our daily lives. The dye industry began by using natural plant and insect sources, and then rapidly turned to synthetic manufacturi...

ADVERTISEMENT RETURN TO ISSUEPREVReviewNEXTFluoride in Drinking Water and Defluoridation of WaterSneha Jagtap†, Mahesh Kumar Yenkie‡, Nitin Labhsetwar†, and Sadhana Rayalu*†View Author Information† National Environmental Engineering Research Institute, Nehru Marg, Nagpur 440 020, India‡ Laxminarayan Institute of Technology, Nagpur 440033, India*Dr. (Mrs.) S. S. Rayalu, Scientist & Head Environmental Materials Unit, National Environmental Engineering Research Institute, Nehru Marg, Nagpur 440 020, India. Telephone: +917122247828. Fax: +917122247828. E-mail: [email protected]Cite this: Chem. Rev. 2012, 112, 4, 2454–2466Publication Date (Web):February 3, 2012Publication History Received27 July 2011Published online3 February 2012Published inissue 11 April 2012https://pubs.acs.org/doi/10.1021/cr2002855https://doi.org/10.1021/cr2002855review-articleACS PublicationsCopyright © 2012 American Chemical SocietyRequest reuse permissionsArticle Views10904Altmetric-Citations559LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Adsorption,Anions,Drinking water,Ions,Oxides Get e-Alerts

Bioremediation refers to cost-effective and environment-friendly method for converting the toxic, recalcitrant pollutants into environmentally benign products through the action of various biological treatments. Fungi play a major role in bioremediation owing to their robust morphology and diverse metabolic capacity. The review focuses on different fungal groups from a variety of habitats with their role in bioremediation of different toxic and recalcitrant compounds; persistent organic pollutants, textile dyes, effluents from textile, bleached kraft pulp, leather tanning industries, petroleum, polyaromatic hydrocarbons, pharmaceuticals and personal care products, and pesticides. Bioremediation of toxic organics by fungi is the most sustainable and green route for cleanup of contaminated sites and we discuss the multiple modes employed by fungi for detoxification of different toxic and recalcitrant compounds including prominent fungal enzymes viz., catalases, laccases, peroxidases and cyrochrome P450 monooxygeneses. We have also discussed the recent advances in enzyme engineering and genomics and research being carried out to trace the less understood bioremediation pathways.

BACKGROUND: Thrombolytic drugs are widely used for the management of cerebral venous sinus thrombosis patients. Several in vitro models have been developed to study clot lytic activity of thrombolytic drugs, but all of these have certain limitations. There is need of an appropriate model to check the clot lytic efficacy of thrombolytic drugs. In the present study, an attempt has been made to design and develop a new model system to study clot lysis in a simplified and easy way using a thrombolytic drug, streptokinase. METHODS: Whole blood from healthy individuals (n = 20) was allowed to form clots in a pre-weighed sterile microcentrifuge tubes; serum was removed and clot was weighed. After lysis by streptokinase fluid was removed and remnants of clot were again weighed along with the tube. Percentage of Clot lysis was calculated on the basis of the weight difference of microcentrifuge tubes obtained before and after clot lysis. RESULTS: There was a significant percentage of clot lysis observed when streptokinase was used. On the other hand with water (negative control), minimal (2.5%) clot lysis was observed. There was a significant difference between clot lysis done by streptokinase and water. CONCLUSION: Our study could be a rapid and effective methodology to study clot-lytic effect of newly developed drugs as well as known drugs.

Abstract With diminishing oil supplies and growing political instability in oil‐producing nations, the world is facing a major energy threat which needs to be solved by virtue of alternative energy sources. Bioethanol has received considerable attention in the transportation sector because of its utility as an octane booster, fuel additive, and even as neat fuel. Brazil and the USA have been producing ethanol on a large scale from sugarcane and corn, respectively. However, due to their primary utility as food and feed, these crops cannot meet the global demand for ethanol production as an alternative transportation fuel. Lignocellulosic biomass is projected as a virtually eternal raw material for fuel ethanol production. The main bottleneck so far has been the technology concerns, which do not support cost‐effective and competitive production of lignocellulosic bioethanol. This review sheds light on some of the practical approaches that can be adopted to make the production of lignocellulosic bioethanol economically attractive. These include the use of cheaper substrates, cost‐effective pre‐treatment techniques, overproducing and recombinant strains for maximized ethanol tolerance and yields, improved recovery processes, efficient bioprocess integration, economic exploitation of side products, and energy and waste minimization. An integrated and dedicated approach can help in realizing large‐scale commercial production of lignocellulosic bioethanol, and can contribute toward a cleaner and more energy efficient world. Copyright © 2009 Society of Chemical Industry and John Wiley & Sons, Ltd

In the recent years, nanotechnology has emerged as a state-of-the-art and cutting edge technology with multifarious applications in a wide array of fields. It is a very broad area comprising of nanomaterials, nanotools, and nanodevices. Amongst nanomaterials, majority of the research has mainly focused on nanoparticles as they can be easily prepared and manipulated. Physical and chemical methods are conventionally used for the synthesis of nanoparticles; however, due to several limitations of these methods, research focus has recently shifted towards the development of clean and eco-friendly synthesis protocols. Magnetic nanoparticles constitute an important class of inorganic nanoparticles, which find applications in different areas by virtue of their several unique properties. Nevertheless, in comparison with biological synthesis protocols for noble metal nanoparticles, limited study has been carried out with respect to biological synthesis of magnetic nanoparticles. This review focuses on various studies outlining the novel routes for biosynthesis of these nanoparticles by plant resources along with outlining the future scope of work in this area.

Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.

Emergence of antibiotic and multi-drug resistant pathogenic bacteria has created the need for new drugs and drug targets. During pathogenesis bacteria release signals which regulate virulence and pathogenicity related genes. Such bacteria co-ordinate their virulent behaviour in a cell density dependent phenomenon termed as quorum sensing (QS). In contrast, microbes interfere with QS system by quenching the signals, termed quorum quenching (QQ). As a consequence of disrupted QS, pathogens become susceptible to antibiotics and drugs. In this article, the biodiversity of organisms with potential to quench QS signals and the use of QQ molecules as antibacterial drugs have been reviewed.

Microorganisms maintain the biosphere by catalyzing biogeochemical processes, including biodegradation of organic chemical pollutants. Yet seldom have the responsible agents and their respective genes been identified. Here we used field-based stable isotopic probing (SIP) to discover a group of bacteria responsible for in situ metabolism of an environmental pollutant, naphthalene. We released 13C-labeled naphthalene in a contaminated study site to trace the flow of pollutant carbon into the naturally occurring microbial community. Using GC/MS, molecular biology, and classical microbiological techniques we documented 13CO2 evolution (2.3% of the dose in 8 h), created a library of 16S rRNA gene clones from 13C labeled sediment DNA, identified a taxonomic cluster (92 of 95 clones) from the microbial community involved in metabolism of the added naphthalene, and isolated a previously undescribed bacterium (strain CJ2) from site sediment whose 16S rRNA gene matched that of the dominant member (48%) of the clone library. Strain CJ2 is a beta proteobacterium closely related to Polaromonas vacuolata. Moreover, strain CJ2 hosts the sequence of a naphthalene dioxygenase gene, prevalent in site sediment, detected before only in environmental DNA. This investigative strategy may have general application for elucidating the bases of many biogeochemical processes, hence for advancing knowledge and management of ecological and industrial systems that rely on microorganisms.

The investigation of a groundwater resource impacted with Cr(VI) requires analysis of groundwater for Cr(VI) and total Cr. Most notably, Cr(III) is considered to be a trace element essential for the proper functioning of living organisms, whereas Cr(VI) may exert toxic effects on biological systems. The nature and behavior of various Cr forms found in wastewater can be quite different from those present in natural waters because of altered physicochemical conditions of the eluents originating from various industrial sources. The chromium content in surface waters is usually at the low μgL−1 level, typically between 0.3 and 6 μgL−1. Speciation of Cr(III) and Cr(VI) has been a longstanding analytical challenge. The selective determination of Cr(VI) is of particular importance because of its toxicity. Due to the importance of Cr(III) and Cr(VI), the accurate and sensitive determinations of these ions are the important part of the analytical chemistry. Chromium speciation is very important in different branches of natural sciences. Therefore, total chromium measurements alone cannot determine the actual environmental impact. This requires speciation techniques with sufficient selectivity and high sensitivity. Speciation of trace levels of chromium in water sample requires high-capacity separation and high sensitivity detection. The authors present a review of presently available analytical possibilities of chromium speciation investigations in water samples.

For about the past eight decades, high concentrations of naturally occurring fluoride have been detected in groundwater in different parts of India. The chronic consumption of fluoride in high concentrations is recognized to cause dental and skeletal fluorosis. We have used the random forest machine-learning algorithm to model a data set of 12 600 groundwater fluoride concentrations from throughout India along with spatially continuous predictor variables of predominantly geology, climate, and soil parameters. Despite only surface parameters being available to describe a subsurface phenomenon, this has produced a highly accurate prediction map of fluoride concentrations exceeding 1.5 mg/L at 1 km resolution throughout the country. The most affected areas are the northwestern states/territories of Delhi, Gujarat, Haryana, Punjab, and Rajasthan and the southern states of Andhra Pradesh, Karnataka, Tamil Nadu, and Telangana. The total number of people at risk of fluorosis due to fluoride in groundwater is predicted to be around 120 million, or 9% of the population. This number is based on rural populations and accounts for average rates of groundwater consumption from nonmanaged sources. The new fluoride hazard and risk maps can be used by authorities in conjunction with detailed groundwater utilization information to prioritize areas in need of mitigation measures.

Particulate plastic fragments (micro and nano-plastics) in aquatic environments provide abundant solid substrates, which serve as an important habitat for a variety of microorganisms. Surfaces of microplastics (MPs) exhibit hydrophobicity that facilitate the adsorption of dissolved organic carbon (DOC) in the aquatic environment. Furthermore, MPs act as substrata, as well as a carbon source including the readily bioavailable DOC, which promote the formation of microbial biofilms. These biofilms have varied metabolic actions that govern the subsequent succession of micro- and meso-organisms habitation of MPs. The assemblage of ecosystems colonising the plastic environment is often referred to as the “plastisphere”. Polymer type, environmental conditions, including nutrient status, salinity, and season, affect the microbial composition of the biofilm. Microbial habitation accelerated by biofilm formation on particulate plastics enables the movement of microorganisms, especially in the aquatic environment, and impacts the transport and toxicity of contaminants associated with these particulate plastic fragments. This review paper describes the processes of microbial habitation and subsequent biofilm formation, the factors affecting biofilm formation, and the implications of biofilm formation on the mobility of microorganisms, degradation of MPs, and the bioavailability of contaminants associated with MPs.

BACKGROUND: Atherothrombotic diseases such as myocardial or cerebral infarction are serious consequences of the thrombus formed in blood vessels. Thrombolytic agents are used to dissolve the already formed clots in the blood vessels; however, these drugs have certain limitations which cause serious and sometimes fatal consequences. Herbal preparations have been used since ancient times for the treatment of several diseases. Herbs and their components possessing antithrombotic activity have been reported before; however, herbs that could be used for thrombolysis has not been reported so far. This study's aim was to investigate whether herbal preparations (aqueous extract) possess thrombolytic activity or not. METHODS: An in vitro thrombolytic model was used to check the clot lysis effect of six aqueous herbal extracts viz., Tinospora cordifolia, Rubia cordifolia, Hemidesmus indicus, Glycyrrhiza glabra Linn, Fagonia Arabica and Bacopa monnieri Linn along with Streptokinase as a positive control and water as a negative control. RESULTS: Using an in vitro thrombolytic model, Tinospora cordifolia, Rubia cordifolia, Hemidesmus indicus, Glycyrrhiza glabra Linn, Fagonia Arabica and Bacopa monnieri Linn showed 19.3%, 14.5%, 20.3%, 17.8%, 75.6% and 41.8% clot lysis respectively . Among the herbs studied Fagonia arabica showed significant % of clot lysis (75.6%) with reference to Streptokinase (86.2%). CONCLUSION: Through our study it was found that Dhamasa possesses thrombolytic properties that could lyse blood clots in vitro; however, in vivo clot dissolving properties and active component(s) of Dhamasa for clot lysis are yet to be discovered. Once found Dhamasa could be incorporated as a thrombolytic agent for the improvement of patients suffering from Atherothrombotic diseases.

The field of nanotechnology is the most active area of research in modern materials science. Though there are many chemical as well as physical methods, green synthesis of nanomaterials is the most emerging method of synthesis. We report the synthesis of antibacterial silver nanoparticles (AgNPs) using leaf broth of medicinal herb, Ocimum sanctum (Tulsi). The synthesized AgNPs have been characterized by UV‐Vis spectroscopy, transmission electron microscopy (TEM), and X‐ray diffractometry. The mean particle of synthesized NPs was found to be 18 nm, as confirmed by TEM. The qualitative assessment of reducing potential of leaf extract has also been carried out which indicated presence of significant amount of reducing entities. FTIR analysis revealed that the AgNPs were stabilized by eugenols, terpenes, and other aromatic compounds present in the extract. Such AgNPs stabilized by Tulsi leaf extract were found to have enhanced antimicrobial activity against well‐known pathogenic strains, namely Staphylococcus aureus and E. coli.

Perovskites are mixed-metal oxides that are attracting much scientific and application interest owing to their low price, adaptability, and thermal stability, which often depend on bulk and surface characteristics. These materials have been extensively explored for their catalytic, electrical, magnetic, and optical properties. They are promising candidates for the photocatalytic splitting of water and have also been extensively studied for environmental catalysis applications. Oxygen and cation non-stoichiometry can be tailored in a large number of perovskite compositions to achieve the desired catalytic activity, including multifunctional catalytic properties. Despite the extensive uses, the commercial success for this class of perovskite-based catalytic materials has not been achieved for vehicle exhaust emission control or for many other environmental applications. With recent advances in synthesis techniques, including the preparation of supported perovskites, and increasing understanding of promoted substitute perovskite-type materials, there is a growing interest in applied studies of perovskitetype catalytic materials. We have studied a number of perovskites based on Co, Mn, Ru, and Fe and their substituted compositions for their catalytic activity in terms of diesel soot oxidation, three-way catalysis, N 2 O decomposition, low-temperature CO oxidation, oxidation of volatile organic compounds, etc. The enhanced catalytic activity of these materials is attributed mainly to their altered redox properties, the promotional effect of co-ions, and the increased exposure of catalytically active transition metals in certain preparations. The recent lowering of sulfur content in fuel and concerns over the cost and availability of precious metals are responsible for renewed interest in perovskite-type catalysts for environmental applications.

The role of extracellular polymeric substances (EPS) produced by the heavy metal-resistant strain of Azotobacter spp. in restricting the uptake of cadmium (Cd) and chromium (Cr) by wheat plants cultivated in soils contaminated with the respective heavy metals has been demonstrated. A heavy metal-resistant strain of Azotobacter spp. was isolated and identified. Minimum inhibitory concentrations (MIC) of Cd2+ and CrO4(2-) were determined to be 20 and 10 mg L(-1), respectively. Under in vitro conditions, the EPS produced by the strain could bind 15.17 +/- 0.58 mg g(-1) of Cd2+ and 21.9 +/- 0.08 mg g(-1) of CrO4(2-). Fourier transform infrared spectra of the EPS revealed the presence of functional groups like carboxyl (-COOH) and hydroxyl (-OH), primarily involved in metal ion binding. Under pot culture experiments, the isolated strain of Azotobacter was added to the metal-contaminated soils in the form of free cells and immobilized cells. The total Azotobacter count and plant metal concentrations under different treatments showed a negative coefficient between the Azotobacter population and plant Cd (-0.496) and Cr (-0.455). Thus it could be inferred that Azotobacter spp. is involved in metal ion complexation either through EPS or through cell wall lipopolysaccharides (LPS).

Environmental problems associated with volatile organic compounds (VOCs) in the atmosphere have provided the driving force for sustained fundamental and applied research in the area of environmental remediation. Conventional methods currently used to treat VOCs include incineration, condensation, adsorption, and absorption. Incineration and condensation are cost-effective only for moderate to high VOC concentrations. Adsorption and absorption do not destroy VOCs but simply transfer them to another medium. The humid gas stream can plug the condenser and can fill up the adsorption site of the adsorbent. However, none of these methods are cost-effective for the treatment of gas streams with low to moderate concentration and having large numbers of compounds, as the recovery and reuse of the compounds is not economically feasible. A host of alternative remediation technologies, which offer a number of advantages over conventional technologies, are emerging. These include treatment of VOCs with spark-generated carbon aerosol particles, negative air ions treatment, treatment using mesoporous chromium oxide and silica fiber matrix, electrical discharge treatment, electron beam bombardment, and ultraviolet (UV) photooxidation mediated by heterogeneous photocatalyst particles. This review discusses these emerging technologies against the backdrop of conventional approaches for VOC treatment.

The feasibility of using surfactant-modified zeolite (SMZ) as a carrier for fertilizer and for slow release of phosphorus (P) was investigated. Zeolite-A was modified by using hexadecyltrimethylammonium bromide, a cationic surfactant, to modify its surface to increase its capacity to retain anion, namely, phosphate (PO4(3-)). SMZ was thoroughly characterized using X-ray diffraction, Fourier transform infrared, and scanning electron microscopy to study the effect of surfactant modification. Zeolite-A and SMZ were then subjected to P loading by treating them with fertilizer (KH2PO4). It was observed that the P loading on SMZ increased by a factor of 4.9 as compared to the unmodified zeolite-A. A comparative study of the release of P from fertilizer-loaded unmodified zeolite-A and SMZ and from solid KH2PO4 was performed using the constant flow percolation reactor. The results show that the P supply from fertilizer-loaded SMZ was available even after 1080 h of continuous percolation, whereas P from KH2PO4 was exhausted within 264 h. The results indicate that SMZ is a good sorbent for PO4(3-), and a slow release of P was achievable. These properties suggest that SMZ has a great potential as the fertilizer carrier for slow release of P.

BACKGROUND: In May 2006, there was a large Chikungunya virus infection (CHIKV) outbreak in the Nagpur district of Maharashtra, a province in western India. Usually, CHIKV is a self-limiting febrile illness. However, neurological complications have been described infrequently. AIM: To study the clinical characteristics of various neurological complications associated with CHIKV infections. MATERIALS AND METHODS: Patients with neurological complications following CHIKV infection during the outbreak were the subjects of the study. On the basis of clinical features and investigative findings, patients were grouped into various neurological syndromes: Encephalitis, myelopathy, peripheral neuropathy, myeloneuropathy, and myopathy. Cerebrospinal fluid (CSF) samples were also collected for biochemical and serological studies. RESULTS: Of the 300 patients with CHIKV infection seen during the study period, June-December 2006, 49 (16.3%) [M : F: 42:7] had neurological complications. The neurological complications included: Encephalitis (27, 55%), myelopathy (7, 14% ), peripheral neuropathy (7, 14%), myeloneuropathy (7, 14%), and myopathy (1, 2%). Reverse Transcriptase polymerase chain reaction (RT-PCR) and real-time PCR was positive in the CSF in 16% and 18%, respectively. CONCLUSION: Recent CHIKV infection was associated with various neurological complications, suggesting neurotropic nature of the virus. The outcome of the neurological complications is likely to be good.