National Nanotechnology Research Center

Recent developments in the synthesis of electrospun nanomaterials and their potential prospects in energy and environmental applications are discussed in detail.

Heavy C-doping can effectively enhance visible-light absorption yet exhibited lower visible-light-responsive photocatalytic activity due to significant recombination of photogenerated charge carriers caused by C-dopant and oxygen vacancies.

Although numerous mesoporous silica nanoparticle (MSN) drug carriers and theranostic agents with various surface functionalities have been designed in the last decade, their biocompatibility remains a matter of intensive debate. Here, we systematically evaluated interactions of a series of MSNs possessing different surface functional groups (ionic, polar, neutral, and hydrophobic) with blood constituents, in terms of their hemolytic activity, thrombogenicity, and adsorption of blood proteins on their surfaces. Using a hemolysis assay we showed that surface functionalization can reduce or even completely prevent the hemolytic activity of bare MSNs. We investigated thrombogenicity of MSNs by measuring prothrombin time (PT) and activated partial thromboplastin time (aPTT). We observed that none of the MSNs used in this study exhibit significant thrombogenic activity. Lastly, we examined non-specific protein adsorption on MSN surfaces using human serum albumin (HSA) and gamma globulins (γGs) and found that surface functionalization with ionic groups can greatly reduce protein adsorption. Demonstration of the surface functionalization having a crucial impact on blood compatibility might serve as a guideline for further investigation related to the design of mesoporous silica systems for biomedical applications, and shed light on research towards the ultimate goal of developing smart theranostic systems.

Doubly doped quantum dots with highly efficient (17 %) white-light emission (WLE) have been directly synthesized using a one-pot hot-injection technique (see picture). The generation of WLE was due to the judicious manipulation of the synthesis strategy for the co-doping of the host material-ZnSe quantum dots-with Mn and Cu. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hydrogen is an attractive alternative to fossil fuels in terms of environmental and other advantages. Of the various production methods for H2, photocatalysis requires further development so that it can be applied economically on an industrial scale. One- and two-dimensional nanostructures in both pristine and modified forms have shown great potential as catalysts in the generation of H2. We review here recent developments in these nanostructure catalysts and their efficiency in the generation of H2 under UV/visible/simulated solar light. Despite much research effort, many photocatalysts do not yet meet the practical requirements for the generation of H2, such as visible light activity. H2 production is dependent on a variety of parameters and factors. To meet future energy demands, several challenges in H2 production still need to be solved. We address here the factors that influence the efficiency of H2 production and suggest alternatives. The nanostructures are classified based on their morphology and their efficiency is considered with respect to the influencing parameters. We suggest effective ways of engineering catalyst combinations to overcome the current performance barriers.

Abstract Colloidal nanocrystals of semiconductor quantum dots (QDs) are gaining prominence among the optoelectronic materials in the photonics industry. Among their many applications, their use in artificial lighting and displays has attracted special attention thanks to their high efficiency and narrow emission band, enabling spectral purity and fine tunability. By employing QDs in color‐conversion LEDs, it is possible to simultaneously accomplish successful color rendition of the illuminated objects together with a good spectral overlap between the emission spectrum of the device and the sensitivity of the human eye, in addition to a warm white color, in contrast to other conventional sources such as incandescent and fluorescent lamps, and phosphor‐based LEDs, which cannot achieve all of these properties at the same time. In this review, we summarize the color science of QDs for lighting and displays, and present the recent developments in QD‐integrated LEDs and display research. First, we start with a general introduction to color science, photometry, and radiometry. After presenting an overview of QDs, we continue with the spectral designs of QD‐integrated white LEDs that have led to efficient lighting for indoor and outdoor applications. Subsequently, we discuss QD color‐conversion LEDs and displays as proof‐of‐concept applications – a new paradigm in artificial lighting and displays. Finally, we conclude with a summary of research opportunities and challenges along with a future outlook.

Abstract Van der Waals heterojunctions are fast‐emerging quantum structures fabricated by the controlled stacking of two‐dimensional (2D) materials. Owing to the atomically thin thickness, their carrier properties are not only determined by the host material itself, but also defined by the interlayer interactions, including dielectric environment, charge trapping centers, and stacking angles. The abundant constituents without the limitation of lattice constant matching enable fascinating electrical, optical, and magnetic properties in van der Waals heterojunctions toward next‐generation devices in photonics, optoelectronics, and information sciences. This review focuses on the charge and energy transfer processes and their dynamics in transition metal dichalcogenides (TMDCs), a family of quantum materials with strong excitonic effects and unique valley properties, and other related 2D materials such as graphene and hexagonal‐boron nitride. In the first part, we summarize the ultrafast charge transfer processes in van der Waals heterojunctions, including its experimental evidence and theoretical understanding, the interlayer excitons at the TMDC interfaces, and the hot carrier injection at the graphene/TMDCs interface. In the second part, the energy transfer, including both Förster and Dexter types, are reviewed from both experimental and theoretical perspectives. Finally, we highlight the typical charge and energy transfer applications in photodetectors and summarize the challenges and opportunities for future development in this field.

The authors report on the use of hollow cathode plasma for low-temperature plasma-assisted atomic layer deposition (PA-ALD) of crystalline AlN, GaN and Al_xGa_1−xN thin films with low impurity concentrations.

Two-dimensional (2D) materials have attracted growing interest due to their potential use in the next generation of nanoelectronic and optoelectronic applications. On the basis of first-principles calculations based on density functional theory, we first investigate the electronic and mechanical properties of single layer boron phosphide (h-BP). Our calculations show that h-BP is a mechanically stable 2D material with a direct band gap of 0.9 eV at the K-point, promising for both electronic and optoelectronic applications. We next investigate the electron transport properties of a p-n junction constructed from single layer boron phosphide (h-BP) using the non-equilibrium Green's function formalism. The n- and p-type doping of BP are achieved by substitutional doping of B with C and P with Si, respectively. C(Si) substitutional doping creates donor (acceptor) states close to the conduction (valence) band edge of BP, which are essential to construct an efficient p-n junction. By modifying the structure and doping concentration, it is possible to tune the electronic and transport properties of the p-n junction which exhibits not only diode characteristics with a large current rectification but also negative differential resistance (NDR). The degree of NDR can be easily tuned via device engineering.

Essential tremor is one of the most frequent movement disorders of humans and can be associated with substantial disability. Some but not all persons with essential tremor develop signs of Parkinson disease, and the relationship between the conditions has not been clear. In a six-generation consanguineous Turkish kindred with both essential tremor and Parkinson disease, we carried out whole exome sequencing and pedigree analysis, identifying HTRA2 p.G399S as the allele likely responsible for both conditions. Essential tremor was present in persons either heterozygous or homozygous for this allele. Homozygosity was associated with earlier age at onset of tremor (P < 0.0001), more severe postural tremor (P < 0.0001), and more severe kinetic tremor (P = 0.0019). Homozygotes, but not heterozygotes, developed Parkinson signs in the middle age. Among population controls from the same Anatolian region as the family, frequency of HTRA2 p.G399S was 0.0027, slightly lower than other populations. HTRA2 encodes a mitochondrial serine protease. Loss of function of HtrA2 was previously shown to lead to parkinsonian features in motor neuron degeneration (mnd2) mice. HTRA2 p.G399S was previously shown to lead to mitochondrial dysfunction, altered mitochondrial morphology, and decreased protease activity, but epidemiologic studies of an association between HTRA2 and Parkinson disease yielded conflicting results. Our results suggest that in some families, HTRA2 p.G399S is responsible for hereditary essential tremor and that homozygotes for this allele develop Parkinson disease. This hypothesis has implications for understanding the pathogenesis of essential tremor and its relationship to Parkinson disease.

The COVID-19 pandemic has generated great interest in ultraviolet (UV) disinfection, particularly for air disinfection. Although UV disinfection was discovered close to 90 years ago, only very recently has it reached the consumer market and achieved much acceptance from the public, starting in the 2000s. The current UV light source of choice has been almost exclusively a low-pressure mercury vapor discharge lamp. Today, however, with emerging deep-UV (DUV) chip-scale technologies, there has been a significant advancement, along with ever-increasing interest, in the development and deployment of disinfection systems that employ compact devices that emit in the deep-UV spectral band (200–280 nm), including UV light-emitting diodes (LEDs) and cathodoluminescent (CL) chips. This perspective looks into competing UV technologies (including mercury lamps and excimer lamps as benchmarks) on their optical merits and demerits and discusses the emerging chip-scale technologies of DUV electroluminescent and cathodoluminescent devices, comparing them against the benchmarks and providing an overview of the challenges and prospects. The accelerating progress in chip-scale solutions for deep-UV light sources promises a bright future in UV disinfection.

In our study, an electrospun cellulose acetate nanofibrous web (CA-NFW) was found to be quite effective in immobilizing bacterial cells.

Vanillin/cyclodextrin inclusion complex nanofibers (vanillin/CD-IC NFs) were successfully obtained from three modified CD types (HPβCD, HPγCD and MβCD) in three different solvent systems (water, DMF and DMAc) via an electrospinning technique without using a carrier polymeric matrix. Vanillin/CD-IC NFs with uniform and bead-free fiber morphology were successfully produced and their free-standing nanofibrous webs were obtained. The polymer-free CD/vanillin-IC-NFs allow us to accomplish a much higher vanillin loading (∼12%, w/w) when compared to electrospun polymeric nanofibers containing CD/vanillin-IC (∼5%, w/w). Vanillin has a volatile nature yet, after electrospinning, a significant amount of vanillin was preserved due to complex formation depending on the CD types. Maximum preservation of vanillin was observed for vanillin/MβCD-IC NFs which is up to ∼85% w/w, besides, a considerable amount of vanillin (∼75% w/w) was also preserved for vanillin/HPβCD-IC NFs and vanillin/HPγCD-IC NFs. Phase solubility studies suggested a 1 : 1 molar complexation tendency between guest vanillin and host CD molecules. Molecular modelling studies and experimental findings revealed that vanillin : CD complexation was strongest for MβCD when compared to HPβCD and HPγCD in vanillin/CD-IC NFs. For vanillin/CD-IC NFs, water solubility and the antioxidant property of vanillin was improved significantly owing to inclusion complexation. In brief, polymer-free vanillin/CD-IC NFs are capable of incorporating a much higher loading of vanillin and effectively preserve volatile vanillin. Hence, encapsulation of volatile active agents such as flavor, fragrance and essential oils in electrospun polymer-free CD-IC NFs may have potential for food related applications by integrating the particularly large surface area of NFs with the non-toxic nature of CD and inclusion complexation benefits, such as high temperature stability, improved water solubility and an enhanced antioxidant property, etc.

Solar-thermal fuels reversibly store solar energy in the chemical bonds of molecules by photoconversion, and can release this stored energy in the form of heat upon activation. Many conventional photoswichable molecules could be considered as solar thermal fuels, although they suffer from low energy density or short lifetime in the photoinduced high-energy metastable state, rendering their practical use unfeasible. We present a new approach to the design of chemistries for solar thermal fuel applications, wherein well-known photoswitchable molecules are connected by different linker agents to form molecular rings. This approach allows for a significant increase in both the amount of stored energy per molecule and the stability of the fuels. Our results suggest a range of possibilities for tuning the energy density and thermal stability as a function of the type of the photoswitchable molecule, the ring size, or the type of linkers.

The core–shell form of ZnO–ZnS based heterostructural nanofibers (NF) has received increased attention for use as a photocatalyst owing to its potential for outstanding performance under visible irradiation.

Free-standing nanofibrous webs of cyclodextrin/geraniol–inclusion complex (CD/geraniol–IC-NF) showing antibacterial, antioxidant activity and slow release of geraniol were developed as flavour/fragrance releasing materials<italic>via</italic>electrospinning.

We demonstrate with experiments and numerical simulations that the structure and dynamics of a suspension of passive particles is strongly altered by adding a very small (<1%) number of active particles. With increasing passive particle density, we observe first the formation of dynamic clusters comprised of passive particles being surrounded by active particles, then the merging and compression of these clusters, and eventually the local melting of crystalline regions by enclosed active particles.

A large-area superhydrophobic and omnidirectional antireflective nanostructured organically modified silica coating has been designed and prepared. The coating mimics the self-cleaning property of superhydrophobic lotus leaves and omnidirectional broad band antireflectivity of moth compound eyes, simultaneously. Water contact and sliding angles of the coating are around 160° and 10°, respectively. Coating improves the transmittance of the glass substrate around 4%, when coated on a single side of a glass, in visible and near-infrared region at normal incidence angles. At oblique incidence angles (up to 60°) improvement in transmission reaches to around 8%. In addition, coatings are mechanically stable against impact of water droplets from considerable heights. We believe that our inexpensive and durable multifunctional coatings are suitable for stepping out of the laboratory to practical outdoor applications.

Abstract Recent advances in colloidal synthesis of nanocrystals have enabled high‐quality high‐efficiency light‐emitting diodes, displays with significantly broader color gamut, and optically‐pumped lasers spanning the whole visible regime. Here we review these colloidal platforms covering the milestone studies together with recent developments. In the review, we focus on the devices made of colloidal quantum dots (nanocrystals), colloidal quantum rods (nanorods), and colloidal quantum wells (nanoplatelets) as well as those of solution processed perovskites and phosphor nanocrystals. The review starts with an introduction to colloidal nanocrystal photonics emphasizing the importance of colloidal materials for light‐emitting devices. Subsequently, we continue with the summary of important reports on light‐emitting diodes, in which colloids are used as the color converters and then as the emissive layers in electroluminescent devices. Also, we review the developments in color enrichment and electroluminescent displays. Next, we present a summary of important reports on the lasing of colloidal semiconductors. Finally, we summarize and conclude the review presenting a future outlook.

This study demonstrates the acute toxicity of lanthanum oxide nanoparticles (La2O3 NP) on two sentinel aquatic species, fresh-water microalgae Chlorella sp. and the crustacean Daphnia magna. The morphology, size and charge of the nanoparticles were systematically studied. The algal growth inhibition assay confirmed absence of toxic effects of La2O3 NP on Chlorella sp., even at higher concentration (1000 mg L(-1)) after 72 h exposure. Similarly, no significant toxic effects were observed on D. magna at concentrations of 250 mg L(-1) or less, and considerable toxic effects were noted in higher concentrations (effective concentration [EC50] 500 mg L(-1); lethal dose [LD50] 1000 mg L(-1)). In addition, attachment of La2O3 NP on aquatic species was demonstrated using microscopy analysis. This study proved to be beneficial in understanding acute toxicity in order to provide environmental protection as part of risk assessment strategies.