National Synchrotron Radiation Laboratory

Supercapacitors (also known as ultracapacitors) are considered to be the most promising approach to meet the pressing requirements of energy storage. Supercapacitive electrode materials, which are closely related to the high-efficiency storage of energy, have provoked more interest. Herein, we present a high-capacity supercapacitor material based on the nitrogen-doped porous carbon nanofibers synthesized by carbonization of macroscopic-scale carbonaceous nanofibers (CNFs) coated with polypyrrole (CNFs@polypyrrole) at an appropriate temperature. The composite nanofibers exhibit a reversible specific capacitance of 202.0 F g(-1) at the current density of 1.0 A g(-1) in 6.0 mol L(-1) aqueous KOH electrolyte, meanwhile maintaining a high-class capacitance retention capability and a maximum power density of 89.57 kW kg(-1). This kind of nitrogen-doped carbon nanofiber represents an alternative promising candidate for an efficient electrode material for supercapacitors.

Advanced energy conversion and storage (ECS) devices (including fuel cells, photoelectrochemical water splitting cells, solar cells, Li-ion batteries and supercapacitors) are expected to play a major role in the development of sustainable technologies that alleviate the energy and environmental challenges we are currently facing. The successful utilization of ECS devices depends critically on synthesizing new nanomaterials with merits of low cost, high efficiency, and outstanding properties. Recent progress has demonstrated that nanostructured metal chalcogenides (MCs) are very promising candidates for efficient ECS systems based on their unique physical and chemical properties, such as conductivity, mechanical and thermal stability and cyclability. In this review, we aim to provide a summary on the liquid-phase synthesis, modifications, and energy-related applications of nanostructured metal chalcogenide (MC) materials. The liquid-phase syntheses of various MC nanomaterials are primarily categorized with the preparation method (mainly 15 kinds of methods). To obtain optimized, enhanced or even new properties, the nanostructured MC materials can be modified by other functional nanomaterials such as carbon-based materials, noble metals, metal oxides, or MCs themselves. Thus, this review will then be focused on the recent strategies used to realize the modifications of MC nanomaterials. After that, the ECS applications of the MC/modified-MC nanomaterials have been systematically summarized based on a great number of successful cases. Moreover, remarks on the challenges and perspectives for future MC research are proposed (403 references).

Because of their high theoretical energy density and low cost, lithium–sulfur (Li–S) batteries are promising next-generation energy storage devices. The electrochemical performance of Li–S batteries largely depends on the efficient reversible conversion of Li polysulfides to Li2S in discharge and to elemental S during charging. Here, we report on our discovery that monodisperse cobalt atoms embedded in nitrogen-doped graphene (Co–N/G) can trigger the surface-mediated reaction of Li polysulfides. Using a combination of operando X-ray absorption spectroscopy and first-principles calculation, we reveal that the Co–N–C coordination center serves as a bifunctional electrocatalyst to facilitate both the formation and the decomposition of Li2S in discharge and charge processes, respectively. The S@Co–N/G composite, with a high S mass ratio of 90 wt %, can deliver a gravimetric capacity of 1210 mAh g–1, and it exhibits an areal capacity of 5.1 mAh cm–2 with capacity fading rate of 0.029% per cycle over 100 cycles at 0.2 C at S loading of 6.0 mg cm–2 on the electrode disk.

Although considerable progress has been made in direct synthesis gas (syngas) conversion to light olefins (C2(=)-C4(=)) via Fischer-Tropsch synthesis (FTS), the wide product distribution remains a challenge, with a theoretical limit of only 58% for C2-C4 hydrocarbons. We present a process that reaches C2(=)-C4(=) selectivity as high as 80% and C2-C4 94% at carbon monoxide (CO) conversion of 17%. This is enabled by a bifunctional catalyst affording two types of active sites with complementary properties. The partially reduced oxide surface (ZnCrO(x)) activates CO and H2, and C-C coupling is subsequently manipulated within the confined acidic pores of zeolites. No obvious deactivation is observed within 110 hours. Furthermore, this composite catalyst and the process may allow use of coal- and biomass-derived syngas with a low H2/CO ratio.

Isolated single-atom platinum (Pt) embedded in the sub-nanoporosity of 2D g-C3N4 as a new form of co-catalyst is reported. The highly stable single-atom co-catalyst maximizes the atom efficiency and alters the surface trap states of g-C3N4, leading to significantly enhanced photocatalytic H2 evolution activity, 8.6 times higher than that of Pt nanoparticles and up to 50 times that for bare g-C3N4. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Defect-rich and ultrathin N doped carbon nanosheets exhibited low overpotentials and robust stability for simultaneous ORR, OER and HER.

Modern development of chemical manufacturing requires a substantial reduction in energy consumption and catalyst cost. Sunlight-driven chemical transformation by metal oxides holds great promise for this goal; however, it remains a grand challenge to efficiently couple solar energy into many catalytic reactions. Here we report that defect engineering on oxide catalyst can serve as a versatile approach to bridge light harvesting with surface reactions by ensuring species chemisorption. The chemisorption not only spatially enables the transfer of photoexcited electrons to reaction species, but also alters the form of active species to lower the photon energy requirement for reactions. In a proof of concept, oxygen molecules are activated into superoxide radicals on defect-rich tungsten oxide through visible-near-infrared illumination to trigger organic aerobic couplings of amines to corresponding imines. The excellent efficiency and durability for such a highly important process in chemical transformation can otherwise be virtually impossible to attain by counterpart materials.

Exploring efficient and inexpensive oxygen evolution reaction (OER) electrocatalysts is of great importance for various electrochemical energy storage and conversion technologies. Ni-based electrocatalysts have been actively pursued because of their promising activity and earth abundance. However, the OER efficiency for most of the developed Ni-based electrocatalysts has been intrinsically limited due to their low electrical conductivity and poor active site exposure yield. Herein, we report metallic Ni3N nanosheets as an efficient OER electrocatalyst for the first time. The first-principles calculations and electrical transport property measurements unravel that the Ni3N is intrinsically metallic, and the carrier concentration can be remarkably improved with dimensional confinement. The EXAFS spectra provide solid evidence that the Ni3N nanosheets have disordered structure resultant of dimensional reduction, which then could provide more active sites for OER. Benefiting from enhanced electrical conductivity with metallic behavior and atomically disordered structure, the Ni3N nanosheets realize intrinsically improved OER activity compared with bulk Ni3N and NiO nanosheets. Our finding suggests that metallic nitride nanosheets could serve as a new group of OER electrocatalysts with excellent property.

Abstract The design of active, selective, and stable CO 2 reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO 2 electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm −2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h −1 , surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO 2 to the CO 2 .− intermediate and hence enhances CO 2 electroreduction activity.

We report a one-step fabrication of macroscopic multifunctional graphene-based hydrogels with robust interconnected networks under the synergistic effects of the reduction of graphene oxide sheets by ferrous ions and in situ simultaneous deposition of nanoparticles on graphene sheets. The functional components, such as α-FeOOH nanorods and magnetic Fe(3)O(4) nanoparticles, can be easily incorporated with graphene sheets to assemble macroscopic graphene monoliths just by control of pH value under mild conditions. Such functional graphene-based hydrogels exhibit excellent capability for removal of pollutants and, thus, could be used as promising adsorbents for water purification. The method presented here is proved to be versatile to induce macroscopic assembly of reduced graphene sheets with other functional metal oxides and thus to access a variety of graphene-based multifunctional nanocomposites in the form of macroscopic hydrogels or aerogels.

According to Yang Shao-Horn's principle, CoSe2 is a promising candidate as an efficient, affordable, and sustainable alternative electrocatalyst for the oxygen evolution reaction, owing to its well-suited electronic configuration of Co ions. However, the catalytic efficiency of pure CoSe2 is still far below what is expected, because of its poor active site exposure yield. Herein, we successfully overcome the disadvantage of insufficient active sites in bulk CoSe2 by reducing its thickness into the atomic scale rather than any additional modification (such as doping or hybridizing with graphene or noble metals). The positron annihilation spectrometry and XAFS spectra provide clear evidence that a large number of VCo″ vacancies formed in the ultrathin nanosheets. The first-principles calculations reveal that these VCo″ vacancies can serve as active sites to efficiently catalyze the oxygen evolution reaction, manifesting an OER overpotential as low as 0.32 V at 10 mA cm(-2) in pH 13 medium, which is superior to the values for its bulk counterparts as well as those for the most reported Co-based electrocatalysts. Considering the outstanding performance of the simple, unmodified ultrathin CoSe2 nanosheets as the only catalyst, further improvement of the catalytic activity is expected when various strategies of doping or hybridizing are used. These results not only demonstrate the potential of a notable, affordable, and earth-abundant water oxidation electrocatalyst based on ultrathin CoSe2 nanosheets but also open up a promising avenue into the exploration of excellent active and durable catalysts toward replacing noble metals for oxygen electrocatalysis.

Abstract Rational design of non‐noble materials as highly efficient, economical, and durable bifunctional catalysts for oxygen evolution and reduction reactions (OER/ORR) is currently a critical obstacle for rechargeable metal‐air batteries. A new route involving S was developed to achieve atomic dispersion of Fe‐N x species on N and S co‐decorated hierarchical carbon layers, resulting in single‐atom bifunctional OER/ORR catalysts for the first time. The abundant atomically dispersed Fe‐N x species are highly catalytically active, the hierarchical structure offers more opportunities for active sites, and the electrical conductivity is greatly improved. The obtained electrocatalyst exhibits higher limiting current density and a more positive half‐wave potential for ORR, as well as a lower overpotential for OER under alkaline conditions. Moreover, a rechargeable Zn–air battery device comprising this hybrid catalyst shows superior performance compared to Pt/C catalyst. This work will open a new avenue to design advanced bifunctional catalysts for reversible energy storage and conversion devices.

Free-standing graphene paper with a grey metallic luster has been fabricated for the first time, by a convenient one-step method on a large scale. Herein, the assembly of graphene oxide dispersion into ordered paper occurs simultaneously with the chemical reduction of graphene oxide to graphene. The graphene paper presents the advantages of good flexibility, low weight (0.2 g cm−3) and high electrical conductivity (15 Ω sq−1). Moreover, the size and shape of the graphene paper are freely exchanged for those of the Teflon substrate used. The flexible graphene–PANI paper subsequently exhibits excellent supercapacitor performance with an enhanced specific capacitance (763 F g−1) and good cycling stability by electropolymerization of PANI nanorods on the above graphene paper. The method presented here shows great promise for the development of low-cost electrode materials in potential energy storage devices.

We reported that atomically dispersed Pd on graphene can be fabricated using the atomic layer deposition technique. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectroscopy both confirmed that isolated Pd single atoms dominantly existed on the graphene support. In selective hydrogenation of 1,3-butadiene, the single-atom Pd1/graphene catalyst showed about 100% butenes selectivity at 95% conversion at a mild reaction condition of about 50 °C, which is likely due to the changes of 1,3-butadiene adsorption mode and enhanced steric effect on the isolated Pd atoms. More importantly, excellent durability against deactivation via either aggregation of metal atoms or carbonaceous deposits during a total 100 h of reaction time on stream was achieved. Therefore, the single-atom catalysts may open up more opportunities to optimize the activity, selectivity, and durability in selective hydrogenation reactions.

Abstract Endowing materials with specific functions that are not readily available is always of great importance, but extremely challenging. Co 4 N, with its beneficial metallic characteristics, has been proved to be highly active for the oxidation of water, while it is notoriously poor for catalyzing the hydrogen evolution reaction (HER), because of its unfavorable d‐band energy level. Herein, we successfully endow Co 4 N with prominent HER catalytic capability by tailoring the positions of the d‐band center through transition‐metal doping. The V‐doped Co 4 N nanosheets display an overpotential of 37 mV at 10 mA cm −2 , which is substantially better than Co 4 N and even close to the benchmark Pt/C catalysts. XANES, UPS, and DFT calculations consistently reveal the enhanced performance is attributed to the downshift of the d‐band center, which helps facilitate the H desorption. This concept could provide valuable insights into the design of other catalysts for HER and beyond.

Single-atom photocatalysts have shown their compelling potential and arguably become the most active research direction in photocatalysis due to their fascinating strengths in enhancing light-harvesting, charge transfer dynamics, and surface reactions of a photocatalytic system. While numerous comprehensions about the single-atom photocatalysts have recently been amassed, advanced characterization techniques and vital theoretical studies are strengthening our understanding on these fascinating materials, allowing us to forecast their working mechanisms and applications in photocatalysis. In this review, we begin by describing the general background and definition of the single-atom photocatalysts. A brief discussion of the metal-support interactions on the single-atom photocatalysts is then provided. Thereafter, the current available characterization techniques for single-atom photocatalysts are summarized. After having some fundamental understanding on the single-atom photocatalysts, their advantages and applications in photocatalysis are discussed. Finally, we end this review with a look into the remaining challenges and future perspectives of single-atom photocatalysts. We anticipate that this review will provide some inspiration for the future discovery of the single-atom photocatalysts, manifestly stimulating the development in this emerging research area.

Abstract Isolated single atomic site catalysts have attracted great interest due to their remarkable catalytic properties. Because of their high surface energy, single atoms are highly mobile and tend to form aggregate during synthetic and catalytic processes. Therefore, it is a significant challenge to fabricate isolated single atomic site catalysts with good stability. Herein, a gentle method to stabilize single atomic site metal by constructing defects on the surface of supports is presented. As a proof of concept, single atomic site Au supported on defective TiO 2 nanosheets is prepared and it is discovered that (1) the surface defects on TiO 2 nanosheets can effectively stabilize Au single atomic sites through forming the Ti–Au–Ti structure; and (2) the Ti–Au–Ti structure can also promote the catalytic properties through reducing the energy barrier and relieving the competitive adsorption on isolated Au atomic sites. It is believed that this work paves a way to design stable and active single atomic site catalysts on oxide supports.

It is of great importance to understand the origin of high oxygen-evolving activity of state-of-the-art multimetal oxides/(oxy)hydroxides at atomic level. Herein we report an evident improvement of oxygen evolution reaction activity via incorporating iron and vanadium into nickel hydroxide lattices. X-ray photoelectron/absorption spectroscopies reveal the synergistic interaction between iron/vanadium dopants and nickel in the host matrix, which subtly modulates local coordination environments and electronic structures of the iron/vanadium/nickel cations. Further, in-situ X-ray absorption spectroscopic analyses manifest contraction of metal-oxygen bond lengths in the activated catalyst, with a short vanadium-oxygen bond distance. Density functional theory calculations indicate that the vanadium site of the iron/vanadium co-doped nickel (oxy)hydroxide gives near-optimal binding energies of oxygen evolution reaction intermediates and has lower overpotential compared with nickel and iron sites. These findings suggest that the doped vanadium with distorted geometric and disturbed electronic structures makes crucial contribution to high activity of the trimetallic catalyst.

Photocatalysis may provide an intriguing approach to nitrogen fixation, which relies on the transfer of photoexcited electrons to the ultrastable N≡N bond. Upon N2 chemisorption at active sites (e.g., surface defects), the N2 molecules have yet to receive energetic electrons toward efficient activation and dissociation, often forming a bottleneck. Herein, we report that the bottleneck can be well tackled by refining the defect states in photocatalysts via doping. As a proof of concept, W18O49 ultrathin nanowires are employed as a model material for subtle Mo doping, in which the coordinatively unsaturated (CUS) metal atoms with oxygen defects serve as the sites for N2 chemisorption and electron transfer. The doped low-valence Mo species play multiple roles in facilitating N2 activation and dissociation by refining the defect states of W18O49: (1) polarizing the chemisorbed N2 molecules and facilitating the electron transfer from CUS sites to N2 adsorbates, which enables the N≡N bond to be more feasible for dissociation through proton coupling; (2) elevating defect-band center toward the Fermi level, which preserves the energy of photoexcited electrons for N2 reduction. As a result, the 1 mol % Mo-doped W18O49 sample achieves an ammonia production rate of 195.5 μmol gcat–1 h–1, 7-fold higher than that of pristine W18O49. In pure water, the catalyst demonstrates an apparent quantum efficiency of 0.33% at 400 nm and a solar-to-ammonia efficiency of 0.028% under simulated AM 1.5 G light irradiation. This work provides fresh insights into the design of photocatalyst lattice for N2 fixation and reaffirms the versatility of subtle electronic structure modulation in tuning catalytic activity.

Although biomimetic designs are expected to play a key role in exploring future structural materials, facile fabrication of bulk biomimetic materials under ambient conditions remains a major challenge. Here, we describe a mesoscale "assembly-and-mineralization" approach inspired by the natural process in mollusks to fabricate bulk synthetic nacre that highly resembles both the chemical composition and the hierarchical structure of natural nacre. The millimeter-thick synthetic nacre consists of alternating organic layers and aragonite platelet layers (91 weight percent) and exhibits good ultimate strength and fracture toughness. This predesigned matrix-directed mineralization method represents a rational strategy for the preparation of robust composite materials with hierarchically ordered structures, where various constituents are adaptable, including brittle and heat-labile materials.