NILU

Per- and polyfluoroalkyl substances (PFAS) are of concern because of their high persistence (or that of their degradation products) and their impacts on human and environmental health that are known or can be deduced from some well-studied PFAS. Currently, many different PFAS (on the order of several thousands) are used in a wide range of applications, and there is no comprehensive source of information on the many individual substances and their functions in different applications. Here we provide a broad overview of many use categories where PFAS have been employed and for which function; we also specify which PFAS have been used and discuss the magnitude of the uses. Despite being non-exhaustive, our study clearly demonstrates that PFAS are used in almost all industry branches and many consumer products. In total, more than 200 use categories and subcategories are identified for more than 1400 individual PFAS. In addition to well-known categories such as textile impregnation, fire-fighting foam, and electroplating, the identified use categories also include many categories not described in the scientific literature, including PFAS in ammunition, climbing ropes, guitar strings, artificial turf, and soil remediation. We further discuss several use categories that may be prioritised for finding PFAS-free alternatives. Besides the detailed description of use categories, the present study also provides a list of the identified PFAS per use category, including their exact masses for future analytical studies aiming to identify additional PFAS.

Abstract. The Lagrangian particle dispersion model FLEXPART was originally (about 8 years ago) designed for calculating the long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. In the meantime FLEXPART has evolved into a comprehensive tool for atmospheric transport modeling and analysis. Its application fields were extended from air pollution studies to other topics where atmospheric transport plays a role (e.g., exchange between the stratosphere and troposphere, or the global water cycle). It has evolved into a true community model that is now being used by at least 25 groups from 14 different countries and is seeing both operational and research applications. A user manual has been kept actual over the years and was distributed over an internet page along with the model's source code. In this note we provide a citeable technical description of FLEXPART's latest version (6.2).

Abstract. The libRadtran software package is a suite of tools for radiative transfer calculations in the Earth's atmosphere. Its main tool is the uvspec program. It may be used to compute radiances, irradiances and actinic fluxes in the solar and terrestrial part of the spectrum. The design of uvspec allows simple problems to be easily solved using defaults and included data, hence making it suitable for educational purposes. At the same time the flexibility in how and what input may be specified makes it a powerful and versatile tool for research tasks. The uvspec tool and additional tools included with libRadtran are described and realistic examples of their use are given. The libRadtran software package is available from http://www.libradtran.org.

Abstract In this first worldwide synthesis of in situ and satellite‐derived lake data, we find that lake summer surface water temperatures rose rapidly (global mean = 0.34°C decade −1 ) between 1985 and 2009. Our analyses show that surface water warming rates are dependent on combinations of climate and local characteristics, rather than just lake location, leading to the counterintuitive result that regional consistency in lake warming is the exception, rather than the rule. The most rapidly warming lakes are widely geographically distributed, and their warming is associated with interactions among different climatic factors—from seasonally ice‐covered lakes in areas where temperature and solar radiation are increasing while cloud cover is diminishing (0.72°C decade −1 ) to ice‐free lakes experiencing increases in air temperature and solar radiation (0.53°C decade −1 ). The pervasive and rapid warming observed here signals the urgent need to incorporate climate impacts into vulnerability assessments and adaptation efforts for lakes.

The International Strawberry Sequencing Consortium reports the draft genome of the woodland strawberry (Fragaria vesca). The genome of this diploid species should serve as a reference genome for the Fragaria genus, as the cultivated strawberry (Fragaria × ananassa) is an octoploid where F. vesca is predicted to be a subgenome donor. The woodland strawberry, Fragaria vesca (2n = 2x = 14), is a versatile experimental plant system. This diminutive herbaceous perennial has a small genome (240 Mb), is amenable to genetic transformation and shares substantial sequence identity with the cultivated strawberry (Fragaria × ananassa) and other economically important rosaceous plants. Here we report the draft F. vesca genome, which was sequenced to ×39 coverage using second-generation technology, assembled de novo and then anchored to the genetic linkage map into seven pseudochromosomes. This diploid strawberry sequence lacks the large genome duplications seen in other rosids. Gene prediction modeling identified 34,809 genes, with most being supported by transcriptome mapping. Genes critical to valuable horticultural traits including flavor, nutritional value and flowering time were identified. Macrosyntenic relationships between Fragaria and Prunus predict a hypothetical ancestral Rosaceae genome that had nine chromosomes. New phylogenetic analysis of 154 protein-coding genes suggests that assignment of Populus to Malvidae, rather than Fabidae, is warranted.

Abstract. Although black carbon (BC) is one of the key atmospheric particulate components driving climate change and air quality, there is no agreement on the terminology that considers all aspects of specific properties, definitions, measurement methods, and related uncertainties. As a result, there is much ambiguity in the scientific literature of measurements and numerical models that refer to BC with different names and based on different properties of the particles, with no clear definition of the terms. The authors present here a recommended terminology to clarify the terms used for BC in atmospheric research, with the goal of establishing unambiguous links between terms, targeted material properties and associated measurement techniques.

Abstract In recent years, marine, freshwater and terrestrial pollution with microplastics has been discussed extensively, whereas atmospheric microplastic transport has been largely overlooked. Here, we present global simulations of atmospheric transport of microplastic particles produced by road traffic (TWPs – tire wear particles and BWPs – brake wear particles), a major source that can be quantified relatively well. We find a high transport efficiencies of these particles to remote regions. About 34% of the emitted coarse TWPs and 30% of the emitted coarse BWPs (100 kt yr −1 and 40 kt yr −1 respectively) were deposited in the World Ocean. These amounts are of similar magnitude as the total estimated direct and riverine transport of TWPs and fibres to the ocean (64 kt yr −1 ). We suggest that the Arctic may be a particularly sensitive receptor region, where the light-absorbing properties of TWPs and BWPs may also cause accelerated warming and melting of the cryosphere.

BACKGROUND: A plant-based diet protects against chronic oxidative stress-related diseases. Dietary plants contain variable chemical families and amounts of antioxidants. It has been hypothesized that plant antioxidants may contribute to the beneficial health effects of dietary plants. Our objective was to develop a comprehensive food database consisting of the total antioxidant content of typical foods as well as other dietary items such as traditional medicine plants, herbs and spices and dietary supplements. This database is intended for use in a wide range of nutritional research, from in vitro and cell and animal studies, to clinical trials and nutritional epidemiological studies. METHODS: We procured samples from countries worldwide and assayed the samples for their total antioxidant content using a modified version of the FRAP assay. Results and sample information (such as country of origin, product and/or brand name) were registered for each individual food sample and constitute the Antioxidant Food Table. RESULTS: The results demonstrate that there are several thousand-fold differences in antioxidant content of foods. Spices, herbs and supplements include the most antioxidant rich products in our study, some exceptionally high. Berries, fruits, nuts, chocolate, vegetables and products thereof constitute common foods and beverages with high antioxidant values. CONCLUSIONS: This database is to our best knowledge the most comprehensive Antioxidant Food Database published and it shows that plant-based foods introduce significantly more antioxidants into human diet than non-plant foods. Because of the large variations observed between otherwise comparable food samples the study emphasizes the importance of using a comprehensive database combined with a detailed system for food registration in clinical and epidemiological studies. The present antioxidant database is therefore an essential research tool to further elucidate the potential health effects of phytochemical antioxidants in diet.

The emergence of low-cost, user-friendly and very compact air pollution platforms enable observations at high spatial resolution in near-real-time and provide new opportunities to simultaneously enhance existing monitoring systems, as well as engage citizens in active environmental monitoring. This provides a whole new set of capabilities in the assessment of human exposure to air pollution. However, the data generated by these platforms are often of questionable quality. We have conducted an exhaustive evaluation of 24 identical units of a commercial low-cost sensor platform against CEN (European Standardization Organization) reference analyzers, evaluating their measurement capability over time and a range of environmental conditions. Our results show that their performance varies spatially and temporally, as it depends on the atmospheric composition and the meteorological conditions. Our results show that the performance varies from unit to unit, which makes it necessary to examine the data quality of each node before its use. In general, guidance is lacking on how to test such sensor nodes and ensure adequate performance prior to marketing these platforms. We have implemented and tested diverse metrics in order to assess if the sensor can be employed for applications that require high accuracy (i.e., to meet the Data Quality Objectives defined in air quality legislation, epidemiological studies) or lower accuracy (i.e., to represent the pollution level on a coarse scale, for purposes such as awareness raising). Data quality is a pertinent concern, especially in citizen science applications, where citizens are collecting and interpreting the data. In general, while low-cost platforms present low accuracy for regulatory or health purposes they can provide relative and aggregated information about the observed air quality.

Abstract. Thermal-optical analysis is a conventional method for determining the carbonaceous aerosol fraction and for classifying it into organic carbon, OC, and elemental carbon, EC. Unfortunately, the different thermal evolution protocols in use can result in a wide elemental carbon-to-total carbon variation by up to a factor of five. In Europe, there is currently no standard procedure for determining the carbonaceous aerosol fraction which implies that data from different laboratories at various sites are of unknown accuracy and cannot be considered comparable. In the framework of the EU-project EUSAAR (European Supersites for Atmospheric Aerosol Research), a comprehensive study has been carried out to identify the causes of differences in the EC measured using different thermal evolution protocols; thereby the major positive and negative biases affecting thermal-optical analysis have been isolated and minimised to define an optimised protocol suitable for European aerosols. Our approach to improve the accuracy of the discrimination between OC and EC was essentially based on four goals. Firstly, charring corrections rely on faulty assumptions – e.g. pyrolytic carbon is considered to evolve completely before native EC throughout the analysis –, thus we have reduced pyrolysis to a minimum by favoring volatilisation of OC. Secondly, we have minimised the potential negative bias in EC determination due to early evolution of light absorbing carbon species at higher temperatures in the He-mode, including both native EC and combinations of native EC and pyrolytic carbon potentially with different specific attenuation cross section values. Thirdly, we have minimised the potential positive bias in EC determination resulting from the incomplete evolution of OC during the He-mode which then evolves during the He/O2-mode, potentially after the split point. Finally, we have minimised the uncertainty due to the position of the OC/EC split point on the FID response profile by introducing multiple desorption steps in the He/O2-mode. Based on different types of carbonaceous PM encountered across Europe, we have defined an optimised thermal evolution protocol, the EUSAAR_2 protocol, as follows: step 1 in He, 200 °C for 120 s; step 2 in He 300 °C for 150 s; step 3 in He 450 °C for 180 s; step 4 in He 650 °C for 180 s. For steps 1–4 in He/O2, the conditions are 500 °C for 120 s, 550 °C for 120 s, 700 ° C for 70 s, and 850 °C for 80 s, respectively.

Abstract. Mobility particle size spectrometers often referred to as DMPS (Differential Mobility Particle Sizers) or SMPS (Scanning Mobility Particle Sizers) have found a wide range of applications in atmospheric aerosol research. However, comparability of measurements conducted world-wide is hampered by lack of generally accepted technical standards and guidelines with respect to the instrumental set-up, measurement mode, data evaluation as well as quality control. Technical standards were developed for a minimum requirement of mobility size spectrometry to perform long-term atmospheric aerosol measurements. Technical recommendations include continuous monitoring of flow rates, temperature, pressure, and relative humidity for the sheath and sample air in the differential mobility analyzer. We compared commercial and custom-made inversion routines to calculate the particle number size distributions from the measured electrical mobility distribution. All inversion routines are comparable within few per cent uncertainty for a given set of raw data. Furthermore, this work summarizes the results from several instrument intercomparison workshops conducted within the European infrastructure project EUSAAR (European Supersites for Atmospheric Aerosol Research) and ACTRIS (Aerosols, Clouds, and Trace gases Research InfraStructure Network) to determine present uncertainties especially of custom-built mobility particle size spectrometers. Under controlled laboratory conditions, the particle number size distributions from 20 to 200 nm determined by mobility particle size spectrometers of different design are within an uncertainty range of around ±10% after correcting internal particle losses, while below and above this size range the discrepancies increased. For particles larger than 200 nm, the uncertainty range increased to 30%, which could not be explained. The network reference mobility spectrometers with identical design agreed within ±4% in the peak particle number concentration when all settings were done carefully. The consistency of these reference instruments to the total particle number concentration was demonstrated to be less than 5%. Additionally, a new data structure for particle number size distributions was introduced to store and disseminate the data at EMEP (European Monitoring and Evaluation Program). This structure contains three levels: raw data, processed data, and final particle size distributions. Importantly, we recommend reporting raw measurements including all relevant instrument parameters as well as a complete documentation on all data transformation and correction steps. These technical and data structure standards aim to enhance the quality of long-term size distribution measurements, their comparability between different networks and sites, and their transparency and traceability back to raw data.

The intensity of the heaviest extreme precipitation events is known to increase with global warming. How often such events occur in a warmer world is however less well established, and the combined effect of changes in frequency and intensity on the total amount of rain falling as extreme precipitation is much less explored, in spite of potentially large societal impacts. Here, we employ observations and climate model simulations to document strong increases in the frequencies of extreme precipitation events occurring on decadal timescales. Based on observations we find that the total precipitation from these intense events almost doubles per degree of warming, mainly due to changes in frequency, while the intensity changes are relatively weak, in accordance to previous studies. This shift towards stronger total precipitation from extreme events is seen in observations and climate models, and increases with the strength - and hence the rareness - of the event. Based on these results, we project that if historical trends continue, the most intense precipitation events observed today are likely to almost double in occurrence for each degree of further global warming. Changes to extreme precipitation of this magnitude are dramatically stronger than the more widely communicated changes to global mean precipitation.

The Lagrangian particle dispersion model FLEXPART was used to construct a global data set of 1.4 million continuous trajectories. At the model start, particles were distributed homogeneously in the atmosphere and were then transported for 5.5 years using both resolved winds from European Centre for Medium‐Range Weather Forecasts analyses and parameterized turbulent and convective transport. On the basis of this data set, a climatology of transport in and to the Arctic was developed. It was found that the time air resides continuously north of 70°N, called its Arctic age, is highest near the surface in the North American sector of the Arctic. North of 80°N and near the surface, the mean Arctic age of air is about 1 week in winter and 2 weeks in summer. It decreases rapidly with altitude to about 3 days in the upper troposphere. In the most isolated regions of the Arctic, air is exposed to continuous darkness for, on average, 10–14 days in December. Transport from the stratosphere to the lower troposphere is much slower in the Arctic than in the middle latitudes. In the central Arctic, for instance, the probability that air near the surface was transported from the stratosphere within 10 days is only about 1% in winter and 0.3% in summer. Air pollution can be transported into the Arctic along three different pathways: low‐level transport followed by ascent in the Arctic, low‐level transport alone, and uplift outside the Arctic, followed by descent in the Arctic. Only this last pathway is frequent for pollution originating from North America and Asia, whereas European pollution can follow all three pathways in winter, and pathways one and three in summer. Sensitivities of Arctic air masses to emissions of air pollutants, based on transport alone, were calculated for times of up to 30 days before the air masses reached the Arctic. They were highest over Siberia and Europe in winter and over the oceans in summer. Using an inventory for anthropogenic black carbon (BC) emissions, it was found that near the surface and for transport timescales of 5 and 10 days, BC source contributions from south Asia are only 1.6% and 10%, respectively, of the corresponding European values, despite much higher emissions in south Asia. Using an inventory for BC emissions from forest fires, BC source contributions to the Arctic, particularly from fires in Siberia, were larger than anthropogenic BC source contributions in summer in years of average burning.

This paper proposes an overarching review of national municipal waste management systems and waste-to-energy as an important part of it in the context of circular economy in the selected countries in Europe. The growth of population and rising standards of living means that the consumption of goods and energy is increasing. On the one hand, consumption leads to an increase in the generation of waste. On the other hand, the correlation between increased wealth and increased energy consumption is very strong as well. Given that the average heating value of municipal solid waste (MSW) is approximately 10 MJ/kg, it seems logical to use waste as a source of energy. Traditionally, waste-to-energy (WtE) has been associated with incineration. Yet, the term is much broader, embracing various waste treatment processes generating energy (for instance, in the form of electricity and/or heat or producing a waste-derived fuel). Turning waste into energy can be one key to a circular economy enabling the value of products, materials, and resources to be maintained on the market for as long as possible, minimising waste and resource use. As the circular economy is at the top of the EU agenda, all Member States of the EU (including the EEA countries) should move away from the old-fashioned disposal of waste to a more intelligent waste treatment encompassing the circular economy approach in their waste policies. Therefore, the article examines how these EU policies are implemented in practice. Given that WtE traditionally is attached to the MSW management and organisation, the focus of this article is twofold. Firstly, it aims to identify the different practices of municipal waste management employed in selected countries and their approaches in embracing the circular economy and, secondly, the extent to which WtE technologies play any role in this context. The following countries, Estonia, Greece, Italy, Latvia, Lithuania, Norway, Poland, Slovenia, Spain, and the UK were chosen to depict a broad European context.

We have performed new calculations of the radiative forcing due to changes in the concentrations of the most important well mixed greenhouse gases (WMGG) since pre‐industrial time. Three radiative transfer models are used. The radiative forcing due to CO 2 , including shortwave absorption, is 15% lower than the previous IPCC estimate. The radiative forcing due to all the WMGG is calculated to 2.25 Wm −2 , which we estimate to be accurate to within about 5%. The importance of the CFCs is increased by about 20% relative to the total effect of all WMGG compared to previous estimates. We present updates to simple forcing‐concentration relationships previously used by IPCC.

Soil salinization has become one of the major environmental and socioeconomic issues globally and this is expected to be exacerbated further with projected climatic change. Determining how climate change influences the dynamics of naturally-occurring soil salinization has scarcely been addressed due to highly complex processes influencing salinization. This paper sets out to address this long-standing challenge by developing data-driven models capable of predicting primary (naturally-occurring) soil salinity and its variations in the world's drylands up to the year 2100 under changing climate. Analysis of the future predictions made here identifies the dryland areas of South America, southern and western Australia, Mexico, southwest United States, and South Africa as the salinization hotspots. Conversely, we project a decrease in the soil salinity of the drylands in the northwest United States, the Horn of Africa, Eastern Europe, Turkmenistan, and west Kazakhstan in response to climate change over the same period.

A global assessment of precipitation chemistry and deposition has been carried out under the direction of the World Meteorological Organization (WMO) Global Atmosphere Watch (GAW) Scientific Advisory Group for Precipitation Chemistry (SAG-PC). The assessment addressed three questions: (1) what do measurements and model estimates of precipitation chemistry and wet, dry and total deposition of sulfur, nitrogen, sea salt, base cations, organic acids, acidity, and phosphorus show globally and regionally? (2) has the wet deposition of major ions changed since 2000 (and, where information and data are available, since 1990) and (3) what are the major gaps and uncertainties in our knowledge? To that end, regionally-representative measurements for two 3-year-averaging periods, 2000–2002 and 2005–2007, were compiled worldwide. Data from the 2000–2002 averaging period were combined with 2001 ensemble-mean modeling results from 21 global chemical transport models produced in Phase 1 of the Coordinated Model Studies Activities of the Task Force on Hemispheric Transport of Air Pollution (TF HTAP). The measurement data and modeling results were used to generate global and regional maps of major ion concentrations in precipitation and deposition. A major product of the assessment is a database of quality assured ion concentration and wet deposition data gathered from regional and national monitoring networks. The database is available for download from the World Data Centre for Precipitation Chemistry (http://wdcpc.org/). The assessment concludes that global concentrations and deposition of sulfur and nitrogen are reasonably well characterized with levels generally highest near emission sources and more than an order of magnitude lower in areas largely free of anthropogenic influences. In many parts of the world, wet deposition of reduced nitrogen exceeds that of oxidized nitrogen and is increasing. Sulfur and nitrogen concentrations and deposition in North America and Europe have declined significantly in line with emission reduction policies. Major regions of the world, including South America, the more remote areas of North America, much of Asia, Africa, Oceania, polar regions, and all of the oceans, are inadequately sampled for all of the major ions in wet and dry deposition, and particularly so for phosphorus, organic forms of nitrogen, and weak acids including carbonates and organic acids. Measurement-based inferential estimates of dry deposition are limited to sulfur and some nitrogen in only a few regions of the world and methods are highly uncertain. The assessment concludes with recommendations to address major gaps and uncertainties in global ion concentration and deposition measurements.

Abstract. libRadtran is a widely used software package for radiative transfer calculations. It allows one to compute (polarized) radiances, irradiance, and actinic fluxes in the solar and thermal spectral regions. libRadtran has been used for various applications, including remote sensing of clouds, aerosols and trace gases in the Earth's atmosphere, climate studies, e.g., for the calculation of radiative forcing due to different atmospheric components, for UV forecasting, the calculation of photolysis frequencies, and for remote sensing of other planets in our solar system. The package has been described in Mayer and Kylling (2005). Since then several new features have been included, for example polarization, Raman scattering, a new molecular gas absorption parameterization, and several new parameterizations of cloud and aerosol optical properties. Furthermore, a graphical user interface is now available, which greatly simplifies the usage of the model, especially for new users. This paper gives an overview of libRadtran version 2.0.1 with a focus on new features. Applications including these new features are provided as examples of use. A complete description of libRadtran and all its input options is given in the user manual included in the libRadtran software package, which is freely available at http://www.libradtran.org.

Abstract. European scale harmonized monitoring of atmospheric composition was initiated in the early 1970s, and the activity has generated a comprehensive dataset (available at http://www.emep.int) which allows the evaluation of regional and spatial trends of air pollution during a period of nearly 40 yr. Results from the monitoring made within EMEP, the European Monitoring and Evaluation Programme, show large reductions in ambient concentrations and deposition of sulphur species during the last decades. Reductions are in the order of 70–90% since the year 1980, and correspond well with reported emission changes. Also reduction in emissions of nitrogen oxides (NOx) are reflected in the measurements, with an average decrease of nitrogen dioxide and nitrate in precipitation by about 23% and 25% respectively since 1990. Only minor reductions are however seen since the late 1990s. The concentrations of total nitrate in air have decreased on average only by 8% since 1990, and fewer sites show a significant trend. A majority of the EMEP sites show a decreasing trend in reduced nitrogen both in air and precipitation on the order of 25% since 1990. Deposition of base cations has decreased during the past 30 yr, and the pH in precipitation has increased across Europe. Large inter annual variations in the particulate matter mass concentrations reflect meteorological variability, but still there is a relatively clear overall decrease at several sites during the last decade. With few observations going back to the 1990s, the observed chemical composition is applied to document a change in particulate matter (PM) mass even since 1980. These data indicate an overall reduction of about 5 μg m−3 from sulphate alone. Despite the significant reductions in sulphur emissions, sulphate still remains one of the single most important compounds contributing to regional scale aerosol mass concentration. Long-term ozone trends at EMEP sites show a mixed pattern. The year-to-year variability in ozone due to varying meteorological conditions is substantial, making it hard to separate the trends caused by emission change from other effects. For the Nordic countries the data indicate a reduced occurrence of very low concentrations. The most pronounced change in the frequency distribution is seen at sites in the UK and the Netherlands, showing a reduction in the higher values. Smaller changes are seen in Germany, while in Switzerland and Austria, no change is seen in the frequency distribution of ozone. The lack of long-term data series is a major obstacle for studying trends in volatile organic compounds (VOC). The scatter in the data is large, and significant changes are only found for certain components and stations. Concentrations of the heavy metals lead and cadmium have decreased in both air and precipitation during the last 20 yr, with reductions in the order of 80–90% for Pb and 64–84% for Cd (precipitation and air respectively). The measurements of total gaseous mercury indicate a dramatic decrease in concentrations during 1980 to about 1993. Trends in hexachlorocyclohexanes (HCHs) show a significant decrease in annual average air concentrations. For other persistent organic pollutants (POPs) the patterns is mixed, and differs between sites and between measurements in air versus precipitation.

Abstract Atmospheric methane grew very rapidly in 2014 (12.7 ± 0.5 ppb/year), 2015 (10.1 ± 0.7 ppb/year), 2016 (7.0 ± 0.7 ppb/year), and 2017 (7.7 ± 0.7 ppb/year), at rates not observed since the 1980s. The increase in the methane burden began in 2007, with the mean global mole fraction in remote surface background air rising from about 1,775 ppb in 2006 to 1,850 ppb in 2017. Simultaneously the 13 C/ 12 C isotopic ratio (expressed as δ 13 C CH4 ) has shifted, now trending negative for more than a decade. The causes of methane's recent mole fraction increase are therefore either a change in the relative proportions (and totals) of emissions from biogenic and thermogenic and pyrogenic sources, especially in the tropics and subtropics, or a decline in the atmospheric sink of methane, or both. Unfortunately, with limited measurement data sets, it is not currently possible to be more definitive. The climate warming impact of the observed methane increase over the past decade, if continued at >5 ppb/year in the coming decades, is sufficient to challenge the Paris Agreement, which requires sharp cuts in the atmospheric methane burden. However, anthropogenic methane emissions are relatively very large and thus offer attractive targets for rapid reduction, which are essential if the Paris Agreement aims are to be attained.