NobleBlocks

Rede de Química e Tecnologia

nonprofitPorto, Portugal

Research output, citation impact, and the most-cited recent papers from Rede de Química e Tecnologia (Portugal). Aggregated across the NobleBlocks index of 300M+ scholarly works.

Total works
21.9K
Citations
1.9M
h-index
334
i10-index
35.4K
Also known as
Rede de Química e Tecnologia

Top-cited papers from Rede de Química e Tecnologia

The Global Burden of Cancer 2013
Christina Fitzmaurice, Daniel Dicker, Amanda Pain, Hannah Hamavid +4 more
2015· JAMA Oncology2.8Kdoi:10.1001/jamaoncol.2015.0735

IMPORTANCE: Cancer is among the leading causes of death worldwide. Current estimates of cancer burden in individual countries and regions are necessary to inform local cancer control strategies. OBJECTIVE: To estimate mortality, incidence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs) for 28 cancers in 188 countries by sex from 1990 to 2013. EVIDENCE REVIEW: The general methodology of the Global Burden of Disease (GBD) 2013 study was used. Cancer registries were the source for cancer incidence data as well as mortality incidence (MI) ratios. Sources for cause of death data include vital registration system data, verbal autopsy studies, and other sources. The MI ratios were used to transform incidence data to mortality estimates and cause of death estimates to incidence estimates. Cancer prevalence was estimated using MI ratios as surrogates for survival data; YLDs were calculated by multiplying prevalence estimates with disability weights, which were derived from population-based surveys; YLLs were computed by multiplying the number of estimated cancer deaths at each age with a reference life expectancy; and DALYs were calculated as the sum of YLDs and YLLs. FINDINGS: In 2013 there were 14.9 million incident cancer cases, 8.2 million deaths, and 196.3 million DALYs. Prostate cancer was the leading cause for cancer incidence (1.4 million) for men and breast cancer for women (1.8 million). Tracheal, bronchus, and lung (TBL) cancer was the leading cause for cancer death in men and women, with 1.6 million deaths. For men, TBL cancer was the leading cause of DALYs (24.9 million). For women, breast cancer was the leading cause of DALYs (13.1 million). Age-standardized incidence rates (ASIRs) per 100 000 and age-standardized death rates (ASDRs) per 100 000 for both sexes in 2013 were higher in developing vs developed countries for stomach cancer (ASIR, 17 vs 14; ASDR, 15 vs 11), liver cancer (ASIR, 15 vs 7; ASDR, 16 vs 7), esophageal cancer (ASIR, 9 vs 4; ASDR, 9 vs 4), cervical cancer (ASIR, 8 vs 5; ASDR, 4 vs 2), lip and oral cavity cancer (ASIR, 7 vs 6; ASDR, 2 vs 2), and nasopharyngeal cancer (ASIR, 1.5 vs 0.4; ASDR, 1.2 vs 0.3). Between 1990 and 2013, ASIRs for all cancers combined (except nonmelanoma skin cancer and Kaposi sarcoma) increased by more than 10% in 113 countries and decreased by more than 10% in 12 of 188 countries. CONCLUSIONS AND RELEVANCE: Cancer poses a major threat to public health worldwide, and incidence rates have increased in most countries since 1990. The trend is a particular threat to developing nations with health systems that are ill-equipped to deal with complex and expensive cancer treatments. The annual update on the Global Burden of Cancer will provide all stakeholders with timely estimates to guide policy efforts in cancer prevention, screening, treatment, and palliation.

Global, Regional, and National Cancer Incidence, Mortality, Years of Life Lost, Years Lived With Disability, and Disability-Adjusted Life-Years for 29 Cancer Groups, 1990 to 2017
Christina Fitzmaurice, Degu Abate, Naghmeh Abbasi, Hedayat Abbastabar +4 more
2019· JAMA Oncology2.7Kdoi:10.1001/jamaoncol.2019.2996

<h3>Importance</h3> Cancer and other noncommunicable diseases (NCDs) are now widely recognized as a threat to global development. The latest United Nations high-level meeting on NCDs reaffirmed this observation and also highlighted the slow progress in meeting the 2011 Political Declaration on the Prevention and Control of Noncommunicable Diseases and the third Sustainable Development Goal. Lack of situational analyses, priority setting, and budgeting have been identified as major obstacles in achieving these goals. All of these have in common that they require information on the local cancer epidemiology. The Global Burden of Disease (GBD) study is uniquely poised to provide these crucial data. <h3>Objective</h3> To describe cancer burden for 29 cancer groups in 195 countries from 1990 through 2017 to provide data needed for cancer control planning. <h3>Evidence Review</h3> We used the GBD study estimation methods to describe cancer incidence, mortality, years lived with disability, years of life lost, and disability-adjusted life-years (DALYs). Results are presented at the national level as well as by Socio-demographic Index (SDI), a composite indicator of income, educational attainment, and total fertility rate. We also analyzed the influence of the epidemiological vs the demographic transition on cancer incidence. <h3>Findings</h3> In 2017, there were 24.5 million incident cancer cases worldwide (16.8 million without nonmelanoma skin cancer [NMSC]) and 9.6 million cancer deaths. The majority of cancer DALYs came from years of life lost (97%), and only 3% came from years lived with disability. The odds of developing cancer were the lowest in the low SDI quintile (1 in 7) and the highest in the high SDI quintile (1 in 2) for both sexes. In 2017, the most common incident cancers in men were NMSC (4.3 million incident cases); tracheal, bronchus, and lung (TBL) cancer (1.5 million incident cases); and prostate cancer (1.3 million incident cases). The most common causes of cancer deaths and DALYs for men were TBL cancer (1.3 million deaths and 28.4 million DALYs), liver cancer (572 000 deaths and 15.2 million DALYs), and stomach cancer (542 000 deaths and 12.2 million DALYs). For women in 2017, the most common incident cancers were NMSC (3.3 million incident cases), breast cancer (1.9 million incident cases), and colorectal cancer (819 000 incident cases). The leading causes of cancer deaths and DALYs for women were breast cancer (601 000 deaths and 17.4 million DALYs), TBL cancer (596 000 deaths and 12.6 million DALYs), and colorectal cancer (414 000 deaths and 8.3 million DALYs). <h3>Conclusions and Relevance</h3> The national epidemiological profiles of cancer burden in the GBD study show large heterogeneities, which are a reflection of different exposures to risk factors, economic settings, lifestyles, and access to care and screening. The GBD study can be used by policy makers and other stakeholders to develop and improve national and local cancer control in order to achieve the global targets and improve equity in cancer care.

Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)<sup>1</sup>
Daniel J. Klionsky, Amal Kamal Abdel‐Aziz, Sara Abdelfatah, Mahmoud Abdellatif +4 more
2021· Autophagy2.6Kdoi:10.1080/15548627.2020.1797280

autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.

Natural Deep Eutectic Solvents – Solvents for the 21st Century
Alexandre Paiva, Rita Craveiro, Ivo M. Aroso, Marta Martins +2 more
2014· ACS Sustainable Chemistry & Engineering2.3Kdoi:10.1021/sc500096j

Green technology is actively seeking for new solvents able to replace common organic solvents which present inherent toxicity and have a high volatility, leading to the evaporation of volatile organic compounds to the atmosphere. Over the past two decades, ionic liquids (ILs) have gained enormous attention from the scientific community and the number of reported articles in the literature has grown exponentially. Nevertheless IL “greenness” is often challenged, mainly due to their poor biodegradability, biocompatibility and sustainability. An alternative to ILs are Deep Eutectic solvents (DES). Deep eutectic solvents are defined as a mixture of two solid components, which at a particular composition present a high melting point depression becoming liquids at room temperature. When the compounds that constitute the DES are primary metabolites, namely, aminoacids, organic acids, sugars or choline derivatives, DES are so- called natural deep eutectic solvents (NADES). NADES fully represent the green chemistry principles. Can natural deep eutectic solvents be foreseen as the next generation solvents and can a similar path to ionic liquids be outlined? The current state of the art concerning the advances made on these solvents in the past few years is reviewed in this Account. More than an overview on the different applications for which they have been suggested, particularly, biocatalysis, electrochemistry, extraction new data is presented in this work. Citotoxicity of different NADES was evaluated and compared to conventional imidazolim based ionic liquids and hints on the extraction of phenolic compounds from green coffee bean and on the foaming effect of NADES are revealed. Future perspectives on the major directions towards which the research on NADES is envisaged are here discussed and these comprised undoubtedly a wide range of chemical related subjects.

The Burden of Primary Liver Cancer and Underlying Etiologies From 1990 to 2015 at the Global, Regional, and National Level
Tomi Akinyemiju, Semaw Ferede Abera, Muktar Beshir Ahmed, Noore Alam +4 more
2017· JAMA Oncology2.0Kdoi:10.1001/jamaoncol.2017.3055

<h3>Importance</h3> Liver cancer is among the leading causes of cancer deaths globally. The most common causes for liver cancer include hepatitis B virus (HBV) and hepatitis C virus (HCV) infection and alcohol use. <h3>Objective</h3> To report results of the Global Burden of Disease (GBD) 2015 study on primary liver cancer incidence, mortality, and disability-adjusted life-years (DALYs) for 195 countries or territories from 1990 to 2015, and present global, regional, and national estimates on the burden of liver cancer attributable to HBV, HCV, alcohol, and an “other” group that encompasses residual causes. <h3>Design, Settings, and Participants</h3> Mortality was estimated using vital registration and cancer registry data in an ensemble modeling approach. Single-cause mortality estimates were adjusted for all-cause mortality. Incidence was derived from mortality estimates and the mortality-to-incidence ratio. Through a systematic literature review, data on the proportions of liver cancer due to HBV, HCV, alcohol, and other causes were identified. Years of life lost were calculated by multiplying each death by a standard life expectancy. Prevalence was estimated using mortality-to-incidence ratio as surrogate for survival. Total prevalence was divided into 4 sequelae that were multiplied by disability weights to derive years lived with disability (YLDs). DALYs were the sum of years of life lost and YLDs. <h3>Main Outcomes and Measures</h3> Liver cancer mortality, incidence, YLDs, years of life lost, DALYs by etiology, age, sex, country, and year. <h3>Results</h3> There were 854 000 incident cases of liver cancer and 810 000 deaths globally in 2015, contributing to 20 578 000 DALYs. Cases of incident liver cancer increased by 75% between 1990 and 2015, of which 47% can be explained by changing population age structures, 35% by population growth, and −8% to changing age-specific incidence rates. The male-to-female ratio for age-standardized liver cancer mortality was 2.8. Globally, HBV accounted for 265 000 liver cancer deaths (33%), alcohol for 245 000 (30%), HCV for 167 000 (21%), and other causes for 133 000 (16%) deaths, with substantial variation between countries in the underlying etiologies. <h3>Conclusions and Relevance</h3> Liver cancer is among the leading causes of cancer deaths in many countries. Causes of liver cancer differ widely among populations. Our results show that most cases of liver cancer can be prevented through vaccination, antiviral treatment, safe blood transfusion and injection practices, as well as interventions to reduce excessive alcohol use. In line with the Sustainable Development Goals, the identification and elimination of risk factors for liver cancer will be required to achieve a sustained reduction in liver cancer burden. The GBD study can be used to guide these prevention efforts.

Global, Regional, and National Cancer Incidence, Mortality, Years of Life Lost, Years Lived With Disability, and Disability-Adjusted Life-Years for 29 Cancer Groups, 1990 to 2016
Christina Fitzmaurice, Tomi Akinyemiju, Faris Lami, Shazia Alam +4 more
2018· JAMA Oncology1.5Kdoi:10.1001/jamaoncol.2018.2706

Importance: The increasing burden due to cancer and other noncommunicable diseases poses a threat to human development, which has resulted in global political commitments reflected in the Sustainable Development Goals as well as the World Health Organization (WHO) Global Action Plan on Non-Communicable Diseases. To determine if these commitments have resulted in improved cancer control, quantitative assessments of the cancer burden are required. Objective: To assess the burden for 29 cancer groups over time to provide a framework for policy discussion, resource allocation, and research focus. Evidence Review: Cancer incidence, mortality, years lived with disability, years of life lost, and disability-adjusted life-years (DALYs) were evaluated for 195 countries and territories by age and sex using the Global Burden of Disease study estimation methods. Levels and trends were analyzed over time, as well as by the Sociodemographic Index (SDI). Changes in incident cases were categorized by changes due to epidemiological vs demographic transition. Findings: In 2016, there were 17.2 million cancer cases worldwide and 8.9 million deaths. Cancer cases increased by 28% between 2006 and 2016. The smallest increase was seen in high SDI countries. Globally, population aging contributed 17%; population growth, 12%; and changes in age-specific rates, -1% to this change. The most common incident cancer globally for men was prostate cancer (1.4 million cases). The leading cause of cancer deaths and DALYs was tracheal, bronchus, and lung cancer (1.2 million deaths and 25.4 million DALYs). For women, the most common incident cancer and the leading cause of cancer deaths and DALYs was breast cancer (1.7 million incident cases, 535 000 deaths, and 14.9 million DALYs). In 2016, cancer caused 213.2 million DALYs globally for both sexes combined. Between 2006 and 2016, the average annual age-standardized incidence rates for all cancers combined increased in 130 of 195 countries or territories, and the average annual age-standardized death rates decreased within that timeframe in 143 of 195 countries or territories. Conclusions and Relevance: Large disparities exist between countries in cancer incidence, deaths, and associated disability. Scaling up cancer prevention and ensuring universal access to cancer care are required for health equity and to fulfill the global commitments for noncommunicable disease and cancer control.

Plant Flavonoids: Chemical Characteristics and Biological Activity
Maria Celeste Dias, Diana C. G. A. Pinto, Artur M. S. Silva
2021· Molecules1.4Kdoi:10.3390/molecules26175377

In recent years, more attention has been paid to natural sources of antioxidants. Flavonoids are natural substances synthesized in several parts of plants that exhibit a high antioxidant capacity. They are a large family, presenting several classes based on their basic structure. Flavonoids have the ability to control the accumulation of reactive oxygen species (ROS) via scavenger ROS when they are formed. Therefore, these antioxidant compounds have an important role in plant stress tolerance and a high relevance in human health, mainly due to their anti-inflammatory and antimicrobial properties. In addition, flavonoids have several applications in the food industry as preservatives, pigments, and antioxidants, as well as in other industries such as cosmetics and pharmaceuticals. However, flavonoids application for industrial purposes implies extraction processes with high purity and quality. Several methodologies have been developed aimed at increasing flavonoid extraction yield and being environmentally friendly. This review presents the most abundant natural flavonoids, their structure and chemical characteristics, extraction methods, and biological activity.

Covalent organic frameworks based on Schiff-base chemistry: synthesis, properties and potential applications
José L. Segura, María J. Mancheño, Félix Zamora
2016· Chemical Society Reviews1.4Kdoi:10.1039/c5cs00878f

Covalent organic-frameworks (COFs) are an emerging class of porous and ordered materials formed by condensation reactions of organic molecules. Recently, the Schiff-base chemistry or dynamic imine-chemistry has been widely explored for the synthesis of COFs. The main reason for this new tendency is based on their high chemical stability, porosity and crystallinity in comparison to previously reported COFs. This critical review article summarizes the current state-of-the-art on the design principles and synthetic strategies toward COFs based on Schiff-base chemistry, collects and rationalizes their physicochemical properties, as well as aims to provide perspectives of potential applications which are at the forefront of research in materials science.

Nano-magnetite (Fe3O4) as a support for recyclable catalysts in the development of sustainable methodologies
Manoj B. Gawande, Paula S. Branco, Rajender S. Varma
2013· Chemical Society Reviews1.2Kdoi:10.1039/c3cs35480f

Surface functionalization of nano-magnetic nanoparticles is a well-designed way to bridge the gap between heterogeneous and homogeneous catalysis. The introduction of magnetic nanoparticles (MNPs) in a variety of solid matrices allows the combination of well-known procedures for catalyst heterogenization with techniques for magnetic separation. Magnetite is a well-known material, also known as ferrite (Fe3O4), and can be used as a versatile support for functionalization of metals, organocatalysts, N-heterocyclic carbenes, and chiral catalysts. It is used as a support for important homogeneous catalytically active metals such as Pd, Pt, Cu, Ni, Co, Ir, etc. to obtain stable and magnetically recyclable heterogeneous catalysts. Homogeneous organocatalysts can be successfully decorated with linkers/ligands on the surface of magnetite or alternatively the organocatalysts can be directly immobilized on the surface of magnetite. The functionalized magnetically retrievable catalysts or nanocatalysts that are increasingly being used in catalysis, green chemistry and pharmaceutically significant reactions are summarized in this review.

LOSITAN: A workbench to detect molecular adaptation based on a F st -outlier method
Tiago Antão, Ana Lúcia Lopes, Ricardo J. Lopes, Albano Beja‐Pereira +1 more
2008· BMC Bioinformatics1.1Kdoi:10.1186/1471-2105-9-323

Testing for selection is becoming one of the most important steps in the analysis of multilocus population genetics data sets. Existing applications are difficult to use, leaving many non-trivial, error-prone tasks to the user. Here we present LOSITAN, a selection detection workbench based on a well evaluated F st -outlier detection method. LOSITAN greatly facilitates correct approximation of model parameters (e.g., genome-wide average, neutral F st ), provides data import and export functions, iterative contour smoothing and generation of graphics in a easy to use graphical user interface. LOSITAN is able to use modern multi-core processor architectures by locally parallelizing fdist, reducing computation time by half in current dual core machines and with almost linear performance gains in machines with more cores. LOSITAN makes selection detection feasible to a much wider range of users, even for large population genomic datasets, by both providing an easy to use interface and essential functionality to complete the whole selection detection process.

State of the art paper Biochemistry of adipose tissue: an endocrine organ
Marisa Coelho, Teresa Oliveira, Rúben Fernandes
2013· Archives of Medical Science1.1Kdoi:10.5114/aoms.2013.33181

Adipose tissue is no longer considered to be an inert tissue that stores fat. This tissue is capable of expanding to accommodate increased lipids through hypertrophy of existing adipocytes and by initiating differentiation of pre-adipocytes. Adipose tissue metabolism exerts an impact on whole-body metabolism. As an endocrine organ, adipose tissue is responsible for the synthesis and secretion of several hormones. These are active in a range of processes, such as control of nutritional intake (leptin, angiotensin), control of sensitivity to insulin and inflammatory process mediators (tumor necrosis factor α (TNF-α), interleukin-6 (IL-6), resistin, visfatin, adiponectin, among others) and pathways (plasminogen activator inhibitor 1 (PAI-1) and acylation stimulating protein (ASP) for example). This paper reviews some of the biochemical and metabolic aspects of adipose tissue and its relationship to inflammatory disease and insulin resistance.

General Performance of Density Functionals
Sérgio F. Sousa, Pedro Alexandrino Fernandes, Maria J. Ramos
2007· The Journal of Physical Chemistry A1.0Kdoi:10.1021/jp0734474

The density functional theory (DFT) foundations date from the 1920s with the work of Thomas and Fermi, but it was after the work of Hohenberg, Kohn, and Sham in the 1960s, and particularly with the appearance of the B3LYP functional in the early 1990s, that the widespread application of DFT has become a reality. DFT is less computationally demanding than other computational methods with a similar accuracy, being able to include electron correlation in the calculations at a fraction of time of post-Hartree-Fock methodologies. In this review we provide a brief outline of the density functional theory and of the historic development of the field, focusing later on the several types of density functionals currently available, and finishing with a detailed analysis of the performance of DFT across a wide range of chemical properties and system types, reviewed from the most recent benchmarking studies, which encompass several well-established density functionals together with the most recent efforts in the field. Globally, an overall picture of the level of performance of the plethora of currently available density functionals for each chemical property is drawn, with particular attention being dedicated to the relative performance of the popular B3LYP density functional.

Protein–ligand docking: Current status and future challenges
Sérgio F. Sousa, Pedro Alexandrino Fernandes, Maria J. Ramos
2006· Proteins Structure Function and Bioinformatics1.0Kdoi:10.1002/prot.21082

Understanding the ruling principles whereby protein receptors recognize, interact, and associate with molecular substrates and inhibitors is of paramount importance in drug discovery efforts. Protein-ligand docking aims to predict and rank the structure(s) arising from the association between a given ligand and a target protein of known 3D structure. Despite the breathtaking advances in the field over the last decades and the widespread application of docking methods, several downsides still exist. In particular, protein flexibility-a critical aspect for a thorough understanding of the principles that guide ligand binding in proteins-is a major hurdle in current protein-ligand docking efforts that needs to be more efficiently accounted for. In this review the key concepts of protein-ligand docking methods are outlined, with major emphasis being given to the general strengths and weaknesses that presently characterize this methodology. Despite the size of the field, the principal types of search algorithms and scoring functions are reviewed and the most popular docking tools are briefly depicted. Recent advances that aim to address some of the traditional limitations associated with molecular docking are also described. A selection of hand-picked examples is used to illustrate these features.

Simple Coumarins and Analogues in Medicinal Chemistry: Occurrence, Synthesis and Biological Activity
Fernanda Borges, Fernanda M.F. Roleira, Nuno Milhazes, Lourdes Santana +1 more
2005· Current Medicinal Chemistry978doi:10.2174/0929867053507315

Coumarins, also known as benzopyrones, are present in remarkable amounts in plants, although their presence has also been detected in microorganisms and animal sources. The structural diversity found in this family of compounds led to the division into different categories, from simple coumarins to many other kinds of policyclic coumarins, such as furocoumarins and pyranocoumarins. Simple coumarins and analogues are a large class of compounds that have attracted their interest for a long time due to their biological activities: they have shown to be useful as antitumoural, anti-HIV agents and as CNS-active compounds. Furthermore, they have been reported to have multiple biological activities (anticoagulant, anti-inflammatory), although all these properties have not been evaluated systematically. In addition, their enzyme inhibition properties, antimicrobial and antioxidant activities are other foremost topics of this field of research. The present work is to survey the information published or abstracted from 1990 till 2003, which is mainly related to the occurrence, synthesis and biological importance of simple coumarins and some analogues, such as biscoumarins and triscoumarins. Data are also highlighted, concerning the development of new synthetic strategies that could help in drug design and in the work on SAR or QSAR.

Paraquat Poisonings: Mechanisms of Lung Toxicity, Clinical Features, and Treatment
Ricardo Jorge Dinis‐Oliveira, José Alberto Duarte, Amparo Sánchez Navarro, Fernando Remião +2 more
2007· Critical Reviews in Toxicology916doi:10.1080/10408440701669959

Paraquat dichloride (methyl viologen; PQ) is an effective and widely used herbicide that has a proven safety record when appropriately applied to eliminate weeds. However, over the last decades, there have been numerous fatalities, mainly caused by accidental or voluntary ingestion. PQ poisoning is an extremely frustrating condition to manage clinically, due to the elevated morbidity and mortality observed so far and due to the lack of effective treatments to be used in humans. PQ mainly accumulates in the lung (pulmonary concentrations can be 6 to 10 times higher than those in the plasma), where it is retained even when blood levels start to decrease. The pulmonary effects can be explained by the participation of the polyamine transport system abundantly expressed in the membrane of alveolar cells type I, II, and Clara cells. Further downstream at the toxicodynamic level, the main molecular mechanism of PQ toxicity is based on redox cycling and intracellular oxidative stress generation. With this review we aimed to collect and describe the most pertinent and significant findings published in established scientific publications since the discovery of PQ, focusing on the most recent developments related to PQ lung toxicity and their relevance to the treatment of human poisonings. Considerable space is also dedicated to techniques for prognosis prediction, since these could allow development of rigorous clinical protocols that may produce comparable data for the evaluation of proposed therapies.

Disposable Sensors in Diagnostics, Food, and Environmental Monitoring
Can Dincer, Richard C. Bruch, Estefanía Costa‐Rama, M. Teresa Fernández‐Abedul +4 more
2019· Advanced Materials911doi:10.1002/adma.201806739

Disposable sensors are low-cost and easy-to-use sensing devices intended for short-term or rapid single-point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource-limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo- and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low-cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities.

Microplastics in wild fish from North East Atlantic Ocean and its potential for causing neurotoxic effects, lipid oxidative damage, and human health risks associated with ingestion exposure
Luís Gabriel A. Barboza, Clara Lopes, Patrícia Oliveira, Filipa Bessa +4 more
2019· The Science of The Total Environment890doi:10.1016/j.scitotenv.2019.134625

Microplastics (MP) pollution has received increased attention over the last few years. However, while the number of studies documentating the ingestion of microplastics by fish has increased, fewer studies have addressed the toxicological effects derived from the ingestion of these small items in wild conditions. Here, MP contamination and effect biomarkers were investigated in three commercially important fish species from the North East Atlantic Ocean. From the 150 analysed fish (50 per species), 49 % had MP. In fish from the 3 species, MP in the gastrointestinal tract, gills and dorsal muscle were found. Fish with MP had significantly (p ≤ 0.05) higher lipid peroxidation levels in the brain, gills and dorsal muscle, and increased brain acetylcholinesterase activity than fish where no MP were found. These results suggest lipid oxidative damage in gills and muscle, and neurotoxicity through lipid oxidative damage and acetylcholinesterase induction in relation to MP and/or MP-associated chemicals exposure. From the 150 fish analysed, 32 % had MP in dorsal muscle, with a total mean (± SD) of 0.054 ± 0.099 MP items/g. Based on this mean and on EFSA recommendation for fish consumption by adults or the general population, human consumers of Dicentrachus labrax, Trachurus trachurus, Scomber colias may intake 842 MP items/year from fish consumption only. Based on the mean of MP in fish muscle and data (EUMOFA, NOAA) of fish consumption per capita in selected European and American countries, the estimated intake of microplastics through fish consumption ranged from 518 to 3078 MP items/year/capita. Considering that fish consumption is only one of the routes of human exposure to microplastics, this study and others in the literature emphasize the need for more research, risk assessment and adoption of measures to minimize human exposure to these particles. Thus, MP pollution and its effects should be further investigated and addressed according to the WHO 'One Health' approach.

Analysis of Fossil Fuel Energy Consumption and Environmental Impacts in European Countries
Florinda Martins, Carlos Felgueiras, Miroslava Farkas Smitkova, Nídia S. Caetano
2019· Energies881doi:10.3390/en12060964

The use of fossil fuels as the main source of energy for most countries has caused several negative environmental impacts, such as global warming and air pollution. Air pollution causes many health problems, causing social and economic negative effects. Worldwide efforts are being made to avoid global warming consequences through the establishment of international agreements that then lead to local policies adapted to the development of each signing nation. In addition, there is a depletion of nonrenewable resources which may be scarce or nonexistent in future generations. The preservation of resources, which is a common goal of the Circular Economy strategy and of sustainable development, is not being accomplished nowadays. In this work, the calculation of indicators and mathematical and statistical analysis were applied to clarify and evidence the trends, provide information for the decision-making process, and increase public awareness. The fact that European countries do not possess abundant reserves of fossil fuels will not change, but the results of this analysis can evolve in the future. In this work, fossil fuel energy consumption, fossil fuel depletion, and their relationship with other variables, such as energy dependence and share of renewable energy in gross final energy consumption, were analyzed for 29 European countries. Furthermore, it was possible to conclude that many European countries still depend heavily on fossil fuels. Significant differences were not found in what concerns gross inland consumption per capita when the Kruskal–Wallis test was applied. It was possible to estimate that by 2050 (considering Jazz scenario) it will only remain approximately 14% of oil proven reserves, 72% of coal proven reserves and 18% of gas proven reserves. Given the small reserves of European countries on fossil fuels, if they need to use them, they will fast disappear.

Ionic Liquid-Mediated Formation of 5-Hydroxymethylfurfural—A Promising Biomass-Derived Building Block
Małgorzata E. Zakrzewska, Ewa Bogel‐Łukasik, Rafał Bogel‐Łukasik
2010· Chemical Reviews789doi:10.1021/cr100171a

ADVERTISEMENT RETURN TO ISSUEPREVReviewNEXTIonic Liquid-Mediated Formation of 5-Hydroxymethylfurfural—A Promising Biomass-Derived Building BlockMałgorzata E. Zakrzewska†, Ewa Bogel-Łukasik†, and Rafał Bogel-Łukasik*†‡View Author Information REQUIMTE, Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal, and Laboratório Nacional de Energia e Geologia, I.P., Unit of Bioenergy, Estrada do Paço do Lumiar 22, 1649-038 Lisboa, Portugal* Fax: +351217163636. Telephone: +351210924600 ext 4224. E-mail: [email protected]†Universidade Nova de Lisboa.‡Laboratório Nacional de Energia e Geologia.Cite this: Chem. Rev. 2011, 111, 2, 397–417Publication Date (Web):October 25, 2010Publication History Received2 June 2010Published online25 October 2010Published inissue 9 February 2011https://pubs.acs.org/doi/10.1021/cr100171ahttps://doi.org/10.1021/cr100171areview-articleACS PublicationsCopyright © 2010 American Chemical SocietyRequest reuse permissionsArticle Views8807Altmetric-Citations718LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Anions,Carbohydrates,Catalysts,Salts,Solvents Get e-Alerts

Post-synthetic modification of covalent organic frameworks
José L. Segura, Sergio Royuela, Mar Ramos
2019· Chemical Society Reviews788doi:10.1039/c8cs00978c

Covalent organic frameworks (COFs) are organic porous materials with many potential applications, which very often depend on the presence of chemical functionality at the organic building blocks. Functionality that cannot be introduced into COFs directly via de novo syntheses can be accessed through post-synthetic modification (PSM) strategies. Current strategies for the post-synthetic modification of COFs involve (i) incorporation of a variety of active metal species by using metal complexation through coordination chemistry, (ii) covalent bond formation between existing pendant groups and incoming constituents and (iii) chemical conversion of linkages. (iv) The post-synthetic modification is sometimes assisted by a monomer truncation strategy for the internal functionalization of COFs. (v) Even more intriguing methods that go beyond PSM are herein termed building block exchange (BBE) which encompasses framework-to-framework transformations taking advantage of the fact that reversible bond formation is a characteristic feature of COFs. This strategy allows the use of protoCOF structures (i.e., the utilization of a parent COF as a template) for the evolution of new COF structures with completely new components.