Sécurité et Qualité des Produits d'Origine Végétale

Simulated gastro-intestinal digestion is widely employed in many fields of food and nutritional sciences, as conducting human trials are often costly, resource intensive, and ethically disputable. As a consequence, in vitro alternatives that determine endpoints such as the bioaccessibility of nutrients and non-nutrients or the digestibility of macronutrients (e.g. lipids, proteins and carbohydrates) are used for screening and building new hypotheses. Various digestion models have been proposed, often impeding the possibility to compare results across research teams. For example, a large variety of enzymes from different sources such as of porcine, rabbit or human origin have been used, differing in their activity and characterization. Differences in pH, mineral type, ionic strength and digestion time, which alter enzyme activity and other phenomena, may also considerably alter results. Other parameters such as the presence of phospholipids, individual enzymes such as gastric lipase and digestive emulsifiers vs. their mixtures (e.g. pancreatin and bile salts), and the ratio of food bolus to digestive fluids, have also been discussed at length. In the present consensus paper, within the COST Infogest network, we propose a general standardised and practical static digestion method based on physiologically relevant conditions that can be applied for various endpoints, which may be amended to accommodate further specific requirements. A frameset of parameters including the oral, gastric and small intestinal digestion are outlined and their relevance discussed in relation to available in vivo data and enzymes. This consensus paper will give a detailed protocol and a line-by-line, guidance, recommendations and justifications but also limitation of the proposed model. This harmonised static, in vitro digestion method for food should aid the production of more comparable data in the future.

Developing a mechanistic understanding of the impact of food structure and composition on human health has increasingly involved simulating digestion in the upper gastrointestinal tract. These simulations have used a wide range of different conditions that often have very little physiological relevance, and this impedes the meaningful comparison of results. The standardized protocol presented here is based on an international consensus developed by the COST INFOGEST network. The method is designed to be used with standard laboratory equipment and requires limited experience to encourage a wide range of researchers to adopt it. It is a static digestion method that uses constant ratios of meal to digestive fluids and a constant pH for each step of digestion. This makes the method simple to use but not suitable for simulating digestion kinetics. Using this method, food samples are subjected to sequential oral, gastric and intestinal digestion while parameters such as electrolytes, enzymes, bile, dilution, pH and time of digestion are based on available physiological data. This amended and improved digestion method (INFOGEST 2.0) avoids challenges associated with the original method, such as the inclusion of the oral phase and the use of gastric lipase. The method can be used to assess the endpoints resulting from digestion of foods by analyzing the digestion products (e.g., peptides/amino acids, fatty acids, simple sugars) and evaluating the release of micronutrients from the food matrix. The whole protocol can be completed in ~7 d, including ~5 d required for the determination of enzyme activities.

Non-covalent and covalent associations of polyphenols with food macromolecules are two of the most fundamental factors affecting the quality of polyphenol-rich food products. This review therefore describes the biochemical bases of associations between polyphenols and macromolecules, that is, proteins and polysaccharides. Our intent is to provide a level of understanding that can be used to underpin future research directions. This will help to resolve existing issues that limit organoleptic and nutritional qualities of polyphenol-rich foods and drinks. It will also allow a better understanding of the functional consequences of these interactions on food/biological systems. The methods used to study non-covalent and covalent interactions are described, and the limiting factors of each method are emphasized. The biochemical mechanisms of interaction between polyphenols and macromolecules are also described. In processed food, non-covalent polyphenol/macromolecule interactions are largely due to weak associations, and result from a combination of hydrogen bonds and hydrophobic interactions. The biochemical mechanisms for covalent interactions involve oxidation of phenolic compounds, whether enzymatically mediated or not, with the formation of o-quinones or o-semi-quinones, or the cleavage of procyanidin interflavanic bonds in acid medium with the formation of carbocations. The effects of factors such as polyphenol structure, macromolecule structure, relative concentrations of both polyphenol and macromolecule, solvent composition, ionic strength, temperature, and pH are discussed.

(1)O(2) (singlet oxygen) is a reactive O(2) species produced from triplet excited chlorophylls in the chloroplasts, especially when plants are exposed to excess light energy. Similarly to other active O(2) species, (1)O(2) has a dual effect: It is toxic, causing oxidation of biomolecules, and it can act as a signal molecule that leads to cell death or to acclimation. Carotenoids are considered to be the main (1)O(2) quenchers in chloroplasts, and we show here that light stress induces the oxidation of the carotenoid β-carotene in Arabidopsis plants, leading to the accumulation of different volatile derivatives. One such compound, β-cyclocitral, was found to induce changes in the expression of a large set of genes that have been identified as (1)O(2) responsive genes. In contrast, β-cyclocitral had little effect on the expression of H(2)O(2) gene markers. β-Cyclocitral-induced reprogramming of gene expression was associated with an increased tolerance to photooxidative stress. The results indicate that β-cyclocitral is a stress signal produced in high light that is able to induce defense mechanisms and represents a likely messenger involved in the (1)O(2) signaling pathway in plants.

Phenolics have been identified and quantified in nine varieties of barley and their corresponding malts as flavan-3-ols, flavonols, phenolic acids and apolar esters. Flavan-3-ols are monomers, (+)-catechin and (−)-epicatechin, and polymers constituted mainly by units of (+)-catechin and (+)-gallocatechin. The most abundant compounds were the dimers procyanidin B3 and prodelphinidin B3. The main trimeric procyanidin was procyanidin C2. After malting, the phenolic content decreased for all varieties. Catechin monomers were the most affected. Beside polyphenols, barley and malt extracts contained other antioxidants: carotenoids (lutein and zeaxanthin) and tocopherols (α, δ and γ). The antioxidant activity was measured using three methods: capacity to react with DPPH. (ARP), inhibition of lipoxygenase activity (LoxI) and inhibition of cooxidation of β-carotene in a linoleate model system (AOP). The inhibition of cooxidation of β-carotene in a linoleate model system did not allow varieties to be discriminated. They all have high antioxidative properties. Using this assay, tocopherols were the best antioxidants. The ARP (antiradical power) was correlated positively with the amount of total flavan-3-ols (r = 0.89) and increased with the degree of polymerisation. The LoxI assay allowed discrimination of the nine varieties of barley and their corresponding malts but was not correlated with any compound, although flavan-3-ols were good inhibitors of lipoxygenase activity. © 1999 Society of Chemical Industry

Natural anthocyanin pigments/dyes and phenolic copigments/co-dyes form noncovalent complexes, which stabilize and modulate (in particular blue, violet, and red) colors in flowers, berries, and food products derived from them (including wines, jams, purees, and syrups). This noncovalent association and their electronic and optical implications constitute the copigmentation phenomenon. Over the past decade, experimental and theoretical studies have enabled a molecular understanding of copigmentation. This review revisits this phenomenon to provide a comprehensive description of the nature of binding (the dispersion and electrostatic components of π-π stacking, the hydrophobic effect, and possible hydrogen-bonding between pigment and copigment) and of spectral modifications occurring in copigmentation complexes, in which charge transfer plays an important role. Particular attention is paid to applications of copigmentation in food chemistry.

In recent years, almost all extraction processes in the perfume, cosmetic, pharmaceutical, food ingredients, nutraceuticals, biofuel and fine chemical industries rely massively on solvents, the majority of which have petroleum origins. The intricate processing steps involved in the industrial extraction cycle makes it increasingly difficult to predict the overall environmental impact; despite the tremendous energy consumption and the substantial usage of solvents, often the yields are indicated in decimals. The ideal alternative solvents suitable for green extraction should have high solvency, high flash points with low toxicity and low environmental impacts, be easily biodegradable, obtained from renewable (non-petrochemical) resources at a reasonable price and should be easy to recycle without any deleterious effect to the environment. Finding the perfect solvent that meets all the aforementioned requirements is a challenging task, thus the decision for the optimum solvent will always be a compromise depending on the process, the plant and the target molecules. The objective of this comprehensive review is to furnish a vivid picture of current knowledge on alternative, green solvents used in laboratories and industries alike for the extraction of natural products focusing on original methods, innovation, protocols, and development of safe products.

Global pollinators, like honeybees, are declining in abundance and diversity, which can adversely affect natural ecosystems and agriculture. Therefore, we tested the current hypotheses describing honeybee losses as a multifactorial syndrome, by investigating integrative effects of an infectious organism and an insecticide on honeybee health. We demonstrated that the interaction between the microsporidia Nosema and a neonicotinoid (imidacloprid) significantly weakened honeybees. In the short term, the combination of both agents caused the highest individual mortality rates and energetic stress. By quantifying the strength of immunity at both the individual and social levels, we showed that neither the haemocyte number nor the phenoloxidase activity of individuals was affected by the different treatments. However, the activity of glucose oxidase, enabling bees to sterilize colony and brood food, was significantly decreased only by the combination of both factors compared with control, Nosema or imidacloprid groups, suggesting a synergistic interaction and in the long term a higher susceptibility of the colony to pathogens. This provides the first evidences that interaction between an infectious organism and a chemical can also threaten pollinators, interactions that are widely used to eliminate insect pests in integrative pest management.

The Bacillus cereus Group comprises organisms that are widely distributed in the environment and are of health and economic interest. We demonstrate an 'ecotypic' structure of populations in the B. cereus Group using (i) molecular data from Fluorescent Amplified Fragment Length Polymorphism patterns, ribosomal gene sequences, partial panC gene sequences, 'psychrotolerant' DNA sequence signatures and (ii) phenotypic and descriptive data from range of growth temperature, psychrotolerance and thermal niches. Seven major phylogenetic groups (I to VII) were thus identified, with ecological differences that provide evidence for a multiemergence of psychrotolerance in the B. cereus Group. A moderate thermotolerant group (VII) was basal to the mesophilic group I, from which in turn distinct thermal lineages have emerged, comprising two mesophilic groups (III, IV), an intermediate group (V) and two psychrotolerant groups (VI, II). This stepwise evolutionary transition toward psychrotolerance was particularly well illustrated by the relative abundance of the 'psychrotolerant' rrs signature (as defined by Pruss et al.) copies accumulated in strains that varied according to the phylogenetic group. The 'psychrotolerant' cspA signature (as defined by Francis et al.) was specific to group VI and provided a useful way to differentiate it from the psychrotolerant group II. This study illustrates how adaptation to novel environments by the modification of temperature tolerance limits has shaped historical patterns of global ecological diversification in the B. cereus Group. The implications for the taxonomy of this Group and for the human health risk are discussed.

The enterotoxigenic profiles of 51 B. cereus food-related strains were compared to those of 37 B. cereus food-poisoning strains. cytK and association of hbl-nhe-cytK enterotoxin genes were more frequent among diarrheal strains (73 and 63%) than among food-borne strains (37 and 33%). Unlike diarrheal strains, food-borne strains showed frequent nhe and hbl gene polymorphisms and were often low toxin producers.

The objective of this study was to understand the respective impact of ripening stage, temperature, and irradiance on seasonal variations of tomato fruit quality. During ripening, concentrations in reducing sugars, carotenes, ascorbate, rutin, and caffeic acid derivates increased, whereas those in titratable acidity, chlorophylls, and chlorogenic acid content decreased. Fruit temperature and irradiance affected final fruit composition. Sugars and acids (linked to fruit gustative quality) were not considerably modified, but secondary metabolites with antioxidant properties were very sensitive to fruit environment. Increased fruit irradiance enhanced ascorbate, lycopene, beta-carotene, rutin, and caffeic acid derivate concentrations and the disappearance of oxidized ascorbate and chlorophylls. Increasing the temperature from 21 to 26 degrees C reduced total carotene content without affecting lycopene content. A further temperature increase from 27 to 32 degrees C reduced ascorbate, lycopene, and its precursor's content, but enhanced rutin, caffeic acid derivates, and glucoside contents. The regulation by light and temperature of the biosynthesis pathways of secondary metabolites is discussed.

An in-depth polyphasic approach was applied to study the population structure of the human pathogen Bacillus cereus. To assess the intraspecific biodiversity of this species, which is the causative agent of gastrointestinal diseases, a total of 90 isolates from diverse geographical origin were studied by genetic [M13-PCR, random amplification of polymorphic DNA (RAPD), multilocus sequence typing (MLST)] and phenetic [Fourier transform Infrared (FTIR), protein profiling, biochemical assays] methods. The strain set included clinical strains, isolates from food remnants connected to outbreaks, as well as isolates from diverse food environments with a well documented strain history. The phenotypic and genotypic analysis of the compiled panel of strains illustrated a considerable diversity among B. cereus connected to diarrhoeal syndrome and other non-emetic food strains, but a very low diversity among emetic isolates. Using all typing methods, cluster analysis revealed a single, distinct cluster of emetic B. cereus strains. The isolates belonging to this cluster were neither able to degrade starch nor could they ferment salicin; they did not possess the genes encoding haemolysin BL (Hbl) and showed only weak or no haemolysis. In contrast, haemolytic-enterotoxin-producing B. cereus strains showed a high degree of heterogeneity and were scattered over different clusters when different typing methods were applied. These data provide evidence for a clonal population structure of cereulide-producing emetic B. cereus and indicate that emetic strains represent a highly clonal complex within a potentially panmictic or weakly clonal background population structure of the species. It may have originated only recently through acquisition of specific virulence factors such as the cereulide synthetase gene.

Multiplex PCR assay (m-PCR) with three sets of primers was developed for simultaneous identification of Campylobacter jejuni and C. coli. Poultry faecal samples were enriched in Preston broth for 24 h and streaking on selective media was performed before and after enrichment. m-PCR was applied on bacterial cultures harvested from media plates. The data showed a selective effect of Preston broth which favoured the growth of C. coli. Identification of the species by the hippurate hydrolysis test and by the m-PCR was performed on 294 isolates of Campylobacter. The efficiency of the identification by the biochemical test is only 34% in comparison to 100% efficiency with the PCR. The use of our m-PCR in combination with the culture method allowed reliable detection and identification of C. jejuni and C. coli within 3-4 d.

Anthocyanin extracts are increasingly used as food ingredients. A current challenge is to maintain their color properties. The stability of some colorants has been studied in sugar and non-sugar drink models at three pH values (3, 4, and 5) under thermal and light conditions simulating rapid food aging. At a given pH, color stability mainly depends on the structures of anthocyanins and of colorless phenolic compounds. Colorants rich in acylated anthocyanins (purple carrot, red radish, and red cabbage) display great stability due to intramolecular copigmentation. The protection of red chromophore is higher for diacylated anthocyanins in red radish and red cabbage. For colorants without acylated anthocyanins (grape-marc, elderberry, black currant, and chokeberry), intermolecular copigmentation plays a key role in color protection. Colorants rich in flavonols and with the highest copigment/pigment ratio show a remarkable stability. By contrast, catechins appear to have a negative effect on red colorants, quickly turning yellowish in drink models. This effect is more pronounced when the pH is increased. Finally, color does not seem to be greatly influenced by the addition of sugar.

An aerobic endospore-forming bacillus (NVH 391-98(T)) was isolated during a severe food poisoning outbreak in France in 1998, and four other similar strains have since been isolated, also mostly from food poisoning cases. Based on 16S rRNA gene sequence similarity, these strains were shown to belong to the Bacillus cereus Group (over 97% similarity with the current Group species) and phylogenetic distance from other validly described species of the genus Bacillus was less than 95%. Based on 16S rRNA gene sequence similarity and MLST data, these novel strains were shown to form a robust and well-separated cluster in the B. cereus Group, and constituted the most distant cluster from species of this Group. Major fatty acids (iso-C(15:0), C(16:0), iso-C(17:0), anteiso-C(15 : 0), iso-C(16:0), iso-C(13:0)) supported the affiliation of these strains to the genus Bacillus, and more specifically to the B. cereus Group. NVH 391-98(T) taxon was more specifically characterized by an abundance of iso-C(15:0) and low amounts of iso-C(13:0) compared with other members of the B. cereus Group. Genome similarity together with DNA-DNA hybridization values and physiological and biochemical tests made it possible to genotypically and phenotypically differentiate NVH 391-98(T) taxon from the six current B. cereus Group species. NVH 391-98(T) therefore represents a novel species, for which the name Bacillus cytotoxicus sp. nov. is proposed, with the type strain NVH 391-98(T) (= DSM 22905(T) = CIP 110041(T)).

In order to comply with criteria of green chemistry concepts and sustainability, a new procedure has been performed for solvent-free ultrasound-assisted extraction (UAE) to extract lipids from fresh Nannochloropsis oculata biomass. Through response surface methodology (RSM) parameters affecting the oil recovery were optimized. Optimum conditions for oil extraction were estimated as follows: (i) 1000 W ultrasonic power, (ii) 30 min extraction time and (iii) biomass dry weight content at 5%. Yields were calculated by the total fatty acids methyl esters amounts analyzed by GC-FID-MS. The maximum oil recovery was around 0.21%. This value was compared with the one obtained with the conventional extraction method (Bligh and Dyer). Furthermore, effect of temperature on the yield was also investigated. The overall results show an innovative and effective extraction method adapted for microalgae oil recovery, without using solvent and with an enable scaling up.

The present study aims first to compare the antioxidant microconstituent contents between organically and conventionally grown tomatoes and, second, to evaluate whether the consumption of purees made of these tomatoes can differently affect the plasma levels of antioxidant microconstituents in humans. When results were expressed as fresh matter, organic tomatoes had higher vitamin C, carotenoids, and polyphenol contents (except for chlorogenic acid) than conventional tomatoes. When results were expressed as dry matter, no significant difference was found for lycopene and naringenin. In tomato purees, no difference in carotenoid content was found between the two modes of culture, whereas the concentrations of vitamin C and polyphenols remained higher in purees made out of organic tomatoes. For the nutritional intervention, no significant difference (after 3 weeks of consumption of 96 g/day of tomato puree) was found between the two purees with regard to their ability to affect the plasma levels of the two major antioxidants, vitamin C and lycopene.

Over the centuries mankind has benefited from the natural materials that occur in plants. In earlier times the whole plant or an extract was used in cooking or as a medicine but nowadays the active constituents of plant extracts provide targets for the synthetic chemist. In this review we will explore the advantages that accrue from the incorporation of either ultrasound or microwaves in the extraction process. The two techniques offer different approaches in that ultrasound is generally used to improve conventional solvent extraction whereas microwaves are known for their ability to remove constituents via heating without solvents.

Very different toxins are responsible for the two types of gastrointestinal diseases caused by Bacillus cereus: the diarrhoeal syndrome is linked to nonhemolytic enterotoxin NHE, hemolytic enterotoxin HBL, and cytotoxin K, whereas emesis is caused by the action of the depsipeptide toxin cereulide. The recently identified cereulide synthetase genes permitted development of a molecular assay that targets all toxins known to be involved in food poisoning in a single reaction, using only four different sets of primers. The enterotoxin genes of 49 strains, belonging to different phylogenetic branches of the B. cereus group, were partially sequenced to encompass the molecular diversity of these genes. The sequence alignments illustrated the high molecular polymorphism of B. cereus enterotoxin genes, which is necessary to consider when establishing PCR systems. Primers directed towards the enterotoxin complex genes were located in different CDSs of the corresponding operons to target two toxin genes with one single set of primers. The specificity of the assay was assessed using a panel of B. cereus strains with known toxin profiles and was successfully applied to characterize strains from food and clinical diagnostic labs as well as for the toxin gene profiling of B. cereus isolated from silo tank populations.

Cell wall polysaccharides (CPSs) and polyphenols are major constituents of the dietary fiber complex in plant-based foods. Their digestion (by gut microbiota) and bioefficacy depend not only on their structure and quantity, but also on their intermolecular interactions. The composition and structure of these compounds vary with their dietary source (i.e., fruit or vegetable of origin) and can be further modified by food processing. Various components and structures of CPSs and polyphenols have been observed to demonstrate common and characteristic behaviors during interactions. However, at a fundamental level, the mechanisms that ultimately drive these interactions are still not fully understood. This review summarizes the current state of knowledge on the internal factors that influence CPS-polyphenol interactions, describes the different ways in which these interactions can be mediated by molecular composition or structure, and introduces the main methods for the analysis of these interactions, as well as the mechanisms involved. Furthermore, a comprehensive overview is provided of recent key findings in the area of CPS-polyphenol interactions. It is becoming clear that these interactions are shaped by a multitude of factors, the most important of which are the physicochemical properties of the partners: their morphology (surface area and porosity/pore shape), chemical composition (sugar ratio, solubility, and non-sugar components), and molecular architecture (molecular weight, degree of esterification, functional groups, and conformation). An improved understanding of the molecular mechanisms that drive interactions between CPSs and polyphenols may allow us to better establish a bridge between food processing and the bioavailability of colonic fermentation products from CPSs and antioxidant polyphenols, which could ultimately lead to the development of new guidelines for the design of healthier and more nutritious foods.