Sigma Clermont

autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.

We present a survey of recent work on robot manipulation and sensing of deformable objects, a field with relevant applications in diverse industries such as medicine (e.g. surgical assistance), food handling, manufacturing, and domestic chores (e.g. folding clothes). We classify the reviewed approaches into four categories based on the type of object they manipulate. Furthermore, within this object classification, we divide the approaches based on the particular task they perform on the deformable object. Finally, we conclude this survey with a discussion of the current state-of-the-art approaches and propose future directions within the proposed classification.

Use of electronic cigarettes has grown exponentially over the past few years, raising concerns about harmful emissions. This study quantified potentially toxic compounds in the vapor and identified key parameters affecting emissions. Six principal constituents in three different refill "e-liquids" were propylene glycol (PG), glycerin, nicotine, ethanol, acetol, and propylene oxide. The latter, with mass concentrations of 0.4-0.6%, is a possible carcinogen and respiratory irritant. Aerosols generated with vaporizers contained up to 31 compounds, including nicotine, nicotyrine, formaldehyde, acetaldehyde, glycidol, acrolein, acetol, and diacetyl. Glycidol is a probable carcinogen not previously identified in the vapor, and acrolein is a powerful irritant. Emission rates ranged from tens to thousands of nanograms of toxicants per milligram of e-liquid vaporized, and they were significantly higher for a single-coil vs a double-coil vaporizer (by up to an order of magnitude for aldehydes). By increasing the voltage applied to a single-coil device from 3.3 to 4.8 V, the mass of e-liquid consumed doubled from 3.7 to 7.5 mg puff(-1) and the total aldehyde emission rates tripled from 53 to 165 μg puff(-1), with acrolein rates growing by a factor of 10. Aldehyde emissions increased by more than 60% after the device was reused several times, likely due to the buildup of polymerization byproducts that degraded upon heating. These findings suggest that thermal degradation byproducts are formed during vapor generation. Glycidol and acrolein were primarily produced by glycerin degradation. Acetol and 2-propen-1-ol were produced mostly from PG, while other compounds (e.g., formaldehyde) originated from both. Because emissions originate from reaction of the most common e-liquid constituents (solvents), harmful emissions are expected to be ubiquitous when e-cigarette vapor is present.

The antiozonant N-phenyl-N'-(1,3-dimethylbutyl)-p-phenylenediamine (6-PPD) is added to tires to increase their lifetime and is emitted with tire and road wear particles into the environment. Recently, one of its transformation products (TPs), 6-PPD quinone (6-PPDQ), has gained attention due to its toxicity towards coho salmon. In this study, the abiotic oxidative transformation of 6-PPD is investigated by a series of ozonation experiments in the lab followed by analysis of TPs using liquid chromatography-high resolution-mass spectrometry (LC-HRMS). A total of 38 TPs were detected and tentatively identified, which were formed either directly from 6-PPD or via 6-PPDQ as intermediate. A suspect screening by LC-HRMS showed 32 of these TPs to occur in snow collected from urban roads as surrogate of road-runoff, where 6-PPDQ, 4-aminodiphenylamine (4-ADPA), TP 213, and TP 249 were the most prominent besides 6-PPD. More than 90% of the total load of 6-PPD and its TPs was found in the particulate fraction of snow. Thus, retaining the particulate fraction of road runoff before its discharge into surface water would substantially reduce the emission of 6-PPD and many of its TPs. Some TPs prevailed in the water phase of the snow due to their higher polarity. A total of 13 TPs were detected by suspect screening in the dissolved phase of a wastewater treatment plant (WWTP) influent. Their total load was markedly enhanced during a day of snowmelt (approx. 1100 g/d) and rainfall (approx. 2000 g/d) compared to dry weather (approx. 190 g/d). 6-PPD and 6-PPDQ contributed to less than 1% to this total load in the water phase (estimated concentrations of max 0.1 µg/L). The elimination of the estimated total loads of 6-PPD related TPs from the water phase in WWTP ranged from 22 to 67% depending on weather conditions. Eventually TP 249, 4-ADPA and TP 259_2 dominated in WWTP effluent (estimated concentration from 0.5 up to 2 µg/L). Thus TP 249 and TP 259_2 are, likely, the most specific and stable TPs of 6-PPD to be determined in the environment.

Metasurfaces are ultrathin optical elements that are highly promising for constructing lightweight and compact optical systems. For their practical implementation, it is imperative to maximize the metasurface efficiency. Topology optimization provides a pathway for pushing the limits of metasurface efficiency; however, topology optimization methods have been limited to the design of microscale devices due to the extensive computational resources that are required. We introduce a new strategy for optimizing large-area metasurfaces in a computationally efficient manner. By stitching together individually optimized sections of the metasurface, we can reduce the computational complexity of the optimization from high-polynomial to linear. As a proof of concept, we design and experimentally demonstrate large-area, high-numerical-aperture silicon metasurface lenses with focusing efficiencies exceeding 90%. These concepts can be generalized to the design of multifunctional, broadband diffractive optical devices and will enable the implementation of large-area, high-performance metasurfaces in practical optical systems.

Plastics are ubiquitous in the oceans and constitute suitable matrices for bacterial attachment and growth. Understanding biofouling mechanisms is a key issue to assessing the ecological impacts and fate of plastics in marine environment. In this study, we investigated the different steps of plastic colonization of polyolefin-based plastics, on the first one hand, including conventional low-density polyethylene (PE), additivated PE with pro-oxidant (OXO), and artificially aged OXO (AA-OXO); and of a polyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), on the other hand. We combined measurements of physical surface properties of polymers (hydrophobicity and roughness) with microbiological characterization of the biofilm (cell counts, taxonomic composition, and heterotrophic activity) using a wide range of techniques, with some of them used for the first time on plastics. Our experimental setup using aquariums with natural circulating seawater during 6 weeks allowed us to characterize the successive phases of primo-colonization, growing, and maturation of the biofilms. We highlighted different trends between polymer types with distinct surface properties and composition, the biodegradable AA-OXO and PHBV presenting higher colonization by active and specific bacteria compared to non-biodegradable polymers (PE and OXO). Succession of bacterial population occurred during the three colonization phases, with hydrocarbonoclastic bacteria being highly abundant on all plastic types. This study brings original data that provide new insights on the colonization of non-biodegradable and biodegradable polymers by marine microorganisms.

Inflammation is the initial response of the immune system to potentially harmful stimuli (e.g., injury, stress, and infections). The process involves activation of macrophages and neutrophils, which produce mediators, such as nitric oxide (NO), prostaglandin E2 (PGE2), pro-inflammatory and anti-inflammatory cytokines. The pro-inflammatory cytokines interleukin-1β (IL-1β), interleukin 6 (IL-6), and tumor necrosis factor-α (TNF-α) are considered as biomarkers of inflammation. Even though it occurs as a physiological defense mechanism, its involvement in the pathogenesis of various diseases is reported. Rheumatoid arthritis, inflammatory bowel disease, Alzheimer’s disease, and cardiovascular diseases are only a part of the diseases, in which pathogenesis the chronic inflammation is involved. Fucoidans are complex polysaccharides from brown seaweeds and some marine invertebrates, composed mainly of l-fucose and sulfate ester groups and minor amounts of neutral monosaccharides and uronic acids. Algae-derived fucoidans are studied intensively during the last years regarding their multiple biological activities and possible therapeutic potential. However, the source, species, molecular weight, composition, and structure of the polysaccharides, as well as the route of administration of fucoidans, could be crucial for their effects. Fucoidan is reported to act on different stages of the inflammatory process: (i) blocking of lymphocyte adhesion and invasion, (ii) inhibition of multiple enzymes, and (iii) induction of apoptosis. In this review, we focused on the immunemodulating and anti-inflammatory effects of fucoidans derived from macroalgae and the models used for their evaluation. Additional insights on the molecular structure of the compound are included.

The use of polysaccharide-based materials presents an eco-friendly technological solution, by reducing dependence on fossil resources while reducing a product's carbon footprint, when compared to conventional plastic packaging materials. This review discusses the potential of polysaccharides as a raw material to produce multifunctional materials for food packaging applications. The covered areas include the recent innovations and properties of the polysaccharide-based materials. Emphasis is given to hemicelluloses, marine polysaccharides, and bacterial exopolysaccharides and their potential application in the latest trends of food packaging materials, including edible coatings, intelligent films, and thermo-insulated aerogel packaging.

BACKGROUND: Lixisenatide, a glucagon-like peptide-1 receptor agonist used for the treatment of diabetes, has shown neuroprotective properties in a mouse model of Parkinson's disease. METHODS: In this phase 2, double-blind, randomized, placebo-controlled trial, we assessed the effect of lixisenatide on the progression of motor disability in persons with Parkinson's disease. Participants in whom Parkinson's disease was diagnosed less than 3 years earlier, who were receiving a stable dose of medications to treat symptoms, and who did not have motor complications were randomly assigned in a 1:1 ratio to daily subcutaneous lixisenatide or placebo for 12 months, followed by a 2-month washout period. The primary end point was the change from baseline in scores on the Movement Disorder Society-Unified Parkinson's Disease Rating Scale (MDS-UPDRS) part III (range, 0 to 132, with higher scores indicating greater motor disability), which was assessed in patients in the on-medication state at 12 months. Secondary end points included other MDS-UPDRS subscores at 6, 12, and 14 months and doses of levodopa equivalent. RESULTS: A total of 156 persons were enrolled, with 78 assigned to each group. MDS-UPDRS part III scores at baseline were approximately 15 in both groups. At 12 months, scores on the MDS-UPDRS part III had changed by -0.04 points (indicating improvement) in the lixisenatide group and 3.04 points (indicating worsening disability) in the placebo group (difference, 3.08; 95% confidence interval, 0.86 to 5.30; P = 0.007). At 14 months, after a 2-month washout period, the mean MDS-UPDRS motor scores in the off-medication state were 17.7 (95% CI, 15.7 to 19.7) with lixisenatide and 20.6 (95% CI, 18.5 to 22.8) with placebo. Other results relative to the secondary end points did not differ substantially between the groups. Nausea occurred in 46% of participants receiving lixisenatide, and vomiting occurred in 13%. CONCLUSIONS: In participants with early Parkinson's disease, lixisenatide therapy resulted in less progression of motor disability than placebo at 12 months in a phase 2 trial but was associated with gastrointestinal side effects. Longer and larger trials are needed to determine the effects and safety of lixisenatide in persons with Parkinson's disease. (Funded by the French Ministry of Health and others; LIXIPARK ClinicalTrials.gov number, NCT03439943.).

Thanks to their high biocompatibility and bioactivity, bioactive glasses are very promising materials for soft and hard tissue repair and engineering. Because bioactivity and specific surface area intrinsically linked, the last decade has seen a focus on the development of highly porous and/or nano-sized materials. This review emphasizes the synthesis of bioactive glass nanoparticles and materials design strategies. The first part comprehensively covers mainly soft chemistry processes, which aim to obtain dispersible and monodispersed nanoparticles. The second part discusses the use of bioactive glass nanoparticles for medical applications, highlighting the design of materials. Mesoporous nanoparticles for drug delivery, injectable systems and scaffolds consisting of bioactive glass nanoparticles dispersed in a polymer, implant coatings and particle dispersions will be presented.

Abstract Obesity is one of the most important risk factors of knee osteoarthritis (KOA), but its impact on clinical and functional consequences is less clear. The main objective of this cross-sectional study was to describe the relation between body mass index (BMI) and clinical expression of KOA. Participants with BMI ≥ 25 kg/m 2 and KOA completed anonymous self-administered questionnaires. They were classified according to BMI in three groups: overweight (BMI 25–30 kg/m 2 ), stage I obesity (BMI 30–35 kg/m 2 ) and stage II/III obesity (BMI ≥ 35 kg/m 2 ). The groups were compared in terms of pain, physical disability, level of physical activity (PA) and fears and beliefs concerning KOA. Among the 391 individuals included, 57.0% were overweight, 28.4% had stage I obesity and 14.6% had stage II/III obesity. Mean pain score on a 10-point visual analog scale was 4.3 (SD 2.4), 5.0 (SD 2.6) and 5.2 (SD 2.3) with overweight, stage I and stage II/III obesity, respectively (p = 0.0367). The mean WOMAC function score (out of 100) was 36.2 (SD 20.1), 39.5 (SD 21.4) and 45.6 (SD 18.4), respectively (p = 0.0409). The Knee Osteoarthritis Fears and Beliefs Questionnaire total score (KOFBEQ), daily activity score and physician score significantly differed among BMI groups (p = 0.0204, p = 0.0389 and p = 0.0413, respectively), and the PA level significantly differed (p = 0.0219). We found a dose–response relation between BMI and the clinical consequences of KOA. Strategies to treat KOA should differ by obesity severity. High PA level was associated with low BMI and contributes to preventing the clinical consequences of KOA.

Bioactive compounds with diverse chemical structures play a significant role in disease prevention and maintenance of physiological functions. Due to the increase in industrial demand for new biosourced molecules, several types of biomasses are being exploited for the identification of bioactive metabolites and techno-functional biomolecules that are suitable for the subsequent uses in cosmetic, food and pharmaceutical fields. Among the various biomasses available, macroalgae are gaining popularity because of their potential nutraceutical and health benefits. Such health effects are delivered by specific diterpenes, pigments (fucoxanthin, phycocyanin, and carotenoids), bioactive peptides and polysaccharides. Abundant and recent studies have identified valuable biological activities of native algae polysaccharides, but also of their derivatives, including oligosaccharides and (bio)chemically modified polysaccharides. However, only a few of them can be industrially developed and open up new markets of active molecules, extracts or ingredients. In this respect, the health and nutraceutical claims associated with marine algal bioactive polysaccharides are summarized and comprehensively discussed in this review.

Outdoor field measurements of bioaerosols are performed within a wide range of basic and applied scientific disciplines, each with its own goals, assumptions, and terminology. This article contains brief reviews of outdoor field bioaerosol research from these diverse interests, with emphasis on perspectives from the atmospheric sciences. The focus is on a high-level discussion of pressing scientific questions, grand challenges, and needs for cross-disciplinary collaboration. The research topics, in which bioaerosol field measurement is important, include (i) atmospheric physics, clouds, climate, and hydrological cycle; (ii) atmospheric chemistry; (iii) airborne allergen-containing particles; (iv) airborne human pathogens and national security; (v) airborne livestock and crop pathogens; and (vi) biogeography and biodiversity. We concisely review bioaerosol impacts and discuss properties that distinguish bioaerosols from abiological aerosols. We give extra focus to regions of specific interest, i.e., forests, polar regions, marine and coastal environments, deserts, urban and rural areas, and summarize key considerations related to bioaerosol measurements, such as of fluxes, of long-range transport, and of sampling from both stationary and vessel-driven platforms. Keeping in mind a series of key scientific questions posed within the diverse communities, we suggest that pressing scientific questions include the following: (i)emission sources and flux estimates; (ii) spatial distribution; (iii) changes in distribution; (iv)atmospheric aging; (v) metabolic activity; (vi) urbanization of allergies; (vii) transport of human pathogens; and (viii) climate-relevant properties.

Abstract Benefiting from the advantageous features of high safety, abundant reserves, low cost, and high energy density, aqueous Zn‐based rechargeable batteries (AZBs) have received extensive attention as promising candidates for energy storage. To achieve high‐performance AZBs with high reversibility and energy density, great efforts have been devoted to overcoming their drawbacks by focusing on the modification of electrode materials and electrolytes. Based on different cathode materials and aqueous electrolytes, the development of aqueous AZBs with different redox mechanisms are discussed in this review, including insertion/extraction chemistries (e.g., Zn 2+ , alkali metal ion, H + , NH 4 + , and so forth) dissolution/deposition reactions (e.g., MnO 2 /Mn 2+ ), redox couples in flow batteries (e.g., I 3 − /3I − , Br 2 /Br − , and so forth), oxygen electrochemistry (e.g., O 2 /OH − , O 2 /O 2 2− ), and carbon dioxide electrochemistry (e.g., CO 2 /CO, CO 2 /HCOOH). In particular, the basic reaction mechanisms, issues with the Zn electrode, aqueous electrolytes, and cathode materials as well as their design strategies are systematically reviewed. Finally, the remaining challenges faced by AZBs are summarized, and perspectives for further investigations are proposed.

Developing reliable anti-biofilm strategies or efficient biofilm-based bioprocesses strongly depends on having a clear understanding of the mechanisms underlying biofilm development, and knowledge of the relevant mechanical parameters describing microbial biofilm behavior. Many varied mechanical testing methods are available to assess these parameters. The mechanical properties thus identified can then be used to compare protocols such as antibiotic screening. However, the lack of standardization in both mechanical testing and the associated identification methods for a given microbiological goal remains a blind spot in the biofilm community. The pursuit of standardization is problematic, as biofilms are living structures, i.e., both complex and dynamic. Here, we review the main available methods for characterizing the mechanical properties of biofilms through the lens of the relationship linking experimental testing to the identification of mechanical parameters. We propose guidelines for characterizing biofilms according to microbiological objectives that will help the reader choose an appropriate test and a relevant identification method for measuring any given mechanical parameter. The use of a common methodology for the mechanical characterization of biofilms will enable reliable analysis and comparison of microbiological protocols needed for improvement of engineering process and screening.

Today, chitosan (CS) is probably considered as a biofunctional polysaccharide with the most notable growth and potential for applications in various fields. The progress in chitin chemistry and the need to replace additives and non-natural polymers with functional natural-based polymers have opened many new opportunities for CS and its derivatives. Thanks to the specific reactive groups of CS and easy chemical modifications, a wide range of physico-chemical and biological properties can be obtained from this ubiquitous polysaccharide that is composed of β-(1,4)-2-acetamido-2-deoxy-d-glucose repeating units. This review is presented to share insights into multiple native/modified CSs and chitooligosaccharides (COS) associated with their functional properties. An overview will be given on bioadhesive applications, antimicrobial activities, adsorption, and chelation in the wine industry, as well as developments in medical fields or biodegradability.

Currently, pectins are widely used in the cosmetic, pharmaceutical, and food industries, mainly as texturizing, emulsifying, stabilizing, and gelling agents. Pectins are polysaccharides composed of a large linear segment of α-(1,4) linked d-galactopyranosyluronic acids interrupted by β-(1,2)-linked l-rhamnoses and ramified by short chains composed of neutral hexoses and pentoses. The characteristics and applications of pectins are strongly influenced by their structures depending on plant species and tissues but also extraction methods. The aim of this review is therefore to highlight the structures of pectins and the various methods used to extract them, including conventional ones but also microwave heating, ultrasonic treatment, and dielectric barrier discharge techniques, assessing physico-chemical parameters which have significant effects on pectin characteristics and applications as techno-functional and bioactive agents.

An ordered network of interconnected tin oxide (SnO 2 ) nanoparticles with a unique 3D architecture and an excellent lithium‐ion (Li‐ion) storage performance is derived for the first time through hydrolysis and thermal self‐assembly of the solid alkoxide precursor. Mesoporous anodes composed of these ≈9 nm‐sized SnO 2 particles exhibit substantially higher specific capacities, rate performance, coulombic efficiency, and cycling stabilities compared with disordered nanoparticles and commercial SnO 2 . A discharge capacity of 778 mAh g –1 , which is very close to the theoretical limit of 781 mAh g –1 , is achieved at a current density of 0.1 C. Even at high rates of 2 C (1.5 A g –1 ) and 6 C (4.7 A g –1 ), these ordered SnO 2 nanoparticles retain stable specific capacities of 430 and 300 mAh g –1 , respectively, after 100 cycles. Interconnection between individual nanoparticles and structural integrity of the SnO 2 electrodes are preserved through numerous charge–discharge process cycles. The significantly better electrochemical performance of ordered SnO 2 nanoparticles with a tap density of 1.60 g cm –3 is attributed to the superior electrode/electrolyte contact, Li‐ion diffusion, absence of particle agglomeration, and improved strain relaxation (due to tiny space available for the local expansion). This comprehensive study demonstrates the necessity of mesoporosity and interconnection between individual nanoparticles for improving the Li‐ion storage electrochemical performance of SnO 2 anodes.

The atmosphere connects habitats across multiple spatial scales via airborne dispersal of microbial cells, propagules and biomolecules. Atmospheric microorganisms have been implicated in a variety of biochemical and biophysical transformations. Here, we review ecological aspects of airborne microorganisms with respect to their dispersal, activity and contribution to climatic processes. Latest studies utilizing metagenomic approaches demonstrate that airborne microbial communities exhibit pronounced biogeography, driven by a combination of biotic and abiotic factors. We quantify distributions and fluxes of microbial cells between surface habitats and the atmosphere and place special emphasis on long-range pathogen dispersal. Recent advances have established that these processes may be relevant for macroecological outcomes in terrestrial and marine habitats. We evaluate the potential biological transformation of atmospheric volatile organic compounds and other substrates by airborne microorganisms and discuss clouds as hotspots of microbial metabolic activity in the atmosphere. Furthermore, we emphasize the role of microorganisms as ice nucleating particles and their relevance for the water cycle via formation of clouds and precipitation. Finally, potential impacts of anthropogenic forcing on the natural atmospheric microbiota via emission of particulate matter, greenhouse gases and microorganisms are discussed.

Nowadays, microalgae and cyanobacteria have become a promising and sustainable source of useful products, thanks to their richness in bioactive metabolites of high value (antibiotics, toxins, pharmaceutically active compounds, plant growth regulators, and others). These photoautotroph microorganisms generate biomass using photosynthesis. This review, which distinguishes microalgae and Cyanobacteria, often called blue-green microalgae, aims to present their classification and taxonomic diversity as the ecological niches occupied by them. In addition, the usages of open ponds and photobioreactors to produce various microalgae and Cyanobacteria strains and the high-value bioactive compounds from these microorganisms are summarized. Finally, the numerous commercial applications of these phytoplanktons in different fields, such as food, dietary supplements, feed, cosmetic, and biofuel applications, are reviewed.