State Key Laboratory of Fine Chemicals

MXenes, a new family of 2D materials, combine hydrophilic surfaces with metallic conductivity. Delamination of MXene produces single-layer nanosheets with thickness of about a nanometer and lateral size of the order of micrometers. The high aspect ratio of delaminated MXene renders it promising nanofiller in multifunctional polymer nanocomposites. Herein, Ti3C2T(x) MXene was mixed with either a charged polydiallyldimethylammonium chloride (PDDA) or an electrically neutral polyvinyl alcohol (PVA) to produce Ti3C2T(x)/polymer composites. The as-fabricated composites are flexible and have electrical conductivities as high as 2.2 × 10(4) S/m in the case of the Ti3C2T(x)/PVA composite film and 2.4 × 10(5) S/m for pure Ti3C2T(x) films. The tensile strength of the Ti3C2T(x)/PVA composites was significantly enhanced compared with pure Ti3C2T(x) or PVA films. The intercalation and confinement of the polymer between the MXene flakes not only increased flexibility but also enhanced cationic intercalation, offering an impressive volumetric capacitance of ∼530 F/cm(3) for MXene/PVA-KOH composite film at 2 mV/s. To our knowledge, this study is a first, but crucial, step in exploring the potential of using MXenes in polymer-based multifunctional nanocomposites for a host of applications, such as structural components, energy storage devices, wearable electronics, electrochemical actuators, and radiofrequency shielding, to name a few.

Photodynamic therapy (PDT), a therapeutic mode involving light triggering, has been recognized as an attractive oncotherapy treatment. However, nonnegligible challenges remain for its further clinical use, including finite tumor suppression, poor tumor targeting, and limited therapeutic depth. The photosensitizer (PS), being the most important element of PDT, plays a decisive role in PDT treatment. This review summarizes recent progress made in the development of PSs for overcoming the above challenges. This progress has included PSs developed to display enhanced tolerance of the tumor microenvironment, improved tumor-specific selectivity, and feasibility of use in deep tissue. Based on their molecular photophysical properties and design directions, the PSs are classified by parent structures, which are discussed in detail from the molecular design to application. Finally, a brief summary of current strategies for designing PSs and future perspectives are also presented. We expect the information provided in this review to spur the further design of PSs and the clinical development of PDT-mediated cancer treatments.

Environment-related parameters, including viscosity, polarity, temperature, hypoxia, and pH, play pivotal roles in controlling the physical or chemical behaviors of local molecules. In particular, in a biological environment, such factors predominantly determine the biological properties of the local environment or reflect corresponding status alterations. Abnormal changes in these factors would cause cellular malfunction or become a hallmark of the occurrence of severe diseases. Therefore, in recent years, they have increasingly attracted research interest from the fields of chemistry and biological chemistry. With the emergence of fluorescence sensing and imaging technology, several fluorescent chemosensors have been designed to respond to such parameters and to further map their distributions and variations in vitro/in vivo. In this work, we have reviewed a number of various environment-responsive chemosensors related to fluorescent recognition of viscosity, polarity, temperature, hypoxia, and pH that have been reported thus far.

Boron dipyrromethene (Bodipy) is one of the most extensively investigated organic chromophores. Most of the investigations are focused on the singlet excited state of Bodipy, such as fluorescence. In stark contrast, the study of the triplet excited state of Bodipy is limited, but it is an emerging area, since the triplet state of Bodipy is tremendously important for several areas, such as the fundamental photochemistry study, photodynamic therapy (PDT), photocatalysis and triplet-triplet annihilation (TTA) upconversion. The recent developments in the study of the production, modulation and application of the triplet excited state of Bodipy are discussed in this review article. The formation of the triplet state of Bodipy upon photoexcitation, via the well known approach such as the heavy atom effect (including I, Br, Ru, Ir, etc.), and the new methods, such as using a spin converter (e.g. C60), charge recombination, exciton coupling and the doubly substituted excited state, are summarized. All the Bodipy-based triplet photosensitizers show strong absorption of visible or near IR light and the long-lived triplet excited state, which are important for the application of the triplet excited state in PDT or photocatalysis. Moreover, the methods for switching (or modulation) of the triplet excited state of Bodipy were discussed, such as those based on the photo-induced electron transfer (PET), by controlling the competing Förster-resonance-energy-transfer (FRET), or the intermolecular charge transfer (ICT). Controlling the triplet excited state will give functional molecules such as activatable PDT reagents or molecular devices. It is worth noting that switching of the singlet excited state and the triplet state of Bodipy may follow different principles. Application of the triplet excited state of Bodipy in PDT, hydrogen (H2) production, photoredox catalytic organic reactions and TTA upconversion were discussed. The challenges and the opportunities in these areas were briefly discussed.

The emergence of carbon dots (CDs) has opened up an exciting new field in the science and technology of carbon nanomaterials and has attracted increasing interest in recent years. Due to their diverse physicochemical properties and favourable attributes, such as quantum confinement effects and abundant surface defects, CDs and their derived hybrids have shown exciting and indispensable prospects in the energy conversion and storage fields. Considering the latest developments, in this review, we comprehensively summarize the classification and structure of CDs. Three strategies for structural engineering of CDs are presented and analyzed, in terms of the tuning of size and crystallinity, and the methodologies for surface modification and heteroatom doping, with a focus on the relationship among the synthesis methods, structure and properties of the concerned CDs. More importantly, the recent advances in energy-oriented applications of CDs, including photo- and electro-catalysis, light-emitting diodes, photovoltaic cells, lithium/sodium ion batteries and supercapacitors, will be systematically highlighted. Finally, we discuss and outline the remaining major challenges and opportunities for CDs in the future.

The integrated hybrid architectures composed of edge site-enriched nickel–cobalt sulfide (Ni–Co–S) nanoparticles and graphene as advanced materials for asymmetric supercapacitors are configured, delivering a superb rate capability.

reduction, energy storage, water splitting, and electronic devices, as well as for the fabrication of membranes. Although existing applications are promising and encouraging, MOF thin films still face numerous challenges, including the need for a more thorough understanding of the thin-film growth mechanism, stability of the internal and external interfaces, strategies for doping and models for charge carrier transport. In this paper, we review the recent advances in MOF thin films, including fabrication and patterning strategies and existing nanotechnology applications. We conclude by listing the most attractive future opportunities as well as the most urgent challenges.

conversion into useful fuels/chemicals are also summarized. To meet these challenges, future research directions are proposed in this review.

Electrochemical water splitting is an appealing and promising approach for energy conversion and storage. As a key half-reaction of electricity-driven water splitting, the oxygen evolution reaction (OER) is a sluggish process due to the transfer of four protons and four electrons. Therefore, development of low-cost and robust OER electrocatalysts is of great importance for improving the efficiency of water splitting. Based on the merits of high surface area, rich pore structure, diverse composition and well-defined metal centers, metal-organic frameworks (MOFs) and their derivatives have been widely exploited as OER electrocatalysts. Herein, the current progress on MOFs and their derivatives for OER electrolysis is summarized, highlighting the design principle, synthetic methods and performance for MOF-based materials. In addition, the structure-performance relationships of MOFs and their derivatives toward the OER are discussed, providing valuable insights into rationally developing OER catalysts with high efficiency. The current scientific and technological challenges and future perspectives towards the purpose of sustainable industrial applications are addressed at the end.

Due to the growing demand for energy and impending environmental issues, fuel cells have attracted significant attention as an alternative to conventional energy technologies.

Chemiluminescence, the generation of light through chemiexcitation as a result of chemical reactions, has emerged as a novel tool for bioimaging and therapy in vivo. Due to the elimination of external optical excitation, it can effectively avoid background autofluorescence existing in fluorescence techniques, providing extremely high signal-to-noise ratios and sensitivity in bioimaging. Furthermore, in situ emitted photons can replace traditional excitation light to construct chemiexcited photodynamic therapy or drug release systems for the monitoring and treatment of deeply seated diseases or tumors. In this tutorial review, we will focus on the recent advancements of chemiluminescent platforms based on luminophore substrates including luminol and its derivatives, cypridina luciferin analogs, peroxyoxalates, and dioxetanes, and systematically summarize the design principles, sensing mechanisms, and bioimaging and therapeutic applications of representative chemiluminescent probes as well as theranostic agents. Finally, the potential challenges and perspectives of chemiluminescent platforms for bioimaging and therapeutics are also discussed.

This review underlines the strategies to suppress HER for selective NRR in view of proton-/electron-transfer kinetics, thermodynamics, and electrocatalyst design on the basis of deep understanding for NRR mechanisms.

Rationally designed Co nanoparticle-embedded carbon@Co₉S₈ double-shelled nanocages exhibit excellent electrocatalytic performance for the oxygen reduction reaction.

Conventional cancer chemotherapy is often associated with toxicity issues. Thus, new drug delivery systems (DDSs) are developed as alternatives owing to their potential to selectively target affected cells while sparing normal tissues. Among them, noninvasive and biocompatible mesoporous silica nanoparticle (MSN)-based targeted DDSs have developed rapidly. In particular, controlled gatekeepers capping the pore entrances of MSNs play prominent and crucial roles in achieving specific drug release and avoiding premature leakage in the delivery process before the target is reached, and perfect gatekeepers can only be removed under specific internal or external stimuli, such as pH, redox potential, temperature, biomolecules, light, magnetic field and ultrasound, or a combination of these stimuli, which is significant for precise therapeutic treatments and potential applications in human bodies. Thus, the main focus of this review is to highlight the most recent progress on the design of various controlled MSN gatekeepers to achieve 'zero premature release' drug delivery. The diverse gatekeepers are categorised into the following kinds according to their types and characteristics: (1) polymers; (2) inorganic nanomaterials; (3) host-guest assemblies; and (4) biomacromolecules. This review will offer a broad palette of opportunities for researchers with interests including nanomaterial fabrication and modification, targeted drug delivery and stimuli-responsive drug release.

Transition metals (d-blocks) are recognized as playing critical roles in biology, and they most often act as cofactors in diverse enzymes; however, improper regulation of transition metal stores is also connected to serious disorders. Therefore, the monitoring and imaging of transition metals are significant for biological research as well as clinical diagnosis. In this article, efforts have been made to review the chemical sensors that have been developed for the detection of the first-row d-block metals (except Cu and Zn): Cr, Mn, Fe, Co, and Ni. We focus on the development of fluorescent sensors (fall into three classes: "turn-off", "turn-on", and ratiometric), colorimetric sensors, and responsive MRI contrast agents for these transition metals (242 references). Future work will be likely to fill in the blanks: (1) sensors for Sc, Ti, and V; (2) MRI sensors for Cr, Mn, Co, Ni; (3) ratiometric fluorescent sensors for Cr(6+), Mn(2+), and Ni(2+), explore new ways of sensing Fe(3+) or Cr(3+) without the proton interference, as well as extend applications of MRI sensors to living systems.

Dye-sensitized photoelectrochemical cells based on molecular components represent promising approaches to generate hydrogen<italic>via</italic>solar-driven water splitting.

This review underlines innovative design strategies for CO₂RR system, also distinctively presents the current status and new trend.

A novel two-step electrodeposition method is presented to fabricate a high-performance CoS/graphene hybrid network with a nanosheet structure on Ni foam.

A novel composite PCM was facilely synthesized, which exhibited enhanced absorption peaks at visible and near-infrared region, and the photothermal conversion and storage efficiency was outstanding under simulated and actual sunlight irradiation.

The direct synthesis of H₂O₂from H₂and O₂using Pd catalyst, fuel cell and plasma methods have been reviewed systematically.