Stranmillis University College

The increasing global industrialization and over-exploitation of fossil fuels has induced the release of greenhouse gases, leading to an increase in global temperature and causing environmental issues. There is therefore an urgent necessity to reach net-zero carbon emissions. Only 4.5% of countries have achieved carbon neutrality, and most countries are still planning to do so by 2050-2070. Moreover, synergies between different countries have hampered synergies between adaptation and mitigation policies, as well as their co-benefits. Here, we present a strategy to reach a carbon neutral economy by examining the outcome goals of the 26th summit of the United Nations Climate Change Conference of the Parties (COP 26). Methods have been designed for mapping carbon emissions, such as input-output models, spatial systems, geographic information system maps, light detection and ranging techniques, and logarithmic mean divisia. We present decarbonization technologies and initiatives, and negative emissions technologies, and we discuss carbon trading and carbon tax. We propose plans for carbon neutrality such as shifting away from fossil fuels toward renewable energy, and the development of low-carbon technologies, low-carbon agriculture, changing dietary habits and increasing the value of food and agricultural waste. Developing resilient buildings and cities, introducing decentralized energy systems, and the electrification of the transportation sector is also necessary. We also review the life cycle analysis of carbon neutral systems.

Microplastic pollution is becoming a major issue for human health due to the recent discovery of microplastics in most ecosystems. Here, we review the sources, formation, occurrence, toxicity and remediation methods of microplastics. We distinguish ocean-based and land-based sources of microplastics. Microplastics have been found in biological samples such as faeces, sputum, saliva, blood and placenta. Cancer, intestinal, pulmonary, cardiovascular, infectious and inflammatory diseases are induced or mediated by microplastics. Microplastic exposure during pregnancy and maternal period is also discussed. Remediation methods include coagulation, membrane bioreactors, sand filtration, adsorption, photocatalytic degradation, electrocoagulation and magnetic separation. Control strategies comprise reducing plastic usage, behavioural change, and using biodegradable plastics. Global plastic production has risen dramatically over the past 70 years to reach 359 million tonnes. China is the world's top producer, contributing 17.5% to global production, while Turkey generates the most plastic waste in the Mediterranean region, at 144 tonnes per day. Microplastics comprise 75% of marine waste, with land-based sources responsible for 80-90% of pollution, while ocean-based sources account for only 10-20%. Microplastics induce toxic effects on humans and animals, such as cytotoxicity, immune response, oxidative stress, barrier attributes, and genotoxicity, even at minimal dosages of 10 μg/mL. Ingestion of microplastics by marine animals results in alterations in gastrointestinal tract physiology, immune system depression, oxidative stress, cytotoxicity, differential gene expression, and growth inhibition. Furthermore, bioaccumulation of microplastics in the tissues of aquatic organisms can have adverse effects on the aquatic ecosystem, with potential transmission of microplastics to humans and birds. Changing individual behaviours and governmental actions, such as implementing bans, taxes, or pricing on plastic carrier bags, has significantly reduced plastic consumption to 8-85% in various countries worldwide. The microplastic minimisation approach follows an upside-down pyramid, starting with prevention, followed by reducing, reusing, recycling, recovering, and ending with disposal as the least preferable option.

New technologies, systems, societal organization and policies for energy saving are urgently needed in the context of accelerated climate change, the Ukraine conflict and the past coronavirus disease 2019 pandemic. For instance, concerns about market and policy responses that could lead to new lock-ins, such as investing in liquefied natural gas infrastructure and using all available fossil fuels to compensate for Russian gas supply cuts, may hinder decarbonization efforts. Here we review energy-saving solutions with a focus on the actual energy crisis, green alternatives to fossil fuel heating, energy saving in buildings and transportation, artificial intelligence for sustainable energy, and implications for the environment and society. Green alternatives include biomass boilers and stoves, hybrid heat pumps, geothermal heating, solar thermal systems, solar photovoltaics systems into electric boilers, compressed natural gas and hydrogen. We also detail case studies in Germany which is planning a 100% renewable energy switch by 2050 and developing the storage of compressed air in China, with emphasis on technical and economic aspects. The global energy consumption in 2020 was 30.01% for the industry, 26.18% for transport, and 22.08% for residential sectors. 10-40% of energy consumption can be reduced using renewable energy sources, passive design strategies, smart grid analytics, energy-efficient building systems, and intelligent energy monitoring. Electric vehicles offer the highest cost-per-kilometer reduction of 75% and the lowest energy loss of 33%, yet battery-related issues, cost, and weight are challenging. 5-30% of energy can be saved using automated and networked vehicles. Artificial intelligence shows a huge potential in energy saving by improving weather forecasting and machine maintenance and enabling connectivity across homes, workplaces, and transportation. For instance, 18.97-42.60% of energy consumption can be reduced in buildings through deep neural networking. In the electricity sector, artificial intelligence can automate power generation, distribution, and transmission operations, balance the grid without human intervention, enable lightning-speed trading and arbitrage decisions at scale, and eliminate the need for manual adjustments by end-users.

[reaction:see text] Candida antarctica lipase was shown to catalyze alcoholysis, ammoniolysis, and perhydrolysis reactions using the ionic liquids 1-butyl-3-methylimidazolium tetrafluoroborate or hexafluorophosphate as reaction media. Reaction rates were generally comparable with, or better than, those observed in organic media.

The rising amount of waste generated worldwide is inducing issues of pollution, waste management, and recycling, calling for new strategies to improve the waste ecosystem, such as the use of artificial intelligence. Here, we review the application of artificial intelligence in waste-to-energy, smart bins, waste-sorting robots, waste generation models, waste monitoring and tracking, plastic pyrolysis, distinguishing fossil and modern materials, logistics, disposal, illegal dumping, resource recovery, smart cities, process efficiency, cost savings, and improving public health. Using artificial intelligence in waste logistics can reduce transportation distance by up to 36.8%, cost savings by up to 13.35%, and time savings by up to 28.22%. Artificial intelligence allows for identifying and sorting waste with an accuracy ranging from 72.8 to 99.95%. Artificial intelligence combined with chemical analysis improves waste pyrolysis, carbon emission estimation, and energy conversion. We also explain how efficiency can be increased and costs can be reduced by artificial intelligence in waste management systems for smart cities.

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

The mystery of how 1,3-substituted imidazolium-based ionic liquids (ILs) can provide high stabilization for transition-metal(0) nanoclusters, that is, in the absence of the usual strongly coordinating anions, has been probed. 2H NMR product and kinetic studies of 1,3-substituted imidazolium ILs under D2 reveal that nanocluster-catalyzed H/D exchange occurs at the 2- (as well as at the 4-, 5-, and 8-) C-H positions of the imidazolium cation. The results (i) provide compelling evidence that N-heterocyclic carbene formation and ligation of nanoclusters is occurring in ILs; and (ii) argue that N-heterocyclic carbenes merit further investigation as heretofore unappreciated stabilizers of transition-metal nanoclusters.

Universities are in a current state of transition, whereby they are expected to develop a wide range of relationships with stakeholders in order to enhance regional innovation systems. However, despite external environmental pressures commonly regarded as one of the main drivers of business model evolution, there is a lack of studies that explore business model innovation as a result of multiple stakeholder influences. Accordingly, the aim of this paper is to examine the changing university business model within a region of the U nited K ingdom, using a stakeholder perspective that will aid theoretical development and refinement in both the business model and stakeholder fields. This examination is aided by consideration of the university business model as an activity system. Repeat interviews, combined with stakeholder theory, have been used to show how the changing university business model–stakeholder relationship has progressed through different stakeholder stages with resultant changes in content, structure and governance. Furthermore, conflicting objectives between each of the stakeholder groups (i.e. academics, industry liaison staff, technology transfer office staff and government support agency representatives) have led to the university business model evolving not as a process of co‐creation but rather in a series of transitions whereby multiple stakeholders are continually shaping the university business model through strategies that are dependent upon their salience. Finally, this paper contributes to the development and refinement of business model innovation research, in that the use of stakeholder constructs can illustrate the impact of multiple stakeholders' power and influence on business model innovation.

Abstract The extensive use of petroleum-based synthetic and non-biodegradable materials for packaging applications has caused severe environmental damage. The rising demand for sustainable packaging materials has encouraged scientists to explore abundant unconventional materials. For instance, cellulose, extracted from lignocellulosic biomass, has gained attention owing to its ecological and biodegradable nature. This article reviews the extraction of cellulose nanoparticles from conventional and non-conventional lignocellulosic biomass, and the preparation of cellulosic nanocomposites for food packaging. Cellulosic nanocomposites exhibit exceptional mechanical, biodegradation, optical and barrier properties, which are attributed to the nanoscale structure and the high specific surface area, of 533 m 2 g −1 , of cellulose. The mechanical properties of composites improve with the content of cellulose nanoparticles, yet an excessive amount induces agglomeration and, in turn, poor mechanical properties. Addition of cellulose nanoparticles increases tensile properties by about 42%. Barrier properties of the composites are reinforced by cellulose nanoparticles; for instance, the water vapor permeability decreased by 28% in the presence of 5 wt% cellulose nanoparticles. Moreover, 1 wt% addition of filler decreased the oxygen transmission rate by 21%. We also discuss the eco-design process, designing principles and challenges.

Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.

Controlled, multimode microwave irradiation has been employed in a generic solvent-free process to prepare a wide range of ionic liquids based on nitrogen-containing heterocycles. The developed method offers a flexible, small to large-scale approach to prepare ionic liquids, in either sealed or open vessels, in a faster and greener process than any previously described.

Enzymatic stereodivergent synthesis to access all possible product stereoisomers bearing multiple stereocenters is relatively undeveloped, although enzymes are being increasingly used in both academic and industrial areas. When two stereocenters and thus four stereoisomeric products are involved, obtaining stereodivergent enzyme mutants for individually accessing all four stereoisomers would be ideal. Although significant success has been achieved in directed evolution of enzymes in general, stereodivergent engineering of one enzyme into four highly stereocomplementary variants for obtaining the full complement of stereoisomers bearing multiple stereocenters remains a challenge. Using Candida antarctica lipase B (CALB) as a model, we report the protein engineering of this enzyme into four highly stereocomplementary variants needed for obtaining all four stereoisomers in transesterification reactions between racemic acids and racemic alcohols in organic solvents. By generating and screening less than 25 variants of each isomer, we achieved >90% selectivity for all of the four possible stereoisomers in the model reaction. This difficult feat was accomplished by developing a strategy dubbed "focused rational iterative site-specific mutagenesis" (FRISM) at sites lining the enzyme's binding pocket. The accumulation of single mutations by iterative site-specific mutagenesis using a restricted set of rationally chosen amino acids allows the formation of ultrasmall mutant libraries requiring minimal screening for stereoselectivity. The crystal structure of all stereodivergent CALB variants, flanked by MD simulations, uncovered the source of selectivity.

Abstract

The development and recycling of biomass production can partly solve issues of energy, climate change, population growth, food and feed shortages, and environmental pollution. For instance, the use of seaweeds as feedstocks can reduce our reliance on fossil fuel resources, ensure the synthesis of cost-effective and eco-friendly products and biofuels, and develop sustainable biorefinery processes. Nonetheless, seaweeds use in several biorefineries is still in the infancy stage compared to terrestrial plants-based lignocellulosic biomass. Therefore, here we review seaweed biorefineries with focus on seaweed production, economical benefits, and seaweed use as feedstock for anaerobic digestion, biochar, bioplastics, crop health, food, livestock feed, pharmaceuticals and cosmetics. Globally, seaweeds could sequester between 61 and 268 megatonnes of carbon per year, with an average of 173 megatonnes. Nearly 90% of carbon is sequestered by exporting biomass to deep water, while the remaining 10% is buried in coastal sediments. 500 gigatonnes of seaweeds could replace nearly 40% of the current soy protein production. Seaweeds contain valuable bioactive molecules that could be applied as antimicrobial, antioxidant, antiviral, antifungal, anticancer, contraceptive, anti-inflammatory, anti-coagulants, and in other cosmetics and skincare products.

BACKGROUND: Healthy movement behaviours of Canadian children and youth have been found to be suboptimal; this is associated with declines in physical fitness, increases in obesity, and elevated chronic disease risk. Physical literacy is an evolving construct representing foundational domains upon which physically active lifestyles are based. Many sectors and organizations in Canada are embracing physical literacy in their programs, practices, policies, and research; however, the use of inconsistent definitions and conceptualizations of physical literacy had been identified by stakeholders as hindering promotion and advancement efforts. METHODS: With leadership from ParticipACTION, organizations from the physical activity, public health, sport, physical education, and recreation sectors collaborated to create a physical literacy consensus definition and position statement for use by all Canadian organizations and individuals. The process involved an environmental scan, survey of related evidence, stakeholder consultations, and creation of a Steering Committee. From this background work a consensus statement was drafted, shared with stakeholders, revised, and ratified. RESULTS: Canada's Physical Literacy Consensus Statement was launched in June 2015 at the International Physical Literacy Conference in Vancouver, British Columbia. To further promote the Consensus Statement, the Sport for Life Society developed and simultaneously released the "Vancouver Declaration", which contained additional guidance on physical literacy. Both the Consensus Statement and the Declaration endorsed the International Physical Literacy Association's definition of physical literacy, namely "the motivation, confidence, physical competence, knowledge and understanding to value and take responsibility for engagement in physical activities for life". CONCLUSIONS: Sector partners hope that the Consensus Statement, with its standardized definition, brings greater harmony, synergy, and consistency to physical literacy efforts in Canada and internationally. Going forward, the impact of this initiative on the sector, and the more distal goal of increasing habitual physical activity levels, should be assessed.

Abstract Rural areas are recognised for their complex, multifunctional capacities with a range of different interest groups claiming their rights to, and use of, different rural spaces. The current rural development paradigm that is evident across the globe is epitomised by the European LEADER approach. Using evidence from the proposed National Park in Northern Ireland, we ask the question: what is the potential for sustainable rural tourism to contribute to rural development? In our analysis we consider the scope for adaptive tourism to overcome some of the ongoing challenges that have been identified in the LEADER approach. Four themes are revealed from this analysis: institutional (in)capacity, legitimacy of local groups, navigating between stakeholder interests and sustainable tourism in practice. These issues, discussed in turn, have clear implications for the new rural development programme.

The nutritional value of meat is an increasingly important factor influencing consumer preferences for poultry, red meat and processed meat products. Intramuscular fat content and composition, in addition to high quality protein, trace minerals and vitamins are important determinants of nutritional value. Fat content of meat at retail has decreased substantially over the past 40 years through advances in animal genetics, nutrition and management and changes in processing techniques. Evidence of the association between diet and the incidence of human non-communicable diseases has driven an interest in developing production systems for lowering total SFA and trans fatty acid (TFA) content and enrichment of n-3 PUFA concentrations in meat and meat products. Typically, poultry and pork has a lower fat content, containing higher PUFA and lower TFA concentrations than lamb or beef. Animal genetics, nutrition and maturity, coupled with their rumen microbiome, are the main factors influencing tissue lipid content and relative proportions of SFA, MUFA and PUFA. Altering the fatty acid (FA) profile of lamb and beef is determined to a large extent by extensive plant and microbial lipolysis and subsequent microbial biohydrogenation of dietary lipid in the rumen, and one of the major reasons explaining the differences in lipid composition of meat from monogastrics and ruminants. Nutritional strategies can be used to align the fat content and FA composition of poultry, pork, lamb and beef with Public Health Guidelines for lowering the social and economic burden of chronic disease.

Abstract Herein, activated carbon (AC) and carbon nanotubes (CNTs) were synthesised from potato peel waste (PPW). Different ACs were synthesised via two activation steps: firstly, with phosphoric acid (designated PP) and then using potassium hydroxide (designated PK). The AC produced after the two activation steps showed a surface area as high as 833 m 2 g −1 with a pore volume of 0.44 cm 3 g −1 , where the raw material of PPW showed a surface area < 4 m 2 g −1 . This can help aid and facilitate the concept of the circular economy by effectively up-cycling and valorising waste lignocellulosic biomass such as potato peel waste to high surface area AC and subsequently, multi-walled carbon nanotubes (MWCNTs). Consequently, MWCNTs were prepared from the produced AC by mixing it with the nitrogen-based material melamine and iron precursor, iron (III) oxalate hexahydrate. This produced hydrophilic multi-wall carbon nanotubes (MWCNTs) with a water contact angle of θ = 14.97 °. Both AC and CNT materials were used in heavy metal removal (HMR) where the maximum lead absorption was observed for sample PK with a 84% removal capacity after the first hour of testing. This result signifies that the synthesis of these up-cycled materials can have applications in areas such as wastewater treatment or other conventional AC/CNT end uses with a rapid cycle time in a two-fold approach to improve the eco-friendly synthesis of such value-added products and the circular economy from a significant waste stream, i.e., PPW.

The use of 1,3-dimethylimidazolium-2-carboxylate as an organocatalyst for the glycolysis of waste PET, poly(ethylene terephthalate), is reported for the first time. Postconsumer PET was completely depolymerized in less than 1 h at 180 °C with up to 60% of bis(2-hydroxyethyl terephthalate) (BHET) recovered by precipitation after cooling the reaction mixture. Under comparable conditions, the basic ionic liquid, 1,3-dimethylimidazolium acetate, was a significantly less effective catalyst suggesting that catalysis occurs through formation of a nucleophilic N-heterocyclic carbene.

As the integrated education movement in Northern Ireland passes its twenty‐first anniversary, it is pertinent to explore the legacy of mixed Catholic and Protestant schooling. This paper summarises the findings of different studies regarding the impact of integrated education in Northern Ireland on social identity, intergroup attitudes and forgiveness and reconciliation. The research is discussed in relation to its implications for the theory and practice of integrated education in Northern Ireland and also for other societies with a legacy of ethnopolitical conflict. It proposes that integrated education in Northern Ireland impacts positively on identity, outgroup attitudes, forgiveness and reconciliation, providing hope and encouragement for co‐education strategies in other countries that have suffered from prolonged conflict. Despite a number of challenges, it is clear from the research presented here that integrated education holds great potential both for building social cohesion and for promoting forgiveness and reconciliation.