Technical University of Crete

Understanding and quantifying the global methane (CH4) budget is important for assessing realistic pathways to mitigate climate change. Atmospheric emissions and concentrations of CH4 continue to increase, making CH4 the second most important human-influenced greenhouse gas in terms of climate forcing, after carbon dioxide (CO2). The relative importance of CH4 compared to CO2 depends on its shorter atmospheric\nlifetime, stronger warming potential, and variations in atmospheric growth rate over the past decade, the causes of which are still debated. Two major challenges in reducing uncertainties in the atmospheric growth rate arise from the variety of geographically overlapping CH4 sources and from the destruction of CH4 by short-lived hydroxyl radicals (OH). To address these challenges, we have established a consortium of multidisciplinary scientists under the umbrella of the Global Carbon Project to synthesize and stimulate new research aimed at improving and regularly updating the global methane budget. Following Saunois et al. (2016), we present here the second version of the living review paper dedicated to the decadal methane budget, integrating results of top-down studies (atmospheric observations within an atmospheric inverse-modelling framework) and bottom-up estimates (including process-based models for estimating land surface emissions and atmospheric chemistry, inventories of anthropogenic emissions, and data-driven extrapolations).\nFor the 2008–2017 decade, global methane emissions are estimated by atmospheric inversions (a top-down approach) to be 576 TgCH4 yr-1 (range 550–594, corresponding to the minimum and maximum estimates of the model ensemble). Of this total, 359 TgCH4 yr-1 or 60% is attributed to anthropogenic sources, that is emissions caused by direct human activity (i.e. anthropogenic emissions; range 336–376 TgCH4 yr-1 or 50 %–65 %). The mean annual total emission for the new decade (2008–2017) is 29 TgCH4 yr-1 larger than our estimate for the previous decade (2000–2009), and 24 TgCH4 yr-1 larger than the one reported in the previous budget for 2003–2012 (Saunois et al., 2016). Since 2012, global CH4 emissions have been tracking the warmest scenarios assessed by the Intergovernmental Panel on Climate Change. Bottom-up methods suggest almost 30% larger global emissions (737 TgCH4 yr-1, range 594–881) than top-down inversion methods. Indeed, bottom-up estimates for natural sources such as natural wetlands, other inland water systems, and geological sources are higher than top-down estimates. The atmospheric constraints on the top-down budget suggest that at least some of these bottom-up emissions are overestimated. The latitudinal distribution of atmospheric observation-based emissions indicates a predominance of tropical emissions (∼65% of the global budget, <30◦N) compared to mid-latitudes (∼30 %, 30–60◦ N) and high northern latitudes (∼4 %, 60–90◦N). The most important source of uncertainty in the methane budget is attributable to natural emissions, especially those from wetlands and other inland waters.\nSome of our global source estimates are smaller than those in previously published budgets (Saunois et al., 2016; Kirschke et al., 2013). In particular wetland emissions are about 35 TgCH4 yr-1 lower due to improved partition wetlands and other inland waters. Emissions from geological sources and wild animals are also found to be smaller by 7 TgCH4 yr-1 by 8 TgCH4 yr-1, respectively. However, the overall discrepancy between bottom-up and top-down estimates has been reduced by only 5% compared to Saunois et al. (2016), due to a higher estimate of emissions from inland waters, highlighting the need for more detailed research on emissions factors. Priorities for improving the methane budget include (i) a global, high-resolution map of water-saturated soils and inundated areas emitting methane based on a robust classification of different types of emitting habitats; (ii) further development of process-based models for inland-water emissions; (iii) intensification of methane observations at local scales (e.g., FLUXNET-CH4 measurements) and urban-scale monitoring to constrain bottom-up land surface models, and at regional scales (surface networks and satellites) to constrain atmospheric inversions; (iv) improvements of transport models and the representation of photochemical sinks in top-down inversions; and (v) development of a 3D variational inversion system using isotopic and/or co-emitted species such as ethane to improve source partitioning.\nThe data presented here can be downloaded from https://doi.org/10.18160/GCP-CH4-2019 (Saunois et al.,\n2020) and from the Global Carbon Project

This paper considers the problem of downlink transmit beamforming for wireless transmission and downstream precoding for digital subscriber wireline transmission, in the context of common information broadcasting or multicasting applications wherein channel state information (CSI) is available at the transmitter. Unlike the usual "blind" isotropic broadcasting scenario, the availability of CSI allows transmit optimization. A minimum transmission power criterion is adopted, subject to prescribed minimum received signal-to-noise ratios (SNRs) at each of the intended receivers. A related max-min SNR "fair" problem formulation is also considered subject to a transmitted power constraint. It is proven that both problems are NP-hard; however, suitable reformulation allows the successful application of semidefinite relaxation (SDR) techniques. SDR yields an approximate solution plus a bound on the optimum value of the associated cost/reward. SDR is motivated from a Lagrangian duality perspective, and its performance is assessed via pertinent simulations for the case of Rayleigh fading wireless channels. We find that SDR typically yields solutions that are within 3-4 dB of the optimum, which is often good enough in practice. In several scenarios, SDR generates exact solutions that meet the associated bound on the optimum value. This is illustrated using measured very-high-bit-rate Digital Subscriber line (VDSL) channel data, and far-field beamforming for a uniform linear transmit antenna array.

Maximum power point tracking (MPPT) is used in photovoltaic (PV) systems to maximize the photovoltaic array output power, irrespective of the temperature and irradiation conditions and of the load electrical characteristics. A new MPPT system has been developed, consisting of a buck-type DC/DC converter, which is controlled by a microcontroller-based unit. The main difference between the method used in the proposed MPPT system and other techniques used in the past is that the PV array output power is used to directly control the DC/DC converter, thus reducing the complexity of the system. The resulting system has high-efficiency, lower-cost and can be easily modified to handle more energy sources (e.g., wind-generators). The experimental results show that the use of the proposed MPPT control increases the PV output power by as much as 15% compared to the case where the DC/DC converter duty cycle is set such that the PV array produces the maximum power at 1 kW/m/sup 2/ and 25/spl deg/C.

Traffic congestion in urban road and freeway networks leads to a strong degradation of the network infrastructure and accordingly reduced throughput, which can be countered via suitable control measures and strategies. After illustrating the main reasons for infrastructure deterioration due to traffic congestion, a comprehensive overview of proposed and implemented control strategies is provided for three areas: urban road networks, freeway networks, and route guidance. Selected application results, obtained from either simulation studies or field implementations, are briefly outlined to illustrate the impact of various control actions and strategies. The paper concludes with a brief discussion of future needs in this important technical area.

In this primer, we give a review of the inverse problem for EEG source localization. This is intended for the researchers new in the field to get insight in the state-of-the-art techniques used to find approximate solutions of the brain sources giving rise to a scalp potential recording. Furthermore, a review of the performance results of the different techniques is provided to compare these different inverse solutions. The authors also include the results of a Monte-Carlo analysis which they performed to compare four non parametric algorithms and hence contribute to what is presently recorded in the literature. An extensive list of references to the work of other researchers is also provided. This paper starts off with a mathematical description of the inverse problem and proceeds to discuss the two main categories of methods which were developed to solve the EEG inverse problem, mainly the non parametric and parametric methods. The main difference between the two is to whether a fixed number of dipoles is assumed a priori or not. Various techniques falling within these categories are described including minimum norm estimates and their generalizations, LORETA, sLORETA, VARETA, S-MAP, ST-MAP, Backus-Gilbert, LAURA, Shrinking LORETA FOCUSS (SLF), SSLOFO and ALF for non parametric methods and beamforming techniques, BESA, subspace techniques such as MUSIC and methods derived from it, FINES, simulated annealing and computational intelligence algorithms for parametric methods. From a review of the performance of these techniques as documented in the literature, one could conclude that in most cases the LORETA solution gives satisfactory results. In situations involving clusters of dipoles, higher resolution algorithms such as MUSIC or FINES are however preferred. Imposing reliable biophysical and psychological constraints, as done by LAURA has given superior results. The Monte-Carlo analysis performed, comparing WMN, LORETA, sLORETA and SLF, for different noise levels and different simulated source depths has shown that for single source localization, regularized sLORETA gives the best solution in terms of both localization error and ghost sources. Furthermore the computationally intensive solution given by SLF was not found to give any additional benefits under such simulated conditions.

Spectral observations along the spectrum in many narrow spectral bands through hyperspectral imaging provides valuable information towards material and object recognition, which can be consider as a classification task. Most of the existing studies and research efforts are following the conventional pattern recognition paradigm, which is based on the construction of complex handcrafted features. However, it is rarely known which features are important for the problem at hand. In contrast to these approaches, we propose a deep learning based classification method that hierarchically constructs high-level features in an automated way. Our method exploits a Convolutional Neural Network to encode pixels' spectral and spatial information and a Multi-Layer Perceptron to conduct the classification task. Experimental results and quantitative validation on widely used datasets showcasing the potential of the developed approach for accurate hyperspectral data classification.

A wind-generator (WG) maximum-power-point-tracking (MPPT) system is presented, consisting of a high-efficiency buck-type dc/dc converter and a microcontroller-based control unit running the MPPT function. The advantages of the proposed MPPT method are that no knowledge of the WG optimal power characteristic or measurement of the wind speed is required and the WG operates at a variable speed. Thus, the system features higher reliability, lower complexity and cost, and less mechanical stress of the WG. Experimental results of the proposed system indicate near-optimal WG output power, increased by 11%-50% compared to a WG directly connected via a rectifier to the battery bank. Thus, better exploitation of the available wind energy is achieved, especially under low wind speeds.

Abstract Advanced oxidation comprises a range of similar but different chemical processes aimed at tackling pollution in water, air and soil. Over the past few decades, multidisciplinary research has been carried out to study a broad spectrum of topics such as understanding of process fundamentals, elucidation of kinetics and mechanisms, development of new materials, modelling, process integration and scale‐up. This article identifies and discusses certain directions that seem to advance R&D on advanced oxidation for water/wastewater treatment. Copyright © 2008 Society of Chemical Industry

Several continuous-time and discrete-time recurrent neural network models have been developed and applied to various engineering problems. One of the difficulties encountered in the application of recurrent networks is the derivation of efficient learning algorithms that also guarantee the stability of the overall system. This paper studies the approximation and learning properties of one class of recurrent networks, known as high-order neural networks; and applies these architectures to the identification of dynamical systems. In recurrent high-order neural networks, the dynamic components are distributed throughout the network in the form of dynamic neurons. It is shown that if enough high-order connections are allowed then this network is capable of approximating arbitrary dynamical systems. Identification schemes based on high-order network architectures are designed and analyzed.

Recurrent and nonrecurrent congestion on freeways may be alleviated if today's "spontaneous" infrastructure utilization is replaced by an orderly, controllable operation via comprehensive application of ramp metering and freeway-to-freeway control, combined with powerful optimal control techniques. This paper first explains why ramp metering can lead to a dramatic amelioration of traffic conditions on freeways. An overview of ramp metering algorithms is provided next, ranging from early fixed-time approaches to traffic-responsive regulators and to modern sophisticated nonlinear optimal control schemes. Finally, a large-scale example demonstrates the high potential of advanced ramp metering approaches.

This paper reviews state-of-the-art research solutions across the spectrum of medical imaging informatics, discusses clinical translation, and provides future directions for advancing clinical practice. More specifically, it summarizes advances in medical imaging acquisition technologies for different modalities, highlighting the necessity for efficient medical data management strategies in the context of AI in big healthcare data analytics. It then provides a synopsis of contemporary and emerging algorithmic methods for disease classification and organ/ tissue segmentation, focusing on AI and deep learning architectures that have already become the de facto approach. The clinical benefits of in-silico modelling advances linked with evolving 3D reconstruction and visualization applications are further documented. Concluding, integrative analytics approaches driven by associate research branches highlighted in this study promise to revolutionize imaging informatics as known today across the healthcare continuum for both radiology and digital pathology applications. The latter, is projected to enable informed, more accurate diagnosis, timely prognosis, and effective treatment planning, underpinning precision medicine.

The ten principles of GSP are presented with the aim of establishing a road map toward the development of overall greener analytical methodologies. Paramount aspects for greening sample preparation and their interconnections are identified and discussed. These include the use of safe solvents/reagents and materials that are renewable, recycled and reusable, minimizing waste generation and energy demand, and enabling high sample throughput, miniaturization, procedure simplification/automation, and operator's safety. Further, the importance of applying green metrics for assessing the greenness of sample preparation methods is highlighted, next to the contribution of GSP in achieving the broader goal of sustainability. Green sample preparation is sample preparation. It is not a new subdiscipline of sample preparation but a guiding principle that promotes sustainable development through the adoption of environmentally benign sample preparation procedures.

This paper considers the problem of simultaneous multiuser downlink beamforming. The idea is to employ a transmit antenna array to create multiple "beams" directed toward the individual users, and the aim is to increase throughput, measured by sum capacity. In particular, we are interested in the practically important case of more users than transmit antennas, which requires user selection. Optimal solutions to this problem can be prohibitively complex for online implementation at the base station and entail so-called Dirty Paper (DP) precoding for known interference. Suboptimal solutions capitalize on multiuser (selection) diversity to achieve a significant fraction of sum capacity at lower complexity cost. We analyze the throughput performance in Rayleigh fading of a suboptimal greedy DP-based scheme proposed by Tu and Blum. We also propose another user-selection method of the same computational complexity based on simple zero-forcing beamforming. Our results indicate that the proposed method attains a significant fraction of sum capacity and throughput of Tu and Blum's scheme and, thus, offers an attractive alternative to DP-based schemes.

Purpose This paper aims to examine the determinants of performance of Greek banks during the period of EU financial integration (1990‐2002). Design/methodology/approach The approach is to use an unbalanced pooled time series dataset of 23 banks. Findings High return on average assets (ROAA) was found to be associated with well‐capitalized banks and lower cost to income ratios. Size was positive in all cases but statistically significant only when the macroeconomic and financial structure variables entered the models. Turning to macroeconomics and financial structure, the growth of gross domestic product (GDP) has a significant and positive impact on ROAA, while inflation has a significant negative impact. Originality/value The paper's value lies in showing that money supply growth has no significant impact on profits, whereas the ratios banks' assets to GDP, stock market capitalization to banks assets and concentration are all statistical significant and negatively related to ROAA.

The problem of transmit beamforming to multiple cochannel multicast groups is considered, when the channel state is known at the transmitter and from two viewpoints: minimizing total transmission power while guaranteeing a prescribed minimum signal-to-interference-plus-noise ratio (SINR) at each receiver; and a "fair" approach maximizing the overall minimum SINR under a total power budget. The core problem is a multicast generalization of the multiuser downlink beamforming problem; the difference is that each transmitted stream is directed to multiple receivers, each with its own channel. Such generalization is relevant and timely, e.g., in the context of the emerging WiMAX and UMTS-LTE wireless networks. The joint problem also contains single-group multicast beamforming as a special case. The latter (and therefore also the former) is NP-hard. This motivates the pursuit of computationally efficient quasi-optimal solutions. It is shown that Lagrangian relaxation coupled with suitable randomization/cochannel multicast power control yield computationally efficient high-quality approximate solutions. For a significant fraction of problem instances, the solutions generated this way are exactly optimal. Extensive numerical results using both simulated and measured wireless channels are presented to corroborate our main findings.

Anthropogenic climate change is expected to affect global river flow. Here, we analyze time series of low, mean, and high river flows from 7250 observatories around the world covering the years 1971 to 2010. We identify spatially complex trend patterns, where some regions are drying and others are wetting consistently across low, mean, and high flows. Trends computed from state-of-the-art model simulations are consistent with the observations only if radiative forcing that accounts for anthropogenic climate change is considered. Simulated effects of water and land management do not suffice to reproduce the observed trend pattern. Thus, the analysis provides clear evidence for the role of externally forced climate change as a causal driver of recent trends in mean and extreme river flow at the global scale.

Many alternative models have been proposed to address some of the shortcomings of the hidden Markov model (HMM), which is currently the most popular approach to speech recognition. In particular, a variety of models that could be broadly classified as segment models have been described for representing a variable-length sequence of observation vectors in speech recognition applications. Since there are many aspects in common between these approaches, including the general recognition and training problems, it is useful to consider them in a unified framework. The paper describes a general stochastic model that encompasses most of the models proposed in the literature, pointing out similarities of the models in terms of correlation and parameter tying assumptions, and drawing analogies between segment models and HMMs. In addition, we summarize experimental results assessing different modeling assumptions and point out remaining open questions.

Abstract Olive mill wastewater (OMW) arises from the production of olive oil in olive mills. It is produced seasonally by a large number of small olive mills scattered throughout the olive oil‐producing countries. OMW has a very high organic load, recalcitrant in nature and with a high amount of toxicity/phytotoxicity‐associated compounds. Several physicochemical, biological and combined processes have been examined for the treatment of OMW, resulting in considerable organic load and toxicity abatement. Biological processes, aerobic and anaerobic, including anaerobic co‐digestion with other effluents and composting, are predominant in the treatment of OMW. Advanced oxidation processes have attracted much attention owing to the strong oxidation potential of the agents used, which can result in a high degree of treatment. Recent research studies employing physical, chemical, biological and combined technologies are reviewed in the current work. Copyright © 2006 Society of Chemical Industry

Increase of the ambient air temperature in cities caused by the urban heat island phenomenon has a seri- ous impact on the economic and social system of cities. to counterbalance the consequences of the increased urban temperatures important research has been carried out resulting in the development of efficient mitigation technologies. the present paper aims to present the state of the art in terms of local climate change and urban heat island mitigation techniques. In particular, developments in the field on highly reflective materials, cool and green roofs, cool pavements, urban green and of other mitigation technologies are presented in detail, while examples of implemented projects are given.

An evolutionary algorithm based framework, a combination of modified breeder genetic algorithms incorporating characteristics of classic genetic algorithms, is utilized to design an offline/online path planner for unmanned aerial vehicles (UAVs) autonomous navigation. The path planner calculates a curved path line with desired characteristics in a three-dimensional (3-D) rough terrain environment, represented using B-spline curves, with the coordinates of its control points being the evolutionary algorithm artificial chromosome genes. Given a 3-D rough environment and assuming flight envelope restrictions, two problems are solved: i) UAV navigation using an offline planner in a known environment, and, ii) UAV navigation using an online planner in a completely unknown environment. The offline planner produces a single B-Spline curve that connects the starting and target points with a predefined initial direction. The online planner, based on the offline one, is given on-board radar readings which gradually produces a smooth 3-D trajectory aiming at reaching a predetermined target in an unknown environment; the produced trajectory consists of smaller B-spline curves smoothly connected with each other. Both planners have been tested under different scenarios, and they have been proven effective in guiding an UAV to its final destination, providing near-optimal curved paths quickly and efficiently.