Tekirdağ Namık Kemal University

The high cost of powerful, large-stroke, high-stress artificial muscles has combined with performance limitations such as low cycle life, hysteresis, and low efficiency to restrict applications. We demonstrated that inexpensive high-strength polymer fibers used for fishing line and sewing thread can be easily transformed by twist insertion to provide fast, scalable, nonhysteretic, long-life tensile and torsional muscles. Extreme twisting produces coiled muscles that can contract by 49%, lift loads over 100 times heavier than can human muscle of the same length and weight, and generate 5.3 kilowatts of mechanical work per kilogram of muscle weight, similar to that produced by a jet engine. Woven textiles that change porosity in response to temperature and actuating window shutters that could help conserve energy were also demonstrated. Large-stroke tensile actuation was theoretically and experimentally shown to result from torsional actuation.

Abstract Social media and social media applications that build consumer communities involving rich user-generated content are new marketplaces and/or tools for marketers. This study aims to specify the factors affecting consumers' attitudes toward marketing with social media. Given this context, a 7-factor, consumer-based attitude scale that contains 32 items was developed, and a questionnaire was completed by undergraduate students between the ages of 18 and 24. Frequencies, t-test, ANOVA, factor analysis, and regression analysis were used for data analysis. In the end, six factors were found to affect consumers' attitudes toward marketing with social media. KEYWORDS: consumer attitudessocial mediasocial media marketingsocial Web Notes Note. VIF = variance inflation factor. Mashups define the new generation of Web-based applications that combine at least two different services (Akar Citation2009, 51). Dündar and Yörük's (2009) methodology was followed in this empirical study.

There is increasing public concern regarding the fate of antibiotic resistance genes (ARGs) during wastewater treatment, their persistence during the treatment process and their potential impacts on the receiving water bodies. In this study, we used quantitative PCR (qPCR) to determine the abundance of nine ARGs and a class 1 integron associated integrase gene in 16 wastewater treatment plant (WWTP) effluents from ten different European countries. In order to assess the impact on the receiving water bodies, gene abundances in the latter were also analysed. Six out of the nine ARGs analysed were detected in all effluent and river water samples. Among the quantified genes, intI1 and sul1 were the most abundant. Our results demonstrate that European WWTP contribute to the enrichment of the resistome in the receiving water bodies with the particular impact being dependent on the effluent load and local hydrological conditions. The ARGs concentrations in WWTP effluents were found to be inversely correlated to the number of implemented biological treatment steps, indicating a possible option for WWTP management. Furthermore, this study has identified blaOXA-58 as a possible resistance gene for future studies investigating the impact of WWTPs on their receiving water.

The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost necessary in order to have more reliable composite manufacturing since the residual stresses alter the internal stress level of the composite part during the service life and the residual shape distortions may lead to not meeting the desired geometrical tolerances. The occurrence of residual stresses during the manufacturing process inherently contains diverse interactions between the involved physical phenomena mainly related to material flow, heat transfer and polymerization or crystallization. Development of numerical process models is required for virtual design and optimization of the composite manufacturing process which avoids the expensive trial-and-error based approaches. The process models as well as applications focusing on the prediction of residual stresses and shape distortions taking place in composite manufacturing are discussed in this study. The applications on both thermoset and thermoplastic based composites are reviewed in detail.

Electrochemical impedance spectroscopy (EIS) is a sensitive technique for the analysis of the interfacial properties related to biorecognition events such as reactions catalyzed by enzymes, biomolecular recognition events of specific binding proteins, lectins, receptors, nucleic acids, whole cells, antibodies or antibody-related substances, occurring at the modified surface. Many studies on impedimetric biosensors are focused on immunosensors and aptasensors. In impedimetric immunosensors, antibodies and antigens are bound each other and thus immunocomplex is formed and the electrode is coated with a blocking layer. As a result of that electron transfer resistance increases. In impedimetric aptasensors, impedance changes following the binding of target sequences, conformational changes, or DNA damages. Impedimetric biosensors allow direct detection of biomolecular recognition events without using enzyme labels. In this paper, impedimetric biosensors are reviewed and the most interesting ones are discussed.

Using “3D-spacer” technology, we have knitted 80% β-phase PVDF with Ag/PA66 fibres to demonstrate all fibre piezoelectric power generators. The 3D structure provides a power density of 1.10–5.10 μW cm⁻²at applied impacts of 0.02–0.10 MPa.

AIM: To evaluate the antibacterial effect of curcumin with the minimum inhibitory concentration (MIC) method in standard bacterial strains. METHODS: The in vitro antibacterial activity of curcumin was evaluated against methicillin-sensitive Staphylococcus aureus (MSSA) (ATCC 29213), methicillin-resistant Staphylococcus aureus (MRSA) (ATCC 43300), Enterococcus faecalis (ATCC 29212), Bacillus subtilis (ATCC 6633), Pseudomonas aeruginosa (ATCC 27853), Escherichia coli (ATCC 25922) and Klebsiella pneumoniae (ATCC 700603) using the macrodilution broth susceptibility test method. After incubation in tubes, the antibacterial activity of curcumin was detected by a lack of turbidity, which indicated the inhibition of bacterial growth. The concentration in the tube with the highest dilution showing no turbidity was defined as the MIC. RESULTS: The curcumin MIC values were 175 µg/ml, 129 µg/ml, 219 µg/ml, 217 µg/ml, 163 µg/ml, 293 µg/ml and 216 µg/ml against P. aeruginosa, B. subtilis, MSSA, MRSA, E. coli, E. faecalis and K. Pneumonia, respectively. CONCLUSION: This study revealed antibacterial effects of curcumin against standard bacterial strains in high concentrations. Animal experiments have demonstrated that curcumin applied at high doses has strong antibacterial activity. There is a need for further in vivo studies to shed light on antibacterial effects of curcumin with high concentrations.

Abstract In this review article, polyurethane (PU) foam materials are presented in various industrial applications. PU foams have started to replace metals and plastics in various engineering applications by combining the hardness and durability of metal with the flexibility of rubber. PU foams can be synthesized with various isocyanates, polyols, chain extenders and crosslinkers to serve many specific applications, such as bio‐based composite foam, flexible hard/soft PU foam, polymer foam etc. There are different factors to change of hard and soft segments of PUs. These changes form different products, such as urethane, biurets, allophanates and isocyamurates, etc. This review article mostly concentrates on the basic chemistry of the building blocks of PUs and recent developments in industrial applications of PU foams, such as insulator material, sound insulators, refrigerator and freezing insulators, furniture, shoes, automotive materials, coatings and adhesives and other applications. © 2022 Society of Industrial Chemistry.

Corrosion of metals is one of the most important problems in the manufacturing industries. Many corrosion control methods use coatings of conducting polymers and conversion layers that contain toxic and environmentally hazardous materials, especially chromium compounds. These objectives have led to the development of new protective coating strategies that employs nanocomposites and carbon-based materials. In recent years, conducting polymers have attracted much attention because of their wide range of industrial applications and economic viability. Polymers possess long-chain carbon linkages and therefore, upon adsorption are able to block large areas of the corroding metal surfaces. The thin films adsorbed on the metal substrate provide a barrier effect between the metal and its environment. This review article summarizes the different techniques used in corrosion protection of metals, conducting polymers and nanomaterials, nanocomposites, and carbon-based materials in corrosion science.

In this paper, structural, elastic, and dynamical properties of Cu${}_{2}$ZnSnS${}_{4}$ and Cu${}_{2}$ZnSnSe${}_{4}$ are calculated for kesterite and stannite structures using the density functional and density functional perturbation theories. The stability of these two materials, either in a kesterite or stannite crystal structure, is verified by using both elastic constants and phonon dispersions results. No significant difference is observed between the calculated energetic, mechanical, and dynamical properties of the kesterite and stannite phases of either compound. Using extensively rich sampled first Brillouin-zone phonon data, relaxation time-dependent lattice thermal conductivities are predicted through the solution of the phonon Boltzmann transport equation. For both compounds, the relaxation time-dependent lattice thermal conductivity of the stannite structure along the $x$ or $y$ directions is found to be $\ensuremath{\sim}$25$%$ larger than its value in the $z$ direction; in contrast, the predicted difference in the kesterite structure is only $\ensuremath{\sim}$5$%$.

Plants are the sources of many bioactive secondary metabolites which are present in plant organs including leaves, stems, roots, and flowers. Although they provide advantages to the plants in many cases, they are not necessary for metabolisms related to growth, development, and reproduction. They are specific to plant species and are precursor substances, which can be modified for generations of various compounds in different plant species. Secondary metabolites are used in many industries, including dye, food processing and cosmetic industries, and in agricultural control as well as being used as pharmaceutical raw materials by humans. For this reason, the demand is high; therefore, they are needed to be obtained in large volumes and the large productions can be achieved using biotechnological methods in addition to production, being done with classical methods. For this, plant biotechnology can be put in action through using different methods. The most important of these methods include tissue culture and gene transfer. The genetically modified plants are agriculturally more productive and are commercially more effective and are valuable tools for industrial and medical purposes as well as being the sources of many secondary metabolites of therapeutic importance. With plant tissue culture applications, which are also the first step in obtaining transgenic plants with having desirable characteristics, it is possible to produce specific secondary metabolites in large-scale through using whole plants or using specific tissues of these plants in laboratory conditions. Currently, many studies are going on this subject, and some of them receiving attention are found to be taken place in plant biotechnology and having promising applications. In this work, particularly benefits of secondary metabolites, and their productions through tissue culture-based biotechnological applications are discussed using literature with presence of current studies.

The experiment was conducted to study the effects of supplementing a broiler starter diet with the probiotic Enterococcus faecium NCIMB 10415 and dried whey (80% lactose) on chick performance, gut histomorphology and intestinal microbiota. One-day-old male Ross 308 strain broiler chickens were fed diets containing: (i) control feed, (ii) control + 3.5% dried whey, (iii) control + 0.2% E. faecium, and (iv) control + 3.5% dried whey + 0.2% E. faecium. Birds were maintained in battery brooders confined in an environmentally controlled experimental room. The experiment lasted for 21 days. Birds fed E. faecium or E. faecium + dried whey exhibited significantly improved weight gain and feed conversion rate (FCR). Weight gain and FCR of treatment groups 1-4 were 628.7, 657.8, 690.9, 689.3 and 1.218, 1.193, 1.107, 1.116, respectively. Lactic acid bacteria counts in both the ileal content and excreta were significantly affected by dietary treatment. Supplementation of the E. faecium and dried whey separately and in combination increased lactic acid bacteria colonization in the ileal content from 4.2 to 5.0, 7.8 and to 5.1 log cfu/g, respectively (treatments 1-4). Similarly, supplementation of dried whey and E. faecium separately and in combination increased lactic acid bacteria in the excreta from 5.3 to 5.5, 8.0 and to 7.2 log cfu/g, respectively. Addition of the probiotic E. faecium increased villus height in the ileum (p < 0.05). Thus, supplementation of E. faecium enhanced broiler chick performance with respect to weight gain and FCR. No additive effect of E. faecium and dried whey was detected. Further studies are needed to investigate the relationship between E. faecium and dried whey with respect to gut histomorphology.

Fusarium species, particularly Fusarium graminearum and F. culmorum, are the main cause of trichothecene type B contamination in cereals. Data on the distribution of Fusarium trichothecene genotypes in cereals in Europe are scattered in time and space. Furthermore, a common core set of related variables (sampling method, host cultivar, previous crop, etc.) that would allow more effective analysis of factors influencing the spatial and temporal population distribution, is lacking. Consequently, based on the available data, it is difficult to identify factors influencing chemotype distribution and spread at the European level. Here we describe the results of a collaborative integrated work which aims (1) to characterize the trichothecene genotypes of strains from three Fusarium species, collected over the period 2000-2013 and (2) to enhance the standardization of epidemiological data collection. Information on host plant, country of origin, sampling location, year of sampling and previous crop of 1147 F. graminearum, 479 F. culmorum, and 3 F. cortaderiae strains obtained from 17 European countries was compiled and a map of trichothecene type B genotype distribution was plotted for each species. All information on the strains was collected in a freely accessible and updatable database (www.catalogueeu.luxmcc.lu), which will serve as a starting point for epidemiological analysis of potential spatial and temporal trichothecene genotype shifts in Europe. The analysis of the currently available European dataset showed that in F. graminearum, the predominant genotype was 15-acetyldeoxynivalenol (15-ADON) (82.9%), followed by 3-acetyldeoxynivalenol (3-ADON) (13.6%), and nivalenol (NIV) (3.5%). In F. culmorum, the prevalent genotype was 3-ADON (59.9%), while the NIV genotype accounted for the remaining 40.1%. Both, geographical and temporal patterns of trichothecene genotypes distribution were identified.

Present technologies for wastewater treatment do not sufficiently address the increasing pollution situation of receiving water bodies, especially with the growing use of personal care products and pharmaceuticals (PPCP) in the private household and health sector. The relevance of addressing this problem of organic pollutants was taken into account by the Directive 2013/39/EU that introduced (i) the quality evaluation of aquatic compartments, (ii) the polluter pays principle, (iii) the need for innovative and affordable wastewater treatment technologies, and (iv) the identification of pollution causes including a list of principal compounds to be monitored. In addition, a watch list of 10 other substances was recently defined by Decision 2015/495 on March 20, 2015. This list contains, among several recalcitrant chemicals, the painkiller diclofenac and the hormones 17β-estradiol and 17α-ethinylestradiol. Although some modern approaches for their removal exist, such as advanced oxidation processes (AOPs), retrofitting most wastewater treatment plants with AOPs will not be acceptable as consistent investment at reasonable operational cost. Additionally, by-product and transformation product formation has to be considered. The same is true for membrane-based technologies (nanofiltration, reversed osmosis) despite of the incredible progress that has been made during recent years, because these systems lead to higher operation costs (mainly due to higher energy consumption) so that the majority of communities will not easily accept them. Advanced technologies in wastewater treatment like membrane bioreactors (MBR) that integrate biological degradation of organic matter with membrane filtration have proven a more complete elimination of emerging pollutants in a rather cost- and labor-intensive technology. Still, most of the presently applied methods are incapable of removing critical compounds completely. In this opinion paper, the state of the art of European WWTPs is reflected, and capacities of single methods are described. Furthermore, the need for analytical standards, risk assessment, and economic planning is stressed. The survey results in the conclusion that combinations of different conventional and advanced technologies including biological and plant-based strategies seem to be most promising to solve the burning problem of polluting our environment with hazardous emerging xenobiotics.

The purpose of the current review article is to present a compherensive understanding regarding pros and cons of carbon nanotube–related nanocomposites and to find ways in order to improve the performance of nanocomposites with new designs. Nanomaterials including carbon nanotubes (CNTs) are employed in industrial applications such as supercapacitors, and biosensors, and etc. The present article has been prepared in three main categories. In the first part, carbon nanotube types have been presented, as single-walled carbon nanotubes, multi-walled carbon nanotubes, and also equivalent circuit models, which have been used to more clarify the experimental measurements of impedance. In the second part, nanocomposites with many carbon, inorganic and polymeric materials such as polymer/CNT, activated carbon/CNT, metal oxide/CNT, and carbon fiber/CNT have been investigated in more detail. In the third part, the focus in on the industrial applications of CNTs. including supercapacitors, biosensors, radar absorbing materials, solar cells, and corrosion protection studies. This review article explains the latest advances in carbon nanotubes and their applications in electrochemical, electrical and optical properties of nanocomposites.

BACKGROUND: Brachypodium distachyon (Brachypodium) is rapidly emerging as a powerful model system to facilitate research aimed at improving grass crops for grain, forage and energy production. To characterize the natural diversity of Brachypodium and provide a valuable new tool to the growing list of resources available to Brachypodium researchers, we created and characterized a large, diverse collection of inbred lines. RESULTS: We developed 84 inbred lines from eight locations in Turkey. To enable genotypic characterization of this collection, we created 398 SSR markers from BAC end and EST sequences. An analysis of 187 diploid lines from 56 locations with 43 SSR markers showed considerable genotypic diversity. There was some correlation between SSR genotypes and broad geographic regions, but there was also a high level of genotypic diversity at individual locations. Phenotypic analysis of this new germplasm resource revealed considerable variation in flowering time, seed size, and plant architecture. The inbreeding nature of Brachypodium was confirmed by an extremely high level of homozygosity in wild plants and a lack of cross-pollination under laboratory conditions. CONCLUSION: Taken together, the inbreeding nature and genotypic diversity observed at individual locations suggest a significant amount of long-distance seed dispersal. The resources developed in this study are freely available to the research community and will facilitate experimental applications based on natural diversity.

Iron and copper have similar physiochemical properties; thus, physiologically relevant interactions seem likely. Indeed, points of intersection between these two essential trace minerals have been recognized for many decades, but mechanistic details have been lacking. Investigations in recent years have revealed that copper may positively influence iron homeostasis, and also that iron may antagonize copper metabolism. For example, when body iron stores are low, copper is apparently redistributed to tissues important for regulating iron balance, including enterocytes of upper small bowel, the liver, and blood. Copper in enterocytes may positively influence iron transport, and hepatic copper may enhance biosynthesis of a circulating ferroxidase, ceruloplasmin, which potentiates iron release from stores. Moreover, many intestinal genes related to iron absorption are transactivated by a hypoxia-inducible transcription factor, hypoxia-inducible factor-2α (HIF2α), during iron deficiency. Interestingly, copper influences the DNA-binding activity of the HIF factors, thus further exemplifying how copper may modulate intestinal iron homeostasis. Copper may also alter the activity of the iron-regulatory hormone hepcidin. Furthermore, copper depletion has been noted in iron-loading disorders, such as hereditary hemochromatosis. Copper depletion may also be caused by high-dose iron supplementation, raising concerns particularly in pregnancy when iron supplementation is widely recommended. This review will cover the basic physiology of intestinal iron and copper absorption as well as the metabolism of these minerals in the liver. Also considered in detail will be current experimental work in this field, with a focus on molecular aspects of intestinal and hepatic iron-copper interplay and how this relates to various disease states. © 2018 American Physiological Society. Compr Physiol 8:1433-1461, 2018.

Scrotal hyperthermia has been known as a cause of male infertility but the exact mechanism leading to impaired spermatogenesis is unknown. This work was aimed to investigate the role of scrotal hyperthermia on cell proliferation and apoptosis in testes. The rats were randomly allotted into one of the four experimental groups: A (control), B (1 day after scrotal hyperthermia), C (14 days after scrotal hyperthermia), and D (35 days after scrotal hyperthermia); each group comprised 7 animals. Scrotal hyperthermia was carried out in a thermostatically controlled water bath at 43°C for 30 min once daily for 6 consecutive days. Control rats were treated in the same way, except the testes were immersed in a water bath maintained at 22°C. Hyperthermia-exposed rats were killed under 50 mg/kg ketamine anaesthesia and tissue samples were obtained for biochemical and histopathological investigations. Hyperthermia treatment significantly decreased the testicular antioxidant system, including decreases in the glutathione level, superoxide dismutase, and glutathione peroxidase activities. Moreover, exposure to hyperthermia resulted in lipid peroxidation increase in testes. Our data indicate a significant reduction in the expression of proliferating cell nuclear antigen and an enhancement in the activity of terminal deoxynucleotidyl transferase dUTP nick end labelling after scrotal hyperthermia. In scrotal hyperthermia, the mitochondrial degeneration, dilatation of smooth endoplasmic reticulum, and enlarged intercellular spaces were observed in both Sertoli and spermatid cells. Scrotal hyperthermia is one of the major factors that impair spermatogenesis in testis. This heat stress is shown to be closely associated with oxidative stress, followed by apoptosis of germ cells.

This volume offers an ontogenetic perspective on research on L3, multilingualism and multiple languages acquisition and a conceptually updated picture of multilingualism studies and third/multiple language acquisition studies. The contributions by prominent scholars of multilingualism present state-of-the-art accounts of the significant aspects in this field. This unique collection of articles adopts a broad-spectrum and synthesized view on the topic. The volume, largely theoretical and classificatory, features main theories, prominent researchers and important research trends. The articles also contain factual and historical material from previous and current decades of research and offer practical information on research resources. For lecturers, students, educators, researchers, and social workers operating in multilingual contexts, The Exploration of Multilingualism is manifestly relevant.

This review article focuses on conducting polymers and their applications. Conducting polymers (CPs) are an exciting new class of electronic materials, which have attracted an increasing interest since their discovery in 1977. They have many advantages, as compared to the non-conducting polymers, which is primarily due to their electronic and optic properties. Also, they have been used in artificial muscles, fabrication of electronic device, solar energy conversion, rechargeable batteries, and sensors. This study comprises two main parts of investigation. The first focuses conducting polymers (polythiophene, polyparaphenylene vinylene, polycarbazole, polyaniline, and polypyrrole). The second regards their applications, such as Supercapacitors, Light emitting diodes (LEDs), Solar cells, Field effect transistor (FET), and Biosensors. Both parts have been concluded and summarized with recent reviewed 233 references. Keywords: Biosensor, Conducting polymer, Field Effect Transistor, Light Emitting Diode, Solar Cell, Supercapacitor