Valparaiso University

Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

<para xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> This paper presents a technology review of voltage-source-converter topologies for industrial medium-voltage drives. In this highly active area, different converter topologies and circuits have found their application in the market. This paper covers the high-power voltage-source inverter and the most used multilevel-inverter topologies, including the neutral-point-clamped, cascaded H-bridge, and flying-capacitor converters. This paper presents the operating principle of each topology and a review of the most relevant modulation methods, focused mainly on those used by industry. In addition, the latest advances and future trends of the technology are discussed. It is concluded that the topology and modulation-method selection are closely related to each particular application, leaving a space on the market for all the different solutions, depending on their unique features and limitations like power or voltage level, dynamic performance, reliability, costs, and other technical specifications. </para>

This paper presents a detailed description of finite control set model predictive control (FCS-MPC) applied to power converters. Several key aspects related to this methodology are, in depth, presented and compared with traditional power converter control techniques, such as linear controllers with pulsewidth-modulation-based methods. The basic concepts, operating principles, control diagrams, and results are used to provide a comparison between the different control strategies. The analysis is performed on a traditional three-phase voltage source inverter, used as a simple and comprehensive reference frame. However, additional topologies and power systems are addressed to highlight differences, potentialities, and challenges of FCS-MPC. Among the conclusions are the feasibility and great potential of FCS-MPC due to present-day signal-processing capabilities, particularly for power systems with a reduced number of switching states and more complex operating principles, such as matrix converters. In addition, the possibility to address different or additional control objectives easily in a single cost function enables a simple, flexible, and improved performance controller for power-conversion systems.

<para xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> Neutral-point-clamped (NPC) inverters are the most widely used topology of multilevel inverters in high-power applications (several megawatts). This paper presents in a very simple way the basic operation and the most used modulation and control techniques developed to date. Special attention is paid to the loss distribution in semiconductors, and an active NPC inverter is presented to overcome this problem. This paper discusses the main fields of application and presents some technological problems such as capacitor balance and losses. </para>

This paper addresses to some of the latest contributions on the application of Finite Control Set Model Predictive Control (FCS-MPC) in Power Electronics. In FCS-MPC , the switching states are directly applied to the power converter, without the need of an additional modulation stage. The paper shows how the use of FCS-MPC provides a simple and efficient computational realization for different control objectives in Power Electronics. Some applications of this technology in drives, active filters, power conditioning, distributed generation and renewable energy are covered. Finally, attention is paid to the discussion of new trends in this technology and to the identification of open questions and future research topics.

We describe a paradigm for computing with interacting quantum dots, quantum-dot cellular automata (QCA). We show how arrays of quantum-dot cells could be used to perform useful computations. A new adiabatic switching paradigm is developed which permits clocked control, eliminates metastability problems, and enables a pipelined architecture.

This article describes the construction of the Conformity to Masculine Norms Inventory (CMNI), and 5 studies that examined its psychometric properties. Factor analysis indicated 11 distinct factors: Winning, Emotional Control, Risk-Taking, Violence, Dominance, Playboy, Self-Reliance, Primacy of Work, Power Over Women, Disdain for Homosexuals, and Pursuit of Status. Results from Studies 2-5 indicated that the CMNI had strong internal consistency estimates and good differential validity comparing men with women and groups of men on health-related questions; all of the CMNI subscales were significantly and positively related to other masculinity-related measures, with several subscales being related significantly and positively to psychological distress, social dominance, aggression, and the desire to be more muscular, and significantly and negatively to attitudes toward psychological help seeking and social desirability; and CMNI scores had high test-retest estimates for a 2-3 week period.

Model-based predictive control (MPC) for power converters and drives is a control technique that has gained attention in the research community. The main reason for this is that ?although MPC presents high computational burden, it can easily handle multivariable case and system constraints and nonlinearities in a very intuitive way. Taking advantage of that, MPC has been successfully used for different applications such as an active front end (AFE), power converters connected to resistor?inductor RL loads, uninterruptible power supplies, and high-performance drives for induction machines, among others. This article provides a review of the application of MPC in the power electronics area.

When control schemes based on finite control set model predictive control are experimentally implemented, a large amount of calculations is required, introducing a considerable time delay in the actuation. This delay can deteriorate the performance of the system if not considered in the design of the controller. In this paper, the problem is described, and the solution to this issue is clearly explained using a three-phase inverter as an example. Experimental results to validate this solution are shown.

This meta-analysis synthesized 226 effect sizes reflecting the relation between self-focused attention and negative affect (depression, anxiety, negative mood). The results demonstrate the multifaceted nature of self-focused attention and elucidate major controversies in the field. Overall, self-focus was associated with negative affect. Several moderators qualified this relationship. Self-focus and negative affect were more strongly related in clinical and female-dominated samples. Rumination yielded stronger effect sizes than nonruminative self-focus. Self-focus on positive self-aspects and following a positive event were related to lower negative affect. Most important, an interaction between foci of self-attention and form of negative affect was found: Private self-focus was more strongly associated with depression and generalized anxiety, whereas public self-focus was more strongly associated with social anxiety.

Identified charged-particle spectra of ${\ensuremath{\pi}}^{\ifmmode\pm\else\textpm\fi{}}$, ${K}^{\ifmmode\pm\else\textpm\fi{}}$, $p$, and $\overline{p}$ at midrapidity ($|y|&lt;0.1$) measured by the $\mathit{dE}/\mathit{dx}$ method in the STAR (solenoidal tracker at the BNL Relativistic Heavy Ion Collider) time projection chamber are reported for $\mathit{pp}$ and $d+\mathrm{Au}$ collisions at $\sqrt{{s}_{\mathit{NN}}}=200$ GeV and for $\mathrm{Au}+\mathrm{Au}$ collisions at 62.4, 130, and 200 GeV. Average transverse momenta, total particle production, particle yield ratios, strangeness, and baryon production rates are investigated as a function of the collision system and centrality. The transverse momentum spectra are found to be flatter for heavy particles than for light particles in all collision systems; the effect is more prominent for more central collisions. The extracted average transverse momentum of each particle species follows a trend determined by the total charged-particle multiplicity density. The Bjorken energy density estimate is at least several GeV/${\mathrm{fm}}^{3}$ for a formation time less than 1 fm/$c$. A significantly larger net-baryon density and a stronger increase of the net-baryon density with centrality are found in $\mathrm{Au}+\mathrm{Au}$ collisions at 62.4 GeV than at the two higher energies. Antibaryon production relative to total particle multiplicity is found to be constant over centrality, but increases with the collision energy. Strangeness production relative to total particle multiplicity is similar at the three measured RHIC energies. Relative strangeness production increases quickly with centrality in peripheral $\mathrm{Au}+\mathrm{Au}$ collisions, to a value about 50% above the $\mathit{pp}$ value, and remains rather constant in more central collisions. Bulk freeze-out properties are extracted from thermal equilibrium model and hydrodynamics-motivated blast-wave model fits to the data. Resonance decays are found to have little effect on the extracted kinetic freeze-out parameters because of the transverse momentum range of our measurements. The extracted chemical freeze-out temperature is constant, independent of collision system or centrality; its value is close to the predicted phase-transition temperature, suggesting that chemical freeze-out happens in the vicinity of hadronization and the chemical freeze-out temperature is universal despite the vastly different initial conditions in the collision systems. The extracted kinetic freeze-out temperature, while similar to the chemical freeze-out temperature in $\mathit{pp}$, $d+\mathrm{Au}$, and peripheral $\mathrm{Au}+\mathrm{Au}$ collisions, drops significantly with centrality in $\mathrm{Au}+\mathrm{Au}$ collisions, whereas the extracted transverse radial flow velocity increases rapidly with centrality. There appears to be a prolonged period of particle elastic scatterings from chemical to kinetic freeze-out in central $\mathrm{Au}+\mathrm{Au}$ collisions. The bulk properties extracted at chemical and kinetic freeze-out are observed to evolve smoothly over the measured energy range, collision systems, and collision centralities.

This paper presents a comprehensive study on the state-of-the-art and emerging wind energy technologies from the electrical engineering perspective. In an attempt to decrease cost of energy, increase the wind energy conversion efficiency, reliability, power density, and comply with the stringent grid codes, the electric generators and power electronic converters have emerged in a rigorous manner. From the market based survey, the most successful generator-converter configurations are addressed along with few promising topologies available in the literature. The back-to-back connected converters, passive generator-side converters, converters for multiphase generators, and converters without intermediate dc-link are investigated for high-power wind energy conversion systems (WECS), and presented in low and medium voltage category. The onshore and offshore wind farm configurations are analyzed with respect to the series/parallel connection of wind turbine ac/dc output terminals, and high voltage ac/dc transmission. The fault-ride through compliance methods used in the induction and synchronous generator based WECS are also discussed. The past, present and future trends in megawatt WECS are reviewed in terms of mechanical and electrical technologies, integration to power systems, and control theory. The important survey results, and technical merits and demerits of various WECS electrical systems are summarized by tables. The list of current and future wind turbines are also provided along with technical details.

INTRODUCTION: Sexual health is an integral part of overall health. Sexual dysfunction can have a major impact on quality of life and psychosocial and emotional well-being. AIM: To provide evidence-based, expert-opinion consensus guidelines for clinical management of sexual dysfunction in men. METHODS: An international consultation collaborating with major urologic and sexual medicine societies convened in Paris, July 2009. More than 190 multidisciplinary experts from 33 countries were assembled into 25 consultation committees. Committee members established scope and objectives for each chapter. Following an exhaustive review of available data and publications, committees developed evidence-based guidelines in each area. Main Outcome Measures. New algorithms and guidelines for assessment and treatment of sexual dysfunctions were developed based on work of previous consultations and evidence from scientific literature published from 2003 to 2009. The Oxford system of evidence-based review was systematically applied. Expert opinion was based on systematic grading of medical literature, and cultural and ethical considerations. RESULTS: Algorithms, recommendations, and guidelines for sexual dysfunction in men are presented. These guidelines were developed in an evidence-based, patient-centered, multidisciplinary manner. It was felt that all sexual dysfunctions should be evaluated and managed following a uniform strategy, thus the International Consultation of Sexual Medicine (ICSM-5) developed a stepwise diagnostic and treatment algorithm for sexual dysfunction. The main goal of ICSM-5 is to unmask the underlying etiology and/or indicate appropriate treatment options according to men's and women's individual needs (patient-centered medicine) using the best available data from population-based research (evidence-based medicine). Specific evaluation, treatment guidelines, and algorithms were developed for every sexual dysfunction in men, including erectile dysfunction; disorders of libido, orgasm, and ejaculation; Peyronie's disease; and priapism. CONCLUSIONS: Sexual dysfunction in men represents a group of common medical conditions that need to be managed from a multidisciplinary perspective.

The design of low-cost yet high-efficiency electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) over a wide pH range is highly challenging. We now report a hierarchical co-assembly of interacting MoS2 and Co9S8 nanosheets attached on Ni3S2 nanorod arrays which are supported on nickel foam (NF). This tiered structure endows high performance toward HER and OER over a very broad pH range. By adjusting the molar ratio of the Co:Mo precursors, we have created CoMoNiS-NF-xy composites (x:y means Co:Mo molar ratios ranging from 5:1 to 1:3) with controllable morphology and composition. The three-dimensional composites have an abundance of active sites capable of universal pH catalytic HER and OER activity. The CoMoNiS-NF-31 demonstrates the best electrocatalytic activity, giving ultralow overpotentials (113, 103, and 117 mV for HER and 166, 228, and 405 mV for OER) to achieve a current density of 10 mA cm–2 in alkaline, acidic, and neutral electrolytes, respectively. It also shows a remarkable balance between electrocatalytic activity and stability. Based on the distinguished catalytic performance of CoMoNiS-NF-31 toward HER and OER, we demonstrate a two-electrode electrolyzer performing water electrolysis over a wide pH range, with low cell voltages of 1.54, 1.45, and 1.80 V at 10 mA cm–2 in alkaline, acidic, and neutral media, respectively. First-principles calculations suggest that the high OER activity arises from electron transfer from Co9S8 to MoS2 at the interface, which alters the binding energies of adsorbed species and decreases overpotentials. Our results demonstrate that hierarchical metal sulfides can serve as highly efficient all-pH (pH = 0–14) electrocatalysts for overall water splitting.

This paper presents a single-phase cascaded H-bridge converter for a grid-connected photovoltaic (PV) application. The multilevel topology consists of several H-bridge cells connected in series, each one connected to a string of PV modules. The adopted control scheme permits the independent control of each dc-link voltage, enabling, in this way, the tracking of the maximum power point for each string of PV panels. Additionally, low-ripple sinusoidal-current waveforms are generated with almost unity power factor. The topology offers other advantages such as the operation at lower switching frequency or lower current ripple compared to standard two-level topologies. Simulation and experimental results are presented for different operating conditions.

We report high statistics measurements of inclusive charged hadron production in $\mathrm{A}\mathrm{u}+\mathrm{A}\mathrm{u}$ and $p+p$ collisions at $\sqrt{{s}_{\mathrm{N}\mathrm{N}}}=200\text{ }\text{ }\mathrm{G}\mathrm{e}\mathrm{V}$. A large, approximately constant hadron suppression is observed in central $\mathrm{A}\mathrm{u}+\mathrm{A}\mathrm{u}$ collisions for $5\mathrm{&lt;}{p}_{T}\mathrm{&lt;}12\text{ }\mathrm{G}\mathrm{e}\mathrm{V}/c$. The collision energy dependence of the yields and the centrality and ${p}_{T}$ dependence of the suppression provide stringent constraints on theoretical models of suppression. Models incorporating initial-state gluon saturation or partonic energy loss in dense matter are largely consistent with observations. We observe no evidence of ${p}_{T}$-dependent suppression, which may be expected from models incorporating jet attenuation in cold nuclear matter or scattering of fragmentation hadrons.

We report measurements of single-particle inclusive spectra and two-particle azimuthal distributions of charged hadrons at high transverse momentum (high ${p}_{T}$) in minimum bias and central $d+\mathrm{A}\mathrm{u}$ collisions at $\sqrt{{s}_{NN}}=200\text{ }\text{ }\mathrm{G}\mathrm{e}\mathrm{V}$. The inclusive yield is enhanced in $d+\mathrm{A}\mathrm{u}$ collisions relative to binary-scaled $p+p$ collisions, while the two-particle azimuthal distributions are very similar to those observed in $p+p$ collisions. These results demonstrate that the strong suppression of the inclusive yield and back-to-back correlations at high ${p}_{T}$ previously observed in central $\mathrm{A}\mathrm{u}+\mathrm{A}\mathrm{u}$ collisions are due to final-state interactions with the dense medium generated in such collisions.

The results from the STAR Collaboration on directed flow (${v}_{1}$), elliptic flow (${v}_{2}$), and the fourth harmonic (${v}_{4}$) in the anisotropic azimuthal distribution of particles from Au+Au collisions at $\sqrt{{s}_{\mathit{NN}}}=200\phantom{\rule{0.3em}{0ex}}\mathrm{GeV}$ are summarized and compared with results from other experiments and theoretical models. Results for identified particles are presented and fit with a blast-wave model. Different anisotropic flow analysis methods are compared and nonflow effects are extracted from the data. For ${v}_{2}$, scaling with the number of constituent quarks and parton coalescence are discussed. For ${v}_{4}$, scaling with ${v}_{2}^{2}$ and quark coalescence are discussed.

The beam-energy scan at RHIC aims to discover whether a critical point exists in the phase diagram of QCD. This paper reports on the most comprehensive measurement of single-particle spectra for a multitude of hadrons from the first run, taken with the STAR experiment. From these the authors infer the kinetic and chemical freeze-out temperatures and the baryon chemical potential as functions of beam energy and centrality. The results provide an opportunity for the beam-energy scan program at RHIC to enlarge the ($T,\ensuremath{\mu}\phantom{\rule{0}{0ex}}B$) region of the phase diagram to search for the QCD critical point.

This paper presents a review of the most popular control and modulation strategies studied for matrix converters (MCs) in the last decade. The purpose of most of these methods is to generate sinusoidal current on the input and output sides. These methods are compared considering theoretical complexity and performance. This paper concludes that the control strategy has a significant impact on the resonance of the MC input filter.