Research indexJournal article
電鍍銅銦硒薄膜之材料特性、成長行為控制及電化學結晶行為-應用於銅銦硒太陽能電池
黃憲中
臺灣大學材料科學與工程學研究所學位論文1 Jan 2013
NobleIDark:/48914/w1/20260515/F462F0EADOI10.6342/ntu.2013.00031
電鍍銅銦硒薄膜之材料特性、成長行為控制及電化學結晶行為-應用於銅銦硒太陽能電池
黃憲中 · 臺灣大學材料科學與工程學研究所學位論文 · 2013 · Subscription
NobleIDark:/48914/w1/20260515/F462F0EADOI10.6342/ntu.2013.00031
The full text is at the publisher
You can read the abstract here, or open it at the publisher.
Abstract
The compact, smooth, with an expectative composition CuInSe2 electrodeposits used in CIS solar cell were successfully prepared by single-bath CIS solution. Reduction potential, KCl concentration (0 ~ 500 mmol L-1), sputtering Mo coated glass, and pretreatment of Mo substrate were found to significantly influence the properties of the deposited CIS and selenized CIS. In addition, the electrocrystallization of CIS at different reduction potentials (–0.65 ~ –0.80 VSCE) and corresponding the composition were investigated. This study also attempted to fabricate a CIS solar cell based on the single-bath electrodeposition process for CIS adsorption layer. The improvements of the cell efficiency and reproducibility of electrodeposited CIS layer due to the modified processes were explored as well. The experimental results indicated that the ratio of Cu to In between 0.8 ~ 1.0 and the ratio of Se to CIS slightly above 0.5 can be obtained potentiostatically at –0.5 ~ –0.8 VSCE in the selected CIS solution composed of CuCl2, InCl3, H2SeO3 and KCl. CIS composition plays an important role in the electric properties of PN junction for the solar cell application. However, smooth surface with compact structure and uniform composition were confirmed to be the most important factors that led to the high quality adsorption later for the fabrication of CIS solar cell, especially for the electrodeposition process of CIS. Furthermore, these kinds of materials characteristics of electrodeposited CIS were preferably obtained at optimal deposition potential, appropriate KCl concentration (0 ~ 300 mmol L-1), “passivative” Mo substrate and multi-step potential deposition. In general, KCl has been widely used as a conductivity salt owing to its great ionic mobility and does not participate in the cathodic reaction. However, in CIS deposition, KCl was found to enhance the reduction current of individual electroactive species (ex: predominated ion of added salts, likes CuCl2, InCl3, H2SeO3 at pH1.55) in varying degrees by different mechanism. Thus, the electrodeposited CIS results in the composition deviation from stoichiometry, appearance of secondary Cu2-xSe phases in local areas causing degradation of the device performance, and compact structure changed to granular or dendritic growth of CIS. Accordingly, the quality of CIS deposits were deteriorated by increasing KCl, though the stability of CIS solution was promoted as the KCl concentration was above 300 mmol L-1 due to the competitive complexing; that is, complexes are formed between indium ions and chloride ion (InCl3-nn ) to avoid the formation of indium selenide hydroxide suspensions. Furthermore, in common metal electrodeposition, the deposits are hardly influenced by different substrates. However, the sputtering Mo coatings strongly influenced the composition and morphology of the CIS deposits, especially, the deposits obtained from the higher KCl concentration for the purpose of stable electrolyte and without loosing the smooth, compact CIS sturcuture. Experimental results indicated that the sputter parameters influence the crystallinity, and the crystallinity of Mo coatings correlated very well of the open circuit potential in the electrolyte for CIS electrodeposition. Consequently, the Cu/In ratio of CIS deposits plated at a constant potential of –0.7 VSCE varied with the distinct Mo coatings of different overpotentals. Various degree of hydrogen evolution reaction (HER) can also be retarded by the different amoumt of oxygen content in the Mo coatings. Higher content of oxygen of 29 at % can resulted in a compact CIS deposit. However the Mo coatings deficient in crystallinities or with higher oxygens content show higher conductivity were generally unfavorable to the electron transfer. Ex: the condictiviy of distinct Mo substrate can vary within 13 ~ 580 μΩ cm. Therefore, the surface modifications of high conductivity Mo substrates and the newly multi-step deposition were investigated to achieve the compact CIS deposits without sacrificing the electric conductivity. These processes included: MoOx/Mo bilayer manufactured in vacuum process, oxidation in air atmosphere at 300 oC, Mo passivated in HCl solution, potentiostatic deposition with multi-step. The experimental results have also been established. However, the study of the electrocrystallization process in CIS electrodeposition is still absent. Here, we employed a new and straightforward approach to study the early electrocrystallization using carbon-coated nickel TEM grids as the substrate for CuInSe2 electroplating and directly observed it in the TEM. The potentiostatic current transients of the peak associated with CuInSe2 were also evaluated by numerical analysis and showed that the initial stage of deposition included a 2D instantaneous nucleation overlapped with a 3D instantaneous nucleation. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and EDS reveals that nanocrystalline cubic structure Cu2-xSe is deposited within the first 4 ms. No elementary Cu, In, Se can be detected. After 48 ms, as Cu2+ and H2SeO3 around Cu2-xSe nuclei become depleted, In+3 is then reduced and the tetragonal CuInSe2 nanocrystals start to deposit around the Cu2-xSe nuclei surface to form core-shell structures.