NobleBlocks

Research indexJournal article

Экспериментальное исследование зависимости скорости коррозии металла от плотности переменного синусоидального тока промышленной частоты

Николаевич, Викторович

SCIENCE & TECHNOLOGIES OIL AND OIL PRODUCTS PIPELINE TRANSPORTATION5 Dec 2024

NobleIDark:/48914/w1/20260515/ED8649FFDOI10.28999/2541-9595-2024-14-3-272-281

Paywalled

The full text is at the publisher

You can read the abstract here, or open it at the publisher.

Read at the publisher

Abstract

На поверхности подземных магистральных трубопроводов, находящихся в зоне влияния высоковольтных линий электропередачи номинальным напряжением 110 кВ и более, возникает наведенная электродвижущая сила (ЭДС). Наведенная ЭДС оказывает влияние на протекание коррозионного процесса и работу средств противокоррозионной защиты. На поверхности трубопроводов в современных заводских изоляционных покрытиях ЭДС может сохраняться длительное время. С целью изучения механизма коррозии под действием переменного тока разработан стенд, позволяющий исследовать одновременное воздействие переменного тока промышленной частоты 50 Гц и постоянного тока катодной защиты на металлические образцы. Описана конструкция стенда и методика проведения эксперимента. Проведено исследование зависимости скорости коррозии от величины плотности переменного тока, в результате которого получены кривые зависимости для различных значений поляризационных потенциалов. Установлено, что полученные кривые описываются кусочно-линейными зависимостями и имеют экстремум, соответствующий минимальной скорости коррозии. Также установлено, что переменный ток в зависимости от его плотности может оказывать как положительное, так и отрицательное воздействие. Результаты исследования свидетельствуют о нецелесообразности полного устранения переменной составляющей тока с защищаемых объектов. Возможно использование переменного тока в дополнение к катодной защите. An induced EMF occurs on the surface of underground main pipelines located in the zone of influence of highvoltage power lines 110 kV and higher. The induced EMF influences the course of the corrosion process and the operation of anti-corrosion protection products. On the surface of pipelines in modern factory insulating coatings, EMF can persist for a long time. In order to study the mechanism of corrosion under the influence of alternating current, a stand has been developed that makes it possible to study the simultaneous effect of alternating current of industrial frequency 50 Hz and direct current of cathodic protection on metal samples. The design of the stand and the experimental procedure are described. A study was carried out of the dependence of the corrosion rate on the alternating current density, as a result of which dependence curves were obtained for various values of polarization potentials. It has been established that the resulting curves are described by piecewise linear dependencies and have an extremum corresponding to the minimum corrosion rate. It has also been established that alternating current, depending on its density, can have both positive and negative effects. The results of the study indicate that it is inappropriate to completely eliminate the alternating current component from the protected objects. It is possible to use alternating current in addition to cathodic protection.

Discussion

Topics

More

Suggest a correction or report