Research indexJournal article
Аналіз енергетичної ефективності стабілізатора озброєння залежно від параметрів електроприводу
Tkachuk
Journal of Electrical and power engineering30 Apr 2026Open access
NobleIDark:/48914/w1/20261105/A5E68691DOI10.31474/2074-2630-2026-1-28-35
Аналіз енергетичної ефективності стабілізатора озброєння залежно від параметрів електроприводу
Tkachuk · Journal of Electrical and power engineering · 2026
NobleIDark:/48914/w1/20261105/A5E68691DOI10.31474/2074-2630-2026-1-28-35
Free to read at the publisher
You can read the abstract here, or the full text at the publisher.
Abstract
The paper analyzes how the key parameters of an electromechanical drive affect the energy effi- ciency of a weapon stabilizer used in light armored vehicles. The need for this study is driven by practical requirements: the stabilizer must maintain accurate line-of-sight stabilization while operat- ing with minimal energy consumption, which is critical under limited power resources, high vehicle mobility, and continuously changing conditions during movement and combat missions. To evalu- ate these effects, a mathematical model of the “electric drive–gear reducer–inertial link” system was developed, taking into account typical external disturbances such as hull vibrations, recoil impulses, and platform oscillations when traveling over rough terrain. Further analysis was carried out using computer simulation in MATLAB/Simulink, which made it possible to trace how variations in drive parameters influence stabilization error and the level of power consumption in typical operating modes. The study compares the performance of three control approaches: a classical PID controller, an adaptive controller, and a controller based on neural-network methods. Numerical experiments for target acquisition, tracking of a moving target, and vibration compensation scenarios showed that PID control provides an acceptable level of accuracy but is associated with the highest energy costs. Adaptive control enables a noticeable reduction in energy consumption (approximately 15–20%) and typically improves stabilization accuracy. The most balanced results were obtained with the intelligent controller, which ensured the smallest error and the lowest energy consumption among the considered options.