NobleBlocks

Research indexJournal article

ТАБИҒИ ЖОЛМЕН ҚАТАЙҒАН КӨБІК БЕТОННЫҢ ФИЗИКАЛЫҚ-ТЕХНИКАЛЫҚ ҚАСИЕТТЕРІН АРТТЫРУ

Бакушев, Акатов

Building materials and construction engineering30 Sep 2026Open access

NobleIDark:/48914/w1/20261105/7826987DDOI10.52578/3135-0690-2026-3-24-34

Abstract

This article examines the causes of low strength in naturally cured foam concrete and explores effective ways to increase the activity of Portland cement. The main factors contributing to reduced strength include the discrepancy between the actual activity of the cement and its stated characteristics, as well as the presence of clay and silt impurities in the sand. Given the shortage of high-quality cement and the lack of interest from manufacturers in improving its properties, the issue of increasing the efficiency of binders is particularly pressing. Existing methods for activating Portland cement are discussed, the most common of which is increasing particle size through additional grinding. However, traditional methods based on the use of ball mills are characterized by high energy consumption and low efficiency, as a significant portion of the energy is wasted. Furthermore, such methods do not allow for controlling the particle size distribution of the cement: fine particles are over-ground and coarse particles are under-ground, leading to deterioration of the material's properties. The paper substantiates the advantages of the disintegrator (impact) grinding method, which breaks particles through shear deformations, requiring less energy. This method ensures a more precise and optimal particle size distribution of cement powder, increasing the proportion of the most effective "medium" fraction (10–40 mkm) and reducing the amount of both over-ground and large inactive grains. This promotes more uniform and efficient hydration processes and increases the strength of the cement stone at various stages of hardening. Experimental studies have shown that disintegrator treatment of cement increases its activity by one or two stages, as well as shortens the initial and final setting times. A positive effect of particle shape has also been noted: impact grinding produces a rough, angular shape, which enhances their interaction with water and increases their physicochemical activity. As a result, it was established that the complex use of disintegrator activation of cement and sand together with chemical additives makes it possible to increase the cement grade to 550–700, shorten the duration of the technological cycle, reduce the consumption of binder and increase the efficiency of the production of foam concrete products.

Discussion

More

Suggest a correction or report