NobleBlocks

Research indexJournal article

УПРАВЛЕНИЕ ХАРАКТЕРИСТИКАМИ ПРОДУКТОВ АЛЮМОТЕРМИЧЕСКИХ РЕАКЦИЙ ПРИ МЕТАЛЛУРГИЧЕСКОМ ПОЛУЧЕНИИ ЖЕЛЕЗОУГЛЕРОДИСТЫХ СПЛАВОВ

Комаров, Абашкин, Ловизин and 1 other

Metallurg28 Dec 2025

NobleIDark:/48914/w1/20261105/16353715DOI10.52351/00260827_2025_12_100

Paywalled

The full text is at the publisher

You can read the abstract here, or open it at the publisher.

Read at the publisher

Abstract

Современное развитие промышленности опирается на новые и совершенствуемые ресурсосберегающие и энергоэкономные технологические процессы, позволяющие получать продукцию с требуемым уровнем характеристик при существенном снижении затрат на ее производство. В частности, разработка и внедрение технологий, позволяющих снизить материалоемкость изготовления изделий, а также использовать в качестве исходных доступные недорогие вторичные материалы, позволяют принести существенный экономический эффект товаропроизводителям. В металлургической отрасли, являющейся одним из лидеров по потреблению материальных и энергетических ресурсов, вопрос их экономии стоит наиболее остро. Одним из способов решить часть существующих проблем металлургии является алюмотермия. Технологии, основанные на данном методе, позволяют использовать металлоотходы металлургических и машиностроительных предприятий в виде окалины и стружки алюминиевых сплавов, а также иных металлических материалов, что приводит к удешевлению конечной продукции. Наиболее важно при алюмотермии соблюдать соотношение образующихся фаз металла, шлака и газа, обеспечивая повышенный выход железосодержащего продукта. С этой целью разрабатываются различные способы управления экзотермическим процессом, например изменяется начальная температура термитной шихты, вводятся в состав смесей различные наполнители и т.д. В представленном исследовании рассматривается влияние комбинаций фракционных составов исходных материалов, используемых для формирования шихтовых композиций, на соотношение образующихся продуктов реакции, химический состав и свойства получаемых сплавов. Установлено, что применяемые комбинации фракционных составов материалов обеспечивают выход металлической, шлаковой и газовой фаз в диапазонах 24,75–52,47, 42,76–64,22 и 1,16–11,03 масс. %, соответственно. В зависимости от условий протекания экзотермической реакции и доли выхода металла полученные образцы железоуглеродистых сплавов имеют концентрацию основных элементов в следующих диапазонах, масс.%: C 0,067–2,612; Mn 0,029–1,395; Si 0,022–1,181; Al 0,22–11,875; Cu 1,227–2,138. Твердость экспериментальных материалов соотносится с их структурой и находится в диапазоне 151–622 HBW. Результаты исследований позволили установить возможность управления параметрами алюмотермических процессов путем комбинирования фракционных составов и исходных компонентов термитных смесей, что имеет важное научно-практическое значение. Modern industrial development trends are based on new and improved resource-saving and energy-efficient technological processes that make it possible to obtain products with the required level of characteristics while significantly reducing production costs. In particular, the development and implementation of technologies that reduce the material consumption of manufacturing products, as well as using affordable, inexpensive secondary materials as raw materials, can bring significant economic benefits to commodity producers. In the metallurgical industry, which is one of the leaders in the consumption of material and energy resources, the issue of saving them is most acute. Alumothermy is one of the ways to solve some of the existing problems of metallurgy. Technologies based on this method make it possible to use metal waste from metallurgical and machine-building enterprises in the form of scale and shavings of aluminum alloys, as well as other metal materials, which leads to cheaper final products. It is most important in alumothermy to observe the ratio of the metal, slag and gas phases formed, ensuring an increased yield of the iron-containing product. In order to fulfill this condition, various methods of controlling the exothermic process are being developed, for example, the initial temperature of the thermite charge is changed, various fillers are introduced into the mixtures, etc. The presented study examines the effect of combinations of fractional compositions of the starting materials used for the formation of charge compositions on the ratios of the reaction products formed, the chemical composition and properties of the resulting alloys. Based on the conducted studies, it was found that the combinations of fractional compositions of materials used provide the output of metal, slag and gas phases in the ranges of 24.75-52.47 wt.%, 42.76-64.22 wt.% and 1.16-11.03 wt.%, respectively. Depending on the conditions of the exothermic reaction and the proportion of metal yield, the obtained samples of iron-carbon alloys have concentrations of the main elements in the following ranges, wt.%: C 0.067-2.612; Mn 0.029-1.395; Si 0.022-1.181; Al 0.22-11.875. The hardness of the experimental materials correlates with their structure and is in the range of 150-300 HBW. The research results made it possible to establish the possibility of controlling the parameters of alumothermal processes by combining the fractional compositions of the initial components of thermite mixtures, which is of great scientific and practical importance for production.

Discussion

Citations

More

Suggest a correction or report