École Nationale Supérieure de Chimie de Montpellier

Copper-catalyzed Ullmann condensations are key reactions for the formation of carbon-heteroatom and carbon-carbon bonds in organic synthesis. These reactions can lead to structural moieties that are prevalent in building blocks of active molecules in the life sciences and in many material precursors. An increasing number of publications have appeared concerning Ullmann-type intermolecular reactions for the coupling of aryl and vinyl halides with N, O, and C nucleophiles, and this Minireview highlights recent and major developments in this topic since 2004.

Plasma-liquid interactions represent a growing interdisciplinary area of research involving plasma science, fluid dynamics, heat and mass transfer, photolysis, multiphase chemistry and aerosol science. This review provides an assessment of the state-of-the-art of this multidisciplinary area and identifies the key research challenges. The developments in diagnostics, modeling and further extensions of cross section and reaction rate databases that are necessary to address these challenges are discussed. The review focusses on non-equilibrium plasmas.

Titanium is a very attractive candidate for MOFs due to its low toxicity, redox activity, and photocatalytic properties. We present here MIL-125, the first example of a highly porous and crystalline titanium(IV) dicarboxylate (MIL stands for Materials of Institut Lavoisier) with a high thermal stability and photochemical properties. Its structure is built up from a pseudo cubic arrangement of octameric wheels, built up from edge- or corner-sharing titanium octahedra, and terephthalate dianions leading to a three-dimensional periodic array of two types of hybrid cages with accessible pore diameters of 6.13 and 12.55 A. X-ray thermodiffractometry and thermal analysis show that MIL-125 is stable up to 360 degrees C under air atmosphere while nitrogen sorption analysis indicates a surface area (BET) of 1550 m(2) x g(-1). Moreover, under nitrogen and alcohol adsorption, MIL-125 exhibits a photochromic behavior associated with the formation of stable mixed valence titanium-oxo compounds. The titanium oxo cluster are back oxidized in the presence of oxygen. This photochemical phenomenon is analyzed through the combined use of Electron Spin Resonance (ESR) and UV-visible absorption spectroscopies. The photogenerated electrons are trapped as Ti(III) centers, while a concomitant oxidation of the adsorbed alcohol molecules occurs. This new microporous hybrid is a very promising candidate for applications in smart photonic devices, sensors, and catalysis.

International audience

The current interest in ionic liquids (ILs) is motivated by some unique properties, such as negligible vapour pressure, thermal stability and non-flammability, combined with high ionic conductivity and wide electrochemical stability window. However, for material applications, there is a challenging need for immobilizing ILs in solid devices, while keeping their specific properties. In this critical review, ionogels are presented as a new class of hybrid materials, in which the properties of the IL are hybridized with those of another component, which may be organic (low molecular weight gelator, (bio)polymer), inorganic (e.g. carbon nanotubes, silica etc.) or hybrid organic-inorganic (e.g. polymer and inorganic fillers). Actually, ILs act as structuring media during the formation of inorganic ionogels, their intrinsic organization and physicochemical properties influencing the building of the solid host network. Conversely, some effects of confinement can modify some properties of the guest IL, even though liquid-like dynamics and ion mobility are preserved. Ionogels, which keep the main properties of ILs except outflow, while allowing easy shaping, considerably enlarge the array of applications of ILs. Thus, they form a promising family of solid electrolyte membranes, which gives access to all-solid devices, a topical industrial challenge in domains such as lithium batteries, fuel cells and dye-sensitized solar cells. Replacing conventional media, organic solvents in lithium batteries or water in proton-exchange-membrane fuel cells (PEMFC), by low-vapour-pressure and non flammable ILs presents major advantages such as improved safety and a higher operating temperature range. Implementation of ILs in separation techniques, where they benefit from huge advantages as well, relies again on the development of supported IL membranes such as ionogels. Moreover, functionalization of ionogels can be achieved both by incorporation of organic functions in the solid matrix, and by encapsulation of molecular species (from metal complexes to enzymes) in the immobilized IL phase, which opens new routes for designing advanced materials, especially (bio)catalytic membranes, sensors and drug release systems (194 references).

Carbon-based structures are the most versatile materials used in the modern field of renewable energy (i.e., in both generation and storage) and environmental science (e.g., purification/remediation). However, there is a need and indeed a desire to develop increasingly more sustainable variants of classical carbon materials (e.g., activated carbons, carbon nanotubes, carbon aerogels, etc.), particularly when the whole life cycle is considered (i.e., from precursor "cradle" to "green" manufacturing and the product end-of-life "grave"). In this regard, and perhaps mimicking in some respects the natural carbon cycles/production, utilization of natural, abundant and more renewable precursors, coupled with simpler, lower energy synthetic processes which can contribute in part to the reduction in greenhouse gas emissions or the use of toxic elements, can be considered as crucial parameters in the development of sustainable materials manufacturing. Therefore, the synthesis and application of sustainable carbon materials are receiving increasing levels of interest, particularly as application benefits in the context of future energy/chemical industry are becoming recognized. This review will introduce to the reader the most recent and important progress regarding the production of sustainable carbon materials, whilst also highlighting their application in important environmental and energy related fields.

International audience

The present review offers an overview of nonclassical (e.g., with no pre- or in situ activation of a carboxylic acid partner) approaches for the construction of amide bonds. The review aims to comprehensively discuss relevant work, which was mainly done in the field in the last 20 years. Organization of the data follows a subdivision according to substrate classes: catalytic direct formation of amides from carboxylic and amines ( section 2 ); the use of carboxylic acid surrogates ( section 3 ); and the use of amine surrogates ( section 4 ). The ligation strategies (NCL, Staudinger, KAHA, KATs, etc.) that could involve both carboxylic acid and amine surrogates are treated separately in section 5 .

The use of vanillin as a building block for the chemical industry is discussed in this article. Vanillin is currently one of the only molecular phenolic compounds manufactured on an industrial scale from biomass. It has thus the potential to become a key-intermediate for the synthesis of bio-based polymers, for which aromatic monomers are needed to reach good thermo-mechanical properties. After a first part dedicated to the current sourcing of vanillin, this article focuses on the alkaline oxidation lignin-to-vanillin process, reporting advantages and limits, discusses the various postdepolymerization methods for product isolation and finally examines the outlook for the wider use of vanillin as a key building block for the chemical industry.

A comprehensive and standardized system to report lipid structures analyzed by MS is essential for the communication and storage of lipidomics data. Herein, an update on both the LIPID MAPS classification system and shorthand notation of lipid structures is presented for lipid categories Fatty Acyls (FA), Glycerolipids (GL), Glycerophospholipids (GP), Sphingolipids (SP), and Sterols (ST). With its major changes, i.e., annotation of ring double bond equivalents and number of oxygens, the updated shorthand notation facilitates reporting of newly delineated oxygenated lipid species as well. For standardized reporting in lipidomics, the hierarchical architecture of shorthand notation reflects the diverse structural resolution powers provided by mass spectrometric assays. Moreover, shorthand notation is expanded beyond mammalian phyla to lipids from plant and yeast phyla. Finally, annotation of atoms is included for the use of stable isotope-labeled compounds in metabolic labeling experiments or as internal standards. This update on lipid classification, nomenclature, and shorthand annotation for lipid mass spectra is considered a standard for lipid data presentation.

International audience

Nitrogen-doped carbon materials featuring atomically dispersed metal cations (M–N–C) are an emerging family of materials with potential applications for electrocatalysis. The electrocatalytic activity of M–N–C materials toward four-electron oxygen reduction reaction (ORR) to H2O is a mainstream line of research for replacing platinum-group-metal-based catalysts at the cathode of fuel cells. However, fundamental and practical aspects of their electrocatalytic activity toward two-electron ORR to H2O2, a future green “dream” process for chemical industry, remain poorly understood. Here we combined computational and experimental efforts to uncover the trends in electrochemical H2O2 production over a series of M–N–C materials (M = Mn, Fe, Co, Ni, and Cu) exclusively comprising atomically dispersed M–Nx sites from molecular first-principles to bench-scale electrolyzers operating at industrial current density. We investigated the effect of the nature of a 3d metal within a series of M–N–C catalysts on the electrocatalytic activity/selectivity for ORR (H2O2 and H2O products) and H2O2 reduction reaction (H2O2RR). Co–N–C catalyst was uncovered with outstanding H2O2 productivity considering its high ORR activity, highest H2O2 selectivity, and lowest H2O2RR activity. The activity–selectivity trend over M–N–C materials was further analyzed by density functional theory, providing molecular-scale understandings of experimental volcano trends for four- and two-electron ORR. The predicted binding energy of HO* intermediate over Co–N–C catalyst is located near the top of the volcano accounting for favorable two-electron ORR. The industrial H2O2 productivity over Co–N–C catalyst was demonstrated in a microflow cell, exhibiting an unprecedented production rate of more than 4 mol peroxide gcatalyst–1 h–1 at a current density of 50 mA cm–2.

International audience

Guest editors Guillaume Maurin, Christian Serre, Andrew Cooper and Gérard Férey introduce the Metal–Organic Frameworks and Porous Polymers – Current and Future Challenges issue of <italic>Chemical Society Reviews</italic>.

Amines are key intermediates in the chemical industry due to their nucleophilic characteristic which confers a high reactivity to them. Thus, they are key monomers for the synthesis of polyamides, polyureas, polyepoxydes, which are all of growing interest in automotive, aerospace, building, or health applications. Despite a growing interest for biobased monomers and polymers, and particularly polyamides, it should be noticed that very few natural amines are available. Actually, there is only chitosan and poly(lysine). In this review we present both fundamental and applied research on the synthesis of biobased primary and secondary amines with current available biobased resources. Their use is described as a building block for material chemistry. Hence, we first recall some background on the synthesis of amines, including the reactivity of amines. Second we focus on the synthesis of biobased amines from all sorts of biomass, from carbohydrate, terpenes, or oleochemical sources. Third, because they need optimization and technological developments, we discuss some examples of their use for the creation of biobased polymers. We conclude with the future of the synthesis of biobased amines and their use in different applications.

Carbonic anhydrase IX (CAIX) is a hypoxia and HIF-1-inducible protein that regulates intra- and extracellular pH under hypoxic conditions and promotes tumor cell survival and invasion in hypoxic microenvironments. Interrogation of 3,630 human breast cancers provided definitive evidence of CAIX as an independent poor prognostic biomarker for distant metastases and survival. shRNA-mediated depletion of CAIX expression in 4T1 mouse metastatic breast cancer cells capable of inducing CAIX in hypoxia resulted in regression of orthotopic mammary tumors and inhibition of spontaneous lung metastasis formation. Stable depletion of CAIX in MDA-MB-231 human breast cancer xenografts also resulted in attenuation of primary tumor growth. CAIX depletion in the 4T1 cells led to caspase-independent cell death and reversal of extracellular acidosis under hypoxic conditions in vitro. Treatment of mice harboring CAIX-positive 4T1 mammary tumors with novel CAIX-specific small molecule inhibitors that mimicked the effects of CAIX depletion in vitro resulted in significant inhibition of tumor growth and metastasis formation in both spontaneous and experimental models of metastasis, without inhibitory effects on CAIX-negative tumors. Similar inhibitory effects on primary tumor growth were observed in mice harboring orthotopic tumors comprised of lung metatstatic MDA-MB-231 LM2-4(Luc+) cells. Our findings show that CAIX is vital for growth and metastasis of hypoxic breast tumors and is a specific, targetable biomarker for breast cancer metastasis.

Hybrid porous solids, with their tunable structures, their multifunctional properties and their numerous applications, are currently topical, particularly in the domain of adsorption and storage of greenhouse gases. Most of the data reported so far concern the performances of these solids in this domain, particularly in terms of adsorbed amounts of gas but do not explain at the atomic level why and how adsorption and storage occur. From a combination of structural, spectroscopic, thermodynamic experiments and of molecular simulations, this tutorial review proposes answers to these open questions with a special emphasis on CO2 and CH4 storage by some rigid and flexible hybrid porous materials.

Low-dimensional materials have been examined as electrocatalysts for the hydrogen evolution reaction (HER). Among them, two-dimensional transition metal dichalcogenides (2D-TMDs) such as MoS2 have been identified as potential candidates. However, the performance of TMDs toward HER in both acidic and basic media remains inferior to that of noble metals such as Pt and its alloys. This calls for investigating the influence of controlled defect engineering of 2D TMDs on their performance toward hydrogen production. Here, we explored the HER activity from defective multilayered MoS2 over a large range of surface S vacancy concentrations up to 90%. Amorphous MoS2 and 2H MoS2 with ultrarich S vacancies demonstrated the highest HER performance in acid and basic electrolytes, respectively. We also report that the HER performance from multilayered MoS2 can be divided into two domains corresponding to “point defects” at low concentrations of surface S vacancies (Stage 1) and large regions of undercoordinated Mo atoms for high concentrations of surface S vacancies (Stage 2). The highest performance is obtained for Stage 2 in the presence of undercoordinated Mo atoms with a TOF of ∼2 s–1 at an overpotential of 160 mV in 0.1 M KOH which compares favorably to the best results in the literature. Overall, our work provides deeper insight on the HER mechanism from defected MoS2 and provides guidance for the development of defect-engineered TMD-based electrocatalysts.

Polyunsaturated fatty acids (PUFAs) are structural components of membrane phospholipids, and influence cellular function via effects on membrane properties, and also by acting as a precursor pool for lipid mediators. These lipid mediators are formed via activation of pathways involving at least one step of dioxygen-dependent oxidation, and are consequently called oxylipins. Their biosynthesis can be either enzymatically-dependent, utilising the promiscuous cyclooxygenase, lipoxygenase, or cytochrome P450 mixed function oxidase pathways, or nonenzymatic via free radical-catalyzed pathways. The oxylipins include the classical eicosanoids, comprising prostaglandins, thromboxanes, and leukotrienes, and also more recently identified lipid mediators. With the advent of new technologies there is growing interest in identifying these different lipid mediators and characterising their roles in health and disease. This review brings together contributions from some of those at the forefront of research into lipid mediators, who provide brief introductions and summaries of current understanding of the structure and functions of the main classes of nonclassical oxylipins. The topics covered include omega-3 and omega-6 PUFA biosynthesis pathways, focusing on the roles of the different fatty acid desaturase enzymes, oxidized linoleic acid metabolites, omega-3 PUFA-derived specialized pro-resolving mediators, elovanoids, nonenzymatically oxidized PUFAs, and fatty acid esters of hydroxy fatty acids.

Mild, efficient, copper-catalyzed N-arylation procedures for nitrogen heterocycles, amides, carbamates, and C-arylation procedures for malonic acid derivatives have been developed that afford high yields of arylated products with excellent selectivity. The N-arylation of imidazole with aryl bromides or iodides was found to be greatly accelerated by inexpensive, air-stable catalyst systems, combining catalytic copper salts or oxides with a set of structurally simple chelating ligands. The reaction was shown to be compatible with a broad range of aryl halides, encompassing sterically hindered, electron-poor, and electron-rich ones, providing the arylated products under particularly mild conditions (50-82 degrees C). The lower limit in ligand and catalyst loading and the scope of Ullmann-type condensations catalyzed by complexes bearing those ligands with respect to the nucleophile class have also been investigated. Chelating Schiff base Chxn-Py-Al (1c) generates a remarkably general copper catalyst for N-arylation of pyrrole, indole, 1,2,4-triazole, amides, and carbamates; and C-arylation of diethyl malonate, ethyl cyanoacetate, and malononitrile with aryl iodides under mild conditions (50-82 degrees C). The new method reported here is the most successful to date with regard to Ullmann-type arylation of some of these nucleophiles.