Institut de Chimie Séparative de Marcoule

Plasma-liquid interactions represent a growing interdisciplinary area of research involving plasma science, fluid dynamics, heat and mass transfer, photolysis, multiphase chemistry and aerosol science. This review provides an assessment of the state-of-the-art of this multidisciplinary area and identifies the key research challenges. The developments in diagnostics, modeling and further extensions of cross section and reaction rate databases that are necessary to address these challenges are discussed. The review focusses on non-equilibrium plasmas.

E-waste generated from end-of-life spent lithium-ion batteries (LIBs) is increasing at a rapid rate owing to the increasing consumption of these batteries in portable electronics, electric vehicles, and renewable energy storage worldwide. On the one hand, landfilling and incinerating LIBs e-waste poses environmental and safety concerns owing to their constituent materials. On the other hand, scarcity of metal resources used in manufacturing LIBs and potential value creation through the recovery of these metal resources from spent LIBs has triggered increased interest in recycling spent LIBs from e-waste. State of the art recycling of spent LIBs involving pyrometallurgy and hydrometallurgy processes generates considerable unwanted environmental concerns. Hence, alternative innovative approaches toward the green recycling process of spent LIBs are essential to tackle large volumes of spent LIBs in an environmentally friendly way. Such evolving techniques for spent LIBs recycling based on green approaches, including bioleaching, waste for waste approach, and electrodeposition, are discussed here. Furthermore, the ways to regenerate strategic metals post leaching, efficiently reprocess extracted high-value materials, and reuse them in applications including electrode materials for new LIBs. The concept of "circular economy" is highlighted through closed-loop recycling of spent LIBs achieved through green-sustainable approaches.

In recent years, Pickering emulsions and their applications have attracted a great deal of attention due to their special features, which include easy preparation and enhanced stability. In contrast to classical emulsions, in Pickering emulsions, solid microparticles or nanoparticles that localize at the interface between liquids are used as stabilizers, instead of surfactants, to enhance the droplet lifetime. Furthermore, Pickering emulsions show higher stability, lower toxicity, and stimuli-responsiveness, compared with emulsions that are stabilized by surfactants. Therefore, they can be considered attractive components for various uses, such as photocatalysis and the preparation of new materials. Moreover, the nanoparticle morphology strongly influences Pickering emulsion stability as well as the potential utilization of such emulsions. Here, we review recent findings concerning Pickering emulsions, with a particular focus on how the nanoparticles morphology (i.e., cube, ellipsoid, nanosheet, sphere, cylinder, rod, peanut) influences the type and stability of such emulsions, and their current applications in different fields such as antibacterial activity, protein recognition, catalysis, photocatalysis, and water purification.

Our understanding of the ``long range'' electrodynamic, electrostatic, and polar interactions that dominate the organization of small objects at separations beyond an interatomic bond length is reviewed. From this basic-forces perspective, a large number of systems are described from which one can learn about these organizing forces and how to modulate them. The many practical systems that harness these nanoscale forces are then surveyed. The survey reveals not only the promise of new devices and materials, but also the possibility of designing them more effectively.

Bligh and Dyer (B & D) or Folch procedures for the extraction and separation of lipids from microorganisms and biological tissues using chloroform/methanol/water have been used tens of thousands of times and are “gold standards” for the analysis of extracted lipids. Based on the Conductor-like Screening MOdel for realistic Solvatation (COSMO-RS), we select ethanol and ethyl acetate as being potentially suitable for the substitution of methanol and chloroform. We confirm this by performing solid–liquid extraction of yeast (Yarrowia lipolytica IFP29) and subsequent liquid–liquid partition—the two steps of routine extraction. For this purpose, we consider similar points in the ternary phase diagrams of water/methanol/chloroform and water/ethanol/ethyl acetate, both in the monophasic mixtures and in the liquid–liquid miscibility gap. Based on high performance thin-layer chromatography (HPTLC) to obtain the distribution of lipids classes, and gas chromatography coupled with a flame ionisation detector (GC/FID) to obtain fatty acid profiles, this greener solvents pair is found to be almost as effective as the classic methanol–chloroform couple in terms of efficiency and selectivity of lipids and non-lipid material. Moreover, using these bio-sourced solvents as an alternative system is shown to be as effective as the classical system in terms of the yield of lipids extracted from microorganism tissues, independently of their apparent hydrophilicity.

The Eu3⊕- and Tb3⊕-cryptates of the ligands 1–3 can function as molecular light converters. The complexes give characteristic 1H-NMR spectra, and the Eu3⊕-cryptate can be electrochemically reversibly reduced (−535 mV vs SCE).

We present a procedure that allows a reliable determination of the elastic (Young's) modulus of soft samples, including living cells, by atomic force microscopy (AFM). The standardized nanomechanical AFM procedure (SNAP) ensures the precise adjustment of the AFM optical lever system, a prerequisite for all kinds of force spectroscopy methods, to obtain reliable values independent of the instrument, laboratory and operator. Measurements of soft hydrogel samples with a well-defined elastic modulus using different AFMs revealed that the uncertainties in the determination of the deflection sensitivity and subsequently cantilever's spring constant were the main sources of error. SNAP eliminates those errors by calculating the correct deflection sensitivity based on spring constants determined with a vibrometer. The procedure was validated within a large network of European laboratories by measuring the elastic properties of gels and living cells, showing that its application reduces the variability in elastic moduli of hydrogels down to 1%, and increased the consistency of living cells elasticity measurements by a factor of two. The high reproducibility of elasticity measurements provided by SNAP could improve significantly the applicability of cell mechanics as a quantitative marker to discriminate between cell types and conditions.

Microemulsions, as thermodynamically stable mixtures of oil, water, and surfactant, are known and have been studied for more than 70 years. However, even today there are still quite a number of unclear aspects, and more recent research work has modified and extended our picture. This review gives a short overview of how the understanding of microemulsions has developed, the current view on their properties and structural features, and in particular, how they are related to applications. We also discuss more recent developments regarding nonclassical microemulsions such as surfactant-free (ultraflexible) microemulsions or ones containing uncommon solvents or amphiphiles (like antagonistic salts). These new findings challenge to some extent our previous understanding of microemulsions, which therefore has to be extended to look at the different types of microemulsions in a unified way. In particular, the flexibility of the amphiphilic film is the key property to classify different microemulsion types and their properties in this review. Such a classification of microemulsions requires a thorough determination of their structural properties, and therefore, the experimental methods to determine microemulsion structure and dynamics are reviewed briefly, with a particular emphasis on recent developments in the field of direct imaging by means of electron microscopy. Based on this classification of microemulsions, we then discuss their applications, where the application demands have to be met by the properties of the microemulsion, which in turn are controlled by the flexibility of their amphiphilic interface. Another frequently important aspect for applications is the control of the rheological properties. Normally, microemulsions are low viscous and therefore enhancing viscosity has to be achieved by either having high concentrations (often not wished for) or additives, which do not significantly interfere with the microemulsion. Accordingly, this review gives a comprehensive account of the properties of microemulsions, including most recent developments and bringing them together from a united viewpoint, with an emphasis on how this affects the way of formulating microemulsions for a given application with desired properties.

Selective hydrogenation of phenol to cyclohexanol in the aqueous phase was achieved using a new catalytic system based on palladium particles supported on hydrophilic carbon prepared by one-pot hydrothermal carbonisation.

Ternary solutions containing one hydrotrope (such as ethanol) and two immiscible fluids, both being soluble in the hydrotrope at any proportion, show unexpected solubilization power and allow strange but yet unexplained membrane enzyme activity. We study the system ethanol-water-octanol as a simple model of such kinds of ternary solutions. The stability of "detergentless" micelles or microemulsions in such mixtures was proposed in the pioneering works of Barden and coworkers [Smith GD, Donelan CE, Barden RE (1977)J Colloid Interface Sci60(3):488-496 and Keiser BA, Varie D, Barden RE, Holt SL (1979)J Phys Chem83(10):1276-1281] in the 1970s and then, neglected, because no general explanation for the observations was available. Recent direct microstructural evidence by light, X-ray, and neutron scattering using contrast variation reopened the debate. We propose here a general principle for solubilization without conventional surfactants: the balance between hydration force and entropy. This balance explains the stability of microemulsions in homogeneous ternary mixtures based on cosolvents.

Sandwiched: The cobaltabisdicarbollide (mono-)anion ([3,3′-Co(1,2-C2B9H11)2]−, COSAN−) forms monolayer vesicles at low concentrations in water (see picture). An increase in concentration leads to a Coulomb explosion of the closely packed vesicles into small micelles, which results in the coexistence of both aggregation states at higher concentrations.

A new approach to an efficient and selective extraction of Cs+ ions from water, sea water enriched with Cs+ and a radioactive solution simulating the effluents of the Fukushima reactors (137Cs, 29 kBq L−1) was developed by using porous silica- or glass-based nanocomposites containing Prussian blue type nanoparticles, Co2+/[Fe(CN)6]3−, with sizes below 10 nm. A particular emphasis is given on the kinetics of cesium sorption fitted by using the classical reaction order model as well as a diffusion model in order to better understand the sorption mechanism. Compared to the amount of Co2+/[Fe(CN)6]3− nanoparticles, the sorption capacities of studied nanocomposites are more than three times higher than the ones observed for the respective bulk materials. These nanocomposites present a high selectivity to Cs+ and extract it in trace amounts.

Monazite (Ln3+PO4) and related solid solutions are a well-known source of rare earth elements on earth. They may also accommodate large amounts of thorium and uranium without sustaining damage to the structure by self-irradiation. Such observations led to monazite-type structures being proposed as a potential host matrix for sequestering long-lived radionuclides produced during the nuclear fuel cycle and/or plutonium and americium from dismantled nuclear weapons. Monazite has two main advantages as a matrix for the containment of radioactive waste (or “radwaste”). The first is a highly flexible structure that permits accommodation of high concentrations of actinides. The incorporation of trivalent elements may be achieved by direct synthesis of An3+PO4 (An3+ = plutonium, Pu to einsteinium, Es), while tetravalent cation incorporation requires coupled substitutions, either on the anionic site (leading to monazite-huttonite solid solution) or on the cationic site (monazite-cheralite solid solution). Various methods developed for the preparation of such compounds are summarized here, as well as the experimental conditions required for the production of sintered pellets, with a particular focus on plutonium-bearing compositions. The second highly favorable property of monazite is its high chemical durability. Several experimental procedures developed to determine normalized leaching rates are reviewed, as well as results obtained from natural and synthetic monazite. Potential phases formed during dissolution were considered because they also partially control the concentration of actinides in the media. A preliminary list for such phases of interest, as well as corresponding thermodynamic data, is presented.

Finding suitable (transportable) storage devices for hydrogen is one of the key points to really access the foreseen “hydrogen economy”. While numerous studies are devoted to finding inorganic materials enabling the storage of hydrogen with high energy densities under “mild” conditions, relatively less effort has been focused on the search for purely organic storage solutions. This review aims to focus on these pioneering works.

The development of environmentally benign hydrometallurgical processes to treat spent lithium-ion batteries (LIBs) is a critical aspect of the electronic-waste circular economy. Herein, as an alternative to the highly explosive H2O2, discarded orange peel powder (OP) is valorized as a green reductant for the leaching of industrially produced LIBs scraps in citric acid (H3Cit) lixiviant. The reductive potential of the cellulose- and antioxidant-rich OP was validated using the 3,5-dinitrosalicylic acid and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic) acid assays. Leaching parameters such as OP concentration (200 mg), processing temperature (100 °C), H3Cit concentration (1.5 M), reaction duration (4 h), and slurry density (25 g/mL) were systematically optimized to achieve 80–99% leaching efficiencies of Ni, Mn, Co, and Li from the LIB “black mass”. Importantly, solid side-streams generated by the OP-enabled leaching displayed negligible cytotoxicity in three different human cell lines, suggesting that the process is environmentally safe. As a proof of concept, Co(OH)2 was selectively recovered from the green lixiviant and subsequently utilized to fabricate new batches of LiCoO2 (LCO) coin cell batteries. Galvanostatic charge–discharge test revealed that the regenerated batteries exhibited initial charge and discharge values of 120 and 103 mAh/g, respectively, which is comparable to the performance of commercial LCO batteries. The use of fruit peel waste to recover valuable metals from spent LIBs is an effective, ecofriendly, and sustainable strategy to minimize the environmental footprint of both waste types.

Time-resolved rheology, small angle X-ray scattering (SAXS), and electron paramagnetic resonance (EPR) techniques were used to study the polymerization of geopolymers. These polymers are inorganically synthesized by the alkaline activation of an aluminosilicate source (metakaolin) in aqueous solution. The influence of the alkali activator (Na(+), K(+), and Cs(+)) was investigated at room temperature. As observed through the variation of the viscoelastic moduli (G', G"), curing proceeds in steps that are well pronounced when NaOH is used. These steps correspond to a specific dissolution/polycondensation mechanism and are smoothed when the size of the alkali cations increases. This size effect also has an impact on the gelation time (maximum of tan δ). Structural analysis through SAXS experiments allows us to characterize these mechanisms on the nanoscale and to show that the growth of the geopolymer is due to the aggregation of oligomers with a size that is even smaller than the cation is chaotropic. Finally, water behavior during geopolymerization was assessed by using a spin probe. The results show that the spin-probe signal progressively disappears during the first moment of the reaction and reappears when the solid polymeric gel is formed, highlighting the role of water molecules in the different chemical reactions during the process. The EPR signal is in fact increasingly masked as the ion size decreases (because of the strength of the hydration shell). At the end of the reaction, some water molecules were released within the pores, restoring the visibility of the isotropic spin-probe signal.

In this investigation we present for the first time microemulsions comprising an ionic liquid as surfactant and a room-temperature ionic liquid as polar pseudo-phase. Microemulsions containing the long- chain ionic liquid1-hexadecyl-3-methyl-imidazolium chloride ([C16mim][Cl]) as surfactant, decanol as cosurfactant, dodecaneas continuous phase and room temperature ionic liquids (ethylammonium nitrate (EAN) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]][BF4]), respectively) as polar microenvironment have been formulated. The phase diagrams of both systems were determined at a constant surfactant/cosurfactant molar ratio. EAN microregions in oil have been confirmed with conductivity measurements. In presence of EAN a model of dynamic percolation could be applied. Dynamic light scattering (DLS) measurements indicated a swelling of the formed nano-structures with increasing amount of EAN, a linear dependence of the hydrodynamic radii on the EAN weight fraction was observed. Both systems exhibited a single broad peakin SAXS and follow a characteristic q-4 dependence of the scattering intensity at large q values. The Teubner-Strey model was successfully used to fit the spectra giving fa, the amphiphilic factor, and the two characteristic length scales of microemulsions, namely the periodicity, d, and the correlation length, zeta. Furthermore, the specific area of the interface could be determined from the Porod limit and the experimental invariant. The amphiphilic factor clearly demonstrated structural differences between the two systems confirming that the nature of the polar ionic liquid plays an important role on the rigidity of the interfacial film. The adaptability of three different models ranging from spherical ionic liquid in oil over repulsive spheres to bicontinuous structures has been checked.

Polyoxometalates (POMs) are nanometric metal–oxide anions with unique chemical and physical properties. During the past decade, significant efforts have been made to give POMs surface activity and self-assembly properties that are essential for catalysis applications and for producing organic–inorganic hybrid materials. In this work, POMs-based surfactants are produced spontaneously through noncovalent interactions in water by mixing nonionic surfactants with POM. The most common POMs of tungstosilicate and tungstophosphate have indeed an unexpected strong tendency to adsorb on polar and neutral interfaces. Micelles in water and water/air interfaces were investigated by SAXS and ion flotation showing the POM anions adsorbed at the micelle surface and on monolayers of nonionic surfactants. This general property of POM provides a unique opportunity for deeper understanding of many medicinal effects of POMs, i.e., their antiviral and antitumor activities that involve their specific adsorption on biological surfaces.

The sustainability through the energy and environmental costs involve the development of new cathode materials, considering the material abundance, the toxicity, and the end of life. Currently, some synthesis methods of new cathode materials and a large majority of recycling processes are based on the use of acidic solutions. This study addresses the mechanistic and limiting aspects on the dissolution of the layered LiNi1/3Mn1/3Co1/3O2 oxide in acidic solution. The results show a dissolution of the active cathode material in two steps, which leads to the formation of a well-defined core–shell structure inducing an enrichment in manganese on the particle surface. The crucial role of lithium extraction is discussed and considered as the source of a “self-regulating” dissolution process. The delithiation involves a cumulative charge compensation by the cationic and anionic redox reactions. The electrons generated from the compensation of charge conduct to the dissolution by the protons. The delithiation and its implications on the side reactions, by the modification of the potential, explain the structural and compositional evolutions observed toward a composite material MnO2·LixMO2 (M = Ni, Mn, and Co). The study shows a clear way to produce new cathode materials and recover transition metals from Li-ion batteries by hydrometallurgical processes.

Knowing the structure of a material is necessary to understand its evolution under various influences; here, the alteration by water of a reference glass of nuclear interest, called International Simple Glass (ISG), is studied. The ISG atomic structure has not yet been thoroughly characterized. Short- and medium-range order in this six-oxide glass was investigated by molecular dynamics (MD) methods. Combining the simulated data with experimental observations acquired from both pristine and altered ISG provided new insight into the formation of surface layers and passivation of the underlying glass. In the tested conditions of 90 °C, silica-saturated solution, and pH 90°C 7, the passivating layer partly inherits the structure of the pristine glass network despite the release of mobile elements (Na, B, and some Ca), with a reorganization of the silicate network following B release. The layer appears to minimize its internal energy by relaxing strain accumulated during glass quenching. The resulting passivated glass shows a strong resistance to hydrolysis. The nanopores of this hydrated material, displaying a mean pore size of ∼1 nm, are filled with various water species. Water speciation determination inside the nanopores is therefore an achievement for future water dynamic study in the passivated glass.